JETI model duplex Bedienungsanleitung
COMPLEX RADIO CONTROL SYSTEM
User ManualUser ManualUser Manual
EN
Receivers Rx Receivers Rx Receivers Rx
®
COMPLEX RADIO CONTROL SYSTEM
COMPLEX RADIO CONTROL SYSTEM
1. Introduction ......................................................................................... 03
2. Technical data ...................................................................................... 05
2.1 Technical data of receivers outside the US ............................. 05
2.2 Technical data of receivers for the US ...................................... 07
3. Installation ........................................................................................... 09
3.1 Voltage Supply ........................................................................... 09
3.2 Operation ..................................................................................... 09
3.3 Binding .......................................................................................... 10
3.4 Receiver R7nano .......................................................................... 11
4. Real Time Telemetry ........................................................................... 13
4.1 EX Telemetry ................................................................................. 13
4.2 - 1st Generation ........................................................................... 13
ENGLISH
1
EN
COMPLEX RADIO CONTROL SYSTEM
5. Receiver setup ..................................................................................... 14
5.1 Receiver Setup via the JETIBOX ................................................. 14
5.1.1 Direct connection between a JETIBOX and .
the receiver ......................................................................... 14
5.1.2 Wireless connection between a JETIBOX with .
transmitter or DC/DS transmitter and the receiver ...... 14
5.2 Receiver set-up via the DC/DS transmitter ............................ 15
6. Receiver Menu ......................................................................................... 16
6.1 Overview of receiver data items ............................................ 16
6.2 Measure ....................................................................................... 16
6.3 Main setting ................................................................................. 17
6.4 Out pin set .................................................................................... 21
6.5 R4 RES ......................................................................................... 26
6.6 Reset to factory defaults ............................................ 29
7. Receiver update ...................................................................................... 29
EN
2
COMPLEX RADIO CONTROL SYSTEM
extended serie
JETI Duplex receivers are designated for use with the DC/DS
transmitters or the JETI transmitter modules in the 2.4 GHz
frequency band. Duplex receivers are offered in a wide range of
size and features to suit the numerous demands of our customers.
The Duplex receivers range from the tiny Duplex R3L, R5L
receivers for small and medium model sizes to the R9, R11EPC
receivers for larger models. Last but not least, the R14 and R18
receivers are available for giant or really complex models.
Receivers
1 Introduction ENGLISH
EN
3
COMPLEX RADIO CONTROL SYSTEM
The legacy Duplex system was designed to give maximum
dependability, a property which has proven itself through many
successful years of use. Based on user input, the system is
continuously improved. Thanks to online updates the
improvements are easily accessible to users from any part of the
world. From the very beginning bidirectional transmission has
been a distinctive feature of the Duplex system, this not only
handles telemetry data, but it also helps to ensure secure primarily
transmission safety between the transmitter and receiver.
The Duplex EX telemetry system uses an open protocol. This gives
the advantage of compatibility with a large number of telemetry
sensors from both JETI model and third party producers. For the
display of telemetry data you can use purposely designed
equipment like the JETIBOX profi and DC/DS transmitters or you
can display the data on PCs .
Although our development of the Duplex system seems to be very
fast, we make the extra effort to keep backward compatibility with
earlier Duplex versions. By design, users are not forced to
continually buy new equipment to take advantage of the latest
improvements.
The JETI model company portfolio contains a diverse offering of
electronic modelling equipment like voltage regulators, motor
speed controllers, telemetry data display equipment, telemetry
sensors and, last but not least, DC/DS transmitters. The JETI
model product manfacturing policy is to constantly produce the
highest quality product possible.
EN
4
COMPLEX RADIO CONTROL SYSTEM
2.1 Technical data of receivers outside the US part 1
2 Technical data
EN
5
Basic Data
R4 RES
R5L
R7 nano
R9
Dimension [mm]
40x22x7
47x20x7
30x18x5
51x24x11
Weight [g]
8
5,4
2
13
Antenna length [mm]
2x100
2x100
1x30
2x200
No. of channel outputs
4
5
7
9
Temperature range [°C]
-10 up to
+85
-10 up to
+85
-10 up to
+85
-10 up to
+85
Supply voltage [V]
3.5 – 8.4
3.5 – 8.4
3.5 – 8.4
3.5 – 8.4
Average current [mA]
75
30
20
30
Real time transmission
of telemetry data
No
Yes
Yes
Yes
Programming
DC/DS
JetiBox
DC/DS
JetiBox
DC/DS
JetiBox
DC/DS
Satellite receiver
(Rsat) support
No
No
No
Yes
Power output [dBm]
15
15
6
15
Receiver sensitiviy
[dBm]
-106
-106
-98
-106
COMPLEX RADIO CONTROL SYSTEM
2.1 Technical data of receivers outside the US part 2
* xternal ower onnector E P C
EN
6
Basic Data
R14*
R18*
Rsat2
Dimension [mm]
62x38x16
62x38x16
35x23x6
Weight [g]
30
30
12
Antenna length [mm]
2x400
2x400
2x200
No. of channel outputs
14
18
Serial
communication
Temperature range [°C]
-10 up to
+85
-10 up to
+85
-10 up to
+85
Supply voltage [V]
3.5 – 8.4
3.5 – 8.4
3.5 – 8.4
Average current [mA]
40
40
30
Real time transmission
of telemetry data
Yes
Yes
Yes
Programming
JetiBox
DC/DS
JetiBox
DC/DS
JetiBox
DC/DS
Satellite receiver
(Rsat) support
Yes
Yes
-
Power output [dBm]
15
15
15
Receiver sensitiviy [dBm]
-106
-106
-106
COMPLEX RADIO CONTROL SYSTEM
Basic Data
R3
R4L
(R4L
indoor)
R5L
(R5L
indoor)
R6L
(R6L
indoor)
R7plus
Dimensions [mm]
10x22x7
38x20x7
47x20x7
43x24x11
51x24x11
Weight [g]
8
4,8 (4,5)
5,4 (5)
13
13
Antenna length [mm]
2x200
2x100
(2x45)
2x100
(2x45)
2x200
(2x50)
2x200
No. of channel outputs
4
4
5
6
7
Temperature range [°C]
-10 up
to +85
-10 up
to +85
-10 up
to +85
-10 up
to +85
-10 up
to +85
Supply voltage [V]
3.5 – 8.4
3.5 – 8.4
3.5 – 8.4
3.5 – 8.4
3.5 – 8.4
Average current [mA]
30
30
30
30
30
Real time transmission
of telemetry data
Yes
No
Yes
Yes
Yes
Programming
JetiBox
DC/DS
DC/DS
JetiBox
DC/DS
JetiBox
DC/DS
JetiBox
DC/DS
Satellite receiver
(Rsat) support
No
No
No
No
Yes
Power output [dBm]
15
15
15
15
15
Receiver sensitivity
[dBm]
-106
-106
-106
-106
-106
2.2 Technical data of receivers for the US part 1
EN
7
COMPLEX RADIO CONTROL SYSTEM
Basic Data
R9
R11 EPC*
R14*
R18*
Dimensions [mm]
51x24x11
51x24x11
62x38x16
62x38x16
Weight [g]
13
15
30
30
Antenna length [mm]
2x200
2x200
2x400
2x400
No. of channel outputs
9
11
14
18
Temperature range [°C]
-10 up to
+85
-10 up to
+85
-10 up to
+85
-10 up to
+85
Supply voltage [V]
3.5 – 8.4
3.5 – 8.4
3.5 – 8.4
3.5 – 8.4
Average current [mA]
30
30
40
40
Real time transmission of
telemetry data
Yes
Yes
Yes
Yes
Programming
JetiBox
DC/DS
JetiBox
DC/DS
JetiBox
DC/DS
JetiBox
DC/DS
Satellite receiver
(Rsat) support
Yes
Yes
Yes
Yes
Power output [dBm]
15
15
15
15
Receiver sensitivity [dBm]
-106
-106
-106
-106
2.2 Technical data of receivers for the US part 2
* xternal ower onnector E P C
EN
8
COMPLEX RADIO CONTROL SYSTEM
3.1 Voltage supply
When designing the on-board wiring for your project, always pay
attention to the voltage input range of your receivers and servos.
You can connect supply voltage to the Duplex receivers as
follows:
- directly from the batteries
- via a BEC voltage regulator (either contained in speed
controllers or self contained)
The supply may be connected to the Duplex receivers via:
- the throttle channel (when applying speed controllers with BEC)
- a free receiver output.
- a Y-cable to any arbitrary receiver output (other than the
„Ext.“)
- the MPX connector for receivers with the EPC label or the R14
and R18 receivers which are equipped with a power supply
connector
3.2 Operation
We recommend that you switch on the transmitter first and then
subsequently the receiver. The transmitter confirms the switching-
on of the receiver with an acoustic signal. When switching off the
system we recommend that you switch off the receiver first and
then subsequently proceed with switching-off the transmitter.
3 Installation
EN
9
Inhaltsverzeichnis
Andere JETI model Empfänger Handbücher
JETI model
JETI model Duplex REX12A Bedienungsanleitung
JETI model
JETI model DUPLEX R Series Bedienungsanleitung
JETI model
JETI model Duplex REX Series Bedienungsanleitung
JETI model
JETI model Duplex R4 RES Bedienungsanleitung
JETI model
JETI model Duplex REX Assist Series Bedienungsanleitung
JETI model
JETI model JETIR5iUS Bedienungsanleitung
