Jetson GEN 1 Bedienungsanleitung
1
GEN 1
-MANUAL-
2
TABLE OF CONTENTS
A. Introduction 3
B. Included In The Box 4
C. Features And Specs 5
D. Unboxing 6
E. Charging the Battery 7
F. Operating the Gen 1 8
1. Turning On and Off
2. Turning Lights On and Off
3. Turn Signal Lights
4. The Horn
5. Brake Levers
6. Pedals
7. Kickstand
8. LCD Display Screen
G. Safe Driving 13
H. Care and Maintenance 13
I. Safety Warnings 15
J. Warranty 17
K. Product Registration 18
3
Congratulations on your new Jetson Gen 1! The Gen 1 is an innovative and fun
personal transportation device, ready to take on everyday use. Before your rst
ride, check whether the wheels are damaged, or parts are loose. If there are
any abnormalities, please contact Jetson Customer Support at 1-(888) 976-
9904 or email us at customerservice@jetsonbike.com.
This product manual can help you understand, use, and maintain your Gen 1. In
order to avoid danger caused by collisions, falls, and loss of control, please use
caution and learn how to ride the Gen 1 safely. Jetson and authorized dealers
cannot be held liable for injury or damage caused from riding the Gen 1. Users
ride at their own risk.
The rider is responsible for consequences caused by violating warnings or
improper operations.
If you want to return this product for any reason, be sure to rst call or email us
before taking it back to the store so we can assist you.
INTRODUCTION
4
INCLUDED IN THE BOX
1. Front LED Headlight
2. Hook
3. Charging Port
4. Seat
5. Seat Cask Lock
6. Rear Handle
7. Motor
8. Rear Brake
9. Chain
10. Pedal
11. Deck
12. Front Brake
1
45
6
89
10
11
12 7
3
2
5
FEATURES AND SPECS
MODEL: GEN 1
WHEEL SIZE: 18”
MAX SPEED: 20 MPH
MAX RANGE: 30-40 MILES
BATTERY TYPE: LITHIUM ION
BATTERY RATED VOLTAGE: 48V, 17Ah
MOTOR TYPE: BRUSHLESS
MOTOR: 500w
CHARGER: 110-240V
CHARGE TIME: 4-5 HOURS
PRODUCT WEIGHT: 125 LBS
WEIGHT LIMIT: 300 LBS
REMOVABLE BATTERY: YES
RECOMMENDED AGE: 18+
1. Kickstand
2. Turn Signal Lights
3. Horn
4. Rear Brake Lever
5. Turn Signal Switch
1
2
6
10
4
6. LCD Display
7.Headlight, Taillight, High Beam Switch
8. Twist Throttle
9. Front Brake Lever
10. Taillight
9
2
3
75
3
8
6
UNBOXING
After removing the cardboard carton, you will have to remove the metal crate
from around the Gen 1. Using the provided tools, unbolt each metal bar from
the top of the crate then unbolt the metal clasps hooked onto the Handlebars
of the Gen 1. Be careful not to scratch the frame of the Gen 1. Please check the
cardboard carton and metal crate for loose parts before discarding.
The Gen 1 comes fully assembled, except for the side mirrors.
To assemble the Side Mirrors, place the stem of the Side Mirrors into the holes
of the Handlebars and turn until secure using the included tools.
Gen 1 with mirrors
7
CHARGING THE BATTERY
Your Gen 1 comes with a built-in rechargeable lithium battery. Always use
the provided charger only. Before your rst ride you must fully charge the
Gen 1 - charge for 12 hours for the rst 3 times you use it. For every ride after,
charge your Gen 1 until it is fully charged, and NOT LONGER. Do not leave any
chargers plugged in overnight, or leave it plugged in past the charge time. The
extension cord should not be plugged directly into the Gen 1 or the battery. It
needs to be plugged into the power supply. You can also charge the Gen 1 by
disconnecting the battery from under the seat and then charging the battery
directly.
1. Plug one end of the power cord into a grounded AC outlet and the other
into the Gen 1’s charging port. The red charging light on the charger unit will
turn on.
2. The red light will turn green once fully charged. Recharge the Gen 1 after
each use.
(Please note: Always plug the charger into the wall rst before the device. If the
wall outlet doesn’t have power and you plug the charger into the device rst, it
will light green, even if the battery is not full. So always plug into the wall rst to
make sure there is power.)
THE CHARGER OFFERS A CHARGING STATUS ON THE TOP OF THE
CHARGER:
CHARGING LIGHT RED: Battery is charging.
CHARGING LIGHT GREEN: Charging is complete.
Charge the battery when the Gen 1 displays low power. When you are done
charging the battery, remember to cover the Charging Port.
Don’t use the Gen 1 if the battery emits strange odors, overheats, or begins
leaking. If the battery does leak, do not touch any leaking materials, as the
battery contains dangerous substances. Do not open the battery and do not
insert anything into the battery.
Only use the provided charger for the Gen 1. Do not charge the battery if it has
over-discharged. It should be discarded for your safety. Do not turn on the Gen
1 while it is charging.
8
TURNING ON AND OFF
To turn the Gen 1 On, unlock the Seat Cask using the provided key in the
lock on the left side of the Seat Cask. Lift the Seat and locate thecircuit
switch. Switch it to On. (It is recommended to turn off the circuit switch when
transporting or storing the Gen 1). Close the Seat and press down rmly to
make sure it is secure. Place the provided key in the Ignition and turn clockwise.
OPERATING THE GEN 1
Turning the
Gen 1 On
9
TURNING LIGHTS ON AND OFF
To turn the Headlight and Taillight on, ip the switch on the right handlebar
to the left. One click to the left turns on the Headlight and Taillight. Two clicks
to the left turns on the Headlight, the Taillight, and the High Beam. There are
two functions for the High Beam. The High Beam switch is located on the
Left Handlebar. Flipping the High Beam Switch up will raise the High Beam.
Flipping the High Beam Switch down will lower the High Beam.
To turn your Gen 1 off, make sure it is not in motion, then turn the key counter
clockwise. Once the key is removed from the Ignition, unlock the Seat Cask and
turn the battery switch to Off.
Turning the
Gen 1 Off
High Beam
Function
Switch
Headlight,
Taillight, and
High Beam
On/ Off
Switch
10
THE HORN
There are two Horn Buttons on the Gen 1, one button is on each Handlebar.
Press either button or both to sound the Horn.
TURN SIGNAL LIGHTS
The switch to use the Turn Signal Lights is on the Left Handlebar. Flip the switch
to the left to turn on the Left Turn Signal Lights and ip the switch to the right to
turn on the Right Turn Signal Lights. When the Turn Signal Lights are activated,
you will also hear a beeping sound.
To turn off the Turn Signal Lights and the beeping sound, press the off button
in the center of the switch.
BRAKE LEVERS
There are two Brake Levers on the Gen 1. The Left Brake Lever is for the Rear
Tire. The Right Brake Lever is for the Front Tire.
Inhaltsverzeichnis
Andere Jetson Roller Handbücher
Jetson
Jetson E-POCKET Bedienungsanleitung
Jetson
Jetson Jupiter Jumbo Bedienungsanleitung
Jetson
Jetson Journey 3.0 Bedienungsanleitung
Jetson
Jetson BOLT Bedienungsanleitung
Jetson
Jetson JBZL17 Bedienungsanleitung
Jetson
Jetson Triton Bedienungsanleitung
Jetson
Jetson JAQUA-GRN Bedienungsanleitung
Jetson
Jetson Element Pro Bedienungsanleitung
Jetson
Jetson Relay Bedienungsanleitung
Jetson
Jetson Obsidian Kick Scooter Bedienungsanleitung
Jetson
Jetson JIMPULSE-WHT Bedienungsanleitung
Jetson
Jetson JUPITER Bedienungsanleitung
Jetson
Jetson SATURN Bedienungsanleitung
Jetson
Jetson J8 Bedienungsanleitung
Jetson
Jetson JQUEST-BLK Bedienungsanleitung
Jetson
Jetson Element Pro Bedienungsanleitung
Jetson
Jetson Helio X Bedienungsanleitung
Jetson
Jetson JETKART 2.0 Bedienungsanleitung
Jetson
Jetson TEMPO Bedienungsanleitung
Jetson
Jetson MARVEL Spiderman Edition JSPMN-ELE Bedienungsanleitung
Beliebte Roller Handbücher anderer Marken
equipmed
equipmed FreeRoam II Bedienungsanleitung
Yoto
Yoto Lion Bedienungsanleitung
WESTHILL BIKES
WESTHILL BIKES LINK Bedienungsanleitung
BAnff
BAnff eProdigy series Bedienungsanleitung
Winther
Winther 475 Bedienungsanleitung
First Choice Mobility
First Choice Mobility Roma Medical Corella S741 Bedienungsanleitung
