JL Audio Stealthbox SB-N-FRNTCC/10W1v2 Bedienungsanleitung

INSTALLATION GUIDE

for the

SB-N-FRNTCC/10W1v2

2005 - Up

Nissan Frontier CrewCab Trucks

Thank you for choosing a JL Audio Stealthbox®for your automotive sound system. With proper

installation, your new vehicle-specific enclosed subwoofer system will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox®installed by your authorized JL Audio

dealer. The installation professionals employed by your dealer have the necessary tools and experience

to disassemble and reassemble your vehicle properly. Also, keep in mind that your warranty coverage

extends to 1 year if your system is installed or approved by your authorized JL Audio dealer. If you

prefer to perform your own installation, please read this installation guide completely

before beginning the process.

If you choose to perform the installation yourself, it is absolutely vital that

the Stealthbox®be properly mounted to the vehicle according to these

instructions. Failure to mount the enclosure properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the enclosure

caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a collision

or sudden deceleration.

STEP 1

Remove both storage bins from under the rear seat.

If the truck is not equipped with the factory woofer, go to

STEP 4.

Continued on Next Page

STEP 2

Using a 10mm socket, remove the three mounting bolts that

secure the factory woofer enclosure to the truck’s floor.

STEP 3

Using a 10mm socket, remove the two mounting bolts that

secure this mounting bracket to the truck’s floor.

Tuck the factory speaker wire under the carpet and out of

the mounting area of the Stealthbox®.

SB-N-FRNTCC/10W1v2_INSTR_SKU#011229

INSTALLATION

DIFFICULTY:

OUT

ESTIMATED TIME:

1 HOUR

Continued on Next Page

SB-N-FRNTCC/10W1v2_INSTR_SKU#011229

STEP 7

Place the Stealthbox® into the mounting location.

Use a supplied 3/8-inch bolt to secure the long end of the

Z-bracket to the top of the Stealthbox®. Only hand tighten at

this time.

STEP 6

Trucks that are equipped with the factory woofer.

Use the supplied 6mm bolt to secure the short end of the

supplied Z-bracket to the floor, as in the picture. Only hand

tighten at this time.

Trucks that are not equipped with the factory woofer.

Feel for a mounting point that is located under the carpet

and on the floor area that slopes up. Once found, cut the car-

pet around this mounting point. Use the supplied 6mm bolt

to secure the short end of the supplied Z-bracket to the floor.

Only hand tighten at this time.

STEP 5

Place the middle of the wax square into place, shown in the

picture.

STEP 4

Remove the sill plate.

Page 2 • JL Audio, Inc 2006

STEP 10

Note: Before drilling, make sure that you are not going

to be drilling into any gas lines, brake lines, transmission

lines, electrical wiring, transfer case (4x4 vehicles)

or anything else that might cause a reduction in your

weekly pay. Always wear eye protection when drilling!

With a 1/2-inch drill bit and drill, place the drill bit through

wax square and the carpeting at the impression made in

the wax square. Drill through the metal floor. Remove the

wax square.

STEP 12

Place the Stealthbox® into the mounting area.

Run speaker wire to the Stealthbox® and wire to the terminal.

Double check the woofer for proper operation.

Back out the socket cup set screw to expose 2-inches

Place the Stealthbox®into position by guiding the socket

cup set screw through the drilled hole.

STEP 11

Place the sill plate back into place.

STEP 8

Lower the seat down onto the Stealthbox®. Line up the top

corner of the Stealthbox®to the bottom corner of the seat.

Flip the seat up and push down onto the top of the

Stealthbox®.

Unbolt the Z-bracket and remove the Stealthbox®carefully,

leaving the wax square in place. The socket cup set screw

will leave an impression in the wax.

Using an utility knife, cut an “X” through the wax square at

the impression of the socket cup set screw and through the

carpet.

6-inches

5-inches

SB-N-FRNTCC/10W1v2_INSTR_SKU#011229

STEALTHBOX WALL THREADED INSERT

VEHICLE SHEET METAL

FENDER WASHER SOCKET CUP SET SCREW

LOCK WASHER

FLAT WASHER

HEX NUT

CONGRATULATIONS

You have completed the installation for this model!

Please refer to the Power Recommendation section for an

amplifier recommendation and basic set-up help.

STEP 15

Secure the passenger’s side storage bin.

STEP 14

From under the vehicle, place a supplied fender washer,

flat washer, lock washer and then hex nut onto the socket

cup set screw and secure.

Note: For added protection it is recommended that

you apply a bead of silicone between the vehicle and

the fender washer. After the bolt assembly is tightly

secured, it is also recommended that vehicle under-

coating material is applied to the exposed assembly

STEP 13

Place a supplied 3/8-inch lock washer and flat washer onto

the 3/8-inch bolt.

Place the supplied 6mm flat washer onto the 6mm bolt.

Using a socket, fully secure the Z-bracket to the truck’s

mounting point and on top of the Stealthbox®.

Page 3 • JL Audio, Inc 2006

All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered

trademarks of JL Audio, Inc.“Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.

JLA-SKU#011229-05-12-200

#6,243,479 #6,294,959 #6,501,844 #6,496,590 #6,441,685 #5,687,247 #6,219,431 #6,625,292 #D472,891 #D480,709 Other U.S. & Foreign

patents pending. For more detailed information please visit us online at www.jlaudio.com.

(954) 443-1100

www.jlaudio.com

10369 NORTH COMMERCE PARKWAY • MIRAMAR, FLORIDA • 33025 • USA

INCLUDED HARDWARE

(2)

Black Rubber Tapered Squares

(1)

3/8-inch -16 x 1 1/2-inch Bolt

(2)

3/8-inch Split Lock Washer

(1)

3/8-inch x 1 1/4-inch Fender Washer

(2)

3/8-inch Flat Washer

(1)

Z-Bracket

(1)

6mm x16mm Bolt

(1)

3-inch x 3-inch Wax Square

(1) 3/8-inch -16 Hex Nut

(1)

3/8-inch -16 x 2 1/4-inch Socket Cup Set Screw

(1)

6mm Flat Washer

SPECIFICATIONS

Enclosure Type:

Acoustic Suspension (sealed)

Driver Type:

10W1v2-4

Nominal Impedance:

4 ohms mono

Continuous Power Handling:

150 Watts

150 Wat ts

POWER RECOMMENDATION

JL Audio recommends using a high quality amplifier such as the JL Audio A2150.

The diagram below shows the recommended crossover, infrasonic filter and equalizer settings for the A2150 when

being used to power your Stealthbox®.

The JL Audio A2150 is a very versatile audio component. Please consult the owner’s manual for even more

detailed information about installing and tuning this amplifier.

MID/HIGH FREQUENCY DRIVER FITMENT

A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.

Front Speaker Size / Location:

6.5-inch / Front Doors

Fits JL Audio Models:

TR650-CXi, TR650-CSi, VR650-CXi, VR650-CSi, XR650-CXi, XR650-CSi,

C5-650x, C5-650 & ZR650-CSi

Rear Speaker Size / Location:

6.5-inch / Rear Doors

Fits JL Audio Models:

TR650-CXi, TR650-CSi, VR650-CXi, VR650-CSi, XR650-CXi, XR650-CSi,

C5-650x, C5-650 & ZR650-CSi

Dieses Handbuch passt für folgende Modelle

Andere JL Audio Subwoofer Handbücher

JL Audio

JL Audio e112 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-T-CAM/12W3v3 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-GM-TRLBLZR/10W3v3 Bedienungsanleitung

JL Audio

JL Audio 13TW5v2-2 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-POL-SLINGSUBD/10W3v3-4 Bedienungsanleitung

JL Audio

JL Audio 94606 Bedienungsanleitung

JL Audio

JL Audio Stealtbox SB-K-SL-12W0v2 Bedienungsanleitung

JL Audio

JL Audio M12IB6 Bedienungsanleitung

JL Audio

JL Audio 10WXv2 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-GM-TAHOCNSL/10W1v2 Bedienungsanleitung

JL Audio

JL Audio ACP1 08LG-W3v3 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-T-TCMAX/10TW3 Bedienungsanleitung

JL Audio

JL Audio 94350 Bedienungsanleitung

JL Audio

JL Audio 12W3v3-2 Bedienungsanleitung

JL Audio

JL Audio Stealthbox 5 Series Bedienungsanleitung

JL Audio

JL Audio 15W5 Speci?cations Bedienungsanleitung

JL Audio

JL Audio 8WI-4 Bedienungsanleitung

JL Audio

JL Audio Stealthbox SB-N-PTHFNDR/10W Bedienungsanleitung

JL Audio

JL Audio M121B6 Bedienungsanleitung

JL Audio

JL Audio Stealthbox Series Bedienungsanleitung

JL Audio

JL Audio Fathom IWSv2-SYS-113 Bedienungsanleitung

JL Audio

JL Audio 10W0v3-4 Bedienungsanleitung

JL Audio

JL Audio 10W3v2 Bedienungsanleitung

JL Audio

JL Audio M103EWS-CG-WH-R Bedienungsanleitung

Beliebte Subwoofer Handbücher anderer Marken

Sony

Sony XS-AW8 Bedienungsanleitung

Sony

Sony XS-L836 Bedienungsanleitung

B&C Speakers

B&C Speakers 15 HPL 76W Bedienungsanleitung

Velodyne

Velodyne DD-18+ Bedienungsanleitung

Sonance

Sonance Cinema Series SUB 10-150 Bedienungsanleitung

Hifonics

Hifonics HW-12 Kurzanleitung

Magnat Audio

Magnat Audio ADR 130 BP Bedienungsanleitung

Blitz

Blitz BZP106 Bedienungsanleitung

Technics

Technics SB-AS500 Bedienungsanleitung

Lyngdorf

Lyngdorf BW-2 Bedienungsanleitung

Lyngdorf

Lyngdorf BW-3 Bedienungsanleitung

Pyle Pro

Pyle Pro PYLE PRO PDW15125 Bedienungsanleitung

REL Acoustics

REL Acoustics Q Series Bedienungsanleitung

L-Acoustics

L-Acoustics KIVA SB15M Kurzanleitung

Pioneer

Pioneer Elite S-W1EX Bedienungsanleitung

B&C Speakers

B&C Speakers Woofer 12 HPL 76 Bedienungsanleitung

KEF

KEF KUBE 200 Bedienungsanleitung

Yamaha

Yamaha SW500 Bedienungsanleitung