JL Audio 94606 Bedienungsanleitung
INSTALLATION GUIDE
for the
SB-J-WRUD/10TW1
SKU# 94606 & 94608
2007-2017 Jeep Wrangler Unlimited
Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.
With proper installation, your new vehicle-specific enclosed subwoofer system
will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox® installed by your
authorized JL Audio dealer. The installation professionals employed by your
dealer have the necessary tools and experience to disassemble and reassemble
your vehicle properly. If you prefer to perform your own installation, please read
this installation guide completely before beginning the process.
If you choose to perform the installation yourself, it is absolutely vital
that the Stealthbox®be properly mounted to the vehicle according to
these instructions. Failure to mount the enclosure properly presents two
problems:
1) The sub-bass performance will suffer due to the movement of the
enclosure caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a
collision or sudden deceleration.
INSTALLATION
DIFFICULTY:
ESTIMATED TIME:
1 HOUR
Enclosure Type: Sealed
Driver Type: 10T W1
Nominal Impedance: 4 ohms
Continuous Power Handling: 300 watts (RMS method)
Continued on Next Page
25
OUT
OF
SB-J-WRUD/10TW1 INSTR_SKU# 011387
INCLUDED HARDWARE
Continued on Next Page
Page 2 • JL Audio, Inc., 2019
SB-J-WRUD/10TW1 INSTR_SKU# 011387
BOM ID Qty SKU Description
1 1 153544 3/8 - 16 x 1” Hex Button Head Cap Screw Black
2 3 153548 3/8” M10 Serrated Spring Washer Black
3 5 153549 3/8” Flat Washer Black
4 1 150729 Front Bracket
5 2 150731 Rear Bracket
6 2 153550 3/8” Nylon Washer Black
7 2 153634 M8 x 30 mm 1.25 Flange Head Bolt Black
8 2 153633 M8 x 45 mm 1.25 Flange Head Bolt Black
9 2 153546 M8 1.25 mm Pitch Hex Flange Lock Nut
10 2 153547 3/8 - 16 x 1” Hex Head Bolt Black
1
2
3
4
5
6
3
7
8
9
3
2
10
POWER RECOMMENDATION
JL Audio recommends high quality ampliers such as the JL Audio XD300/1v2. The diagram below shows the recommended crossover settings for the XD300/1v2 For a detailed description of the
amplier settings, consult the owner’s manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.
CONNECTIONS
Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox®. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your
Stealthbox® amplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for
both channels of the amplier. JL Audio recommends using 12AWG speaker wire for subwoofers such as our XC-BCS12-25.
Continued on Next Page
Page 3 • JL Audio, Inc., 2019
SB-J-WRUD/10TW1 INSTR_SKU# 011387
Page 4 • JL Audio, Inc., 2019 Continued on Next Page
STEP 8
Connect speaker cable to the terminal cup on
the Stealthbox®, and place the enclosure into
position between the Front and Rear Brackets.
Route the speaker cable as necessary.
STEP 7
Align both Rear Brackets perpendicular to the
rail, as shown.
STEP 6
Pull the carpet down from the side of the
vehicle. Slide a Rear Bracket over the Flange
Head Bolt, under the rail, as shown. Secure
with an M8 1.25 Hex Flange Lock Nut, and hand
tighten. Repeat for the second hole.
STEP 5
Slide a 3/8 “ Flat Washer and a 3/8” Nylon
Washer over an M8 x 30 mm 1.25 Flange Head
Bolt (substitute an M8 x 45 mm 1.25 Flange
Head Bolt for vehicles with hard top), and
thread the assembly through one of the holes
indicated in the previous step. Repeat for the
second hole.
STEP 4
Locate the two indicated holes at the top of
the side rail.
STEP 3
Slide the Front Bracket over the factory stud,
followed by the seat belt bracket and nut, as
shown. Hand tighten.
STEP 2
Fold the rear seat down, remove the nut at
the base of the seat belt bracket, and slide the
bracket off of the stud.
STEP 1
Empty the cargo area of the vehicle.
SB-J-WRUD/10TW1 INSTR_SKU# 011387
Page 5 • JL Audio, Inc., 2019
MID/HIGH FREQUENCY DRIVER FITMENT
A variety of JL Audio coaxial and component systems will t in the factory speaker locations of you vehicle.
Front Speaker Size / Location: 6-1/2”- Front Doors
Fits JL Audio Models: C1-650, C1-650x, C2-650, C2-650x,
C3-650, C5-650, & C5-650x
Rear Speaker Size / Location: 6-1/2”- Roll Bar
Fits JL Audio Models: TC1-650, C1-650x, C2-650, C2-650x,
C3-650, C5-650, & C5-650x
All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, and “Stealthbox” and the Stealthbox logo are registered trademarks of JL Audio, Inc. “Ahead of the
Curve”, its respective logo, and“How we play” are trademarks of JL Audio, Inc.
Printed in USA • ©2019 JL Audio, Inc. • For more detailed information please visit us online at www.jlaudio.com.
(954) 443-1100
www.jlaudio.com
JLA-SKU# 011387 • ver. 04.11.2019 • 10369 NORTH COMMERCE PARKWAY • MIRAMAR, FLORIDA • 33025 • USA
CONGRATULATIONS!
You have completed the installation for this model! Enjoy your new Stealthbox®!
How we play.™
SB-J-WRUD/10TW1 INSTR_SKU# 011387
STEP 12
Fold the rear seat back up.
ST E P 11
With the enclosure aligned, fully tighten the
3/8 - 16 x 1” Button Head Bolt and the factory
seat belt nut. Then fully tighten both of the
3/8 - 16 x 1” Hex Head Bolts and M8 1.25 Hex
Flange Lock Nuts.
STEP 10
Align the threaded inserts on the back of the
enclosure with the holes in the Rear Brackets.
Slide a 3/8” Serrated Spring Washer and a 3/8
Flat Washer over a 3/8 - 16 x 1” Hex Head Bolt,
thread the assembly through the Rear Bracket
and into the threaded insert, and hand tighten.
Repeat for the second bracket.
STEP 9
Align the threaded insert on the front of the
enclosure with the hole in the Front Bracket.
Slide a 3/8” Serrated Spring Washer and a 3/8”
Flat Washer over a 3/8 - 16 x 1” Button Head
Bolt, thread the assembly through the Front
Bracket and into the threaded insert, and hand
tighten.
Dieses Handbuch passt für folgende Modelle
3
Andere JL Audio Subwoofer Handbücher
JL Audio
JL Audio Stealthbox SB-GM-TAHOCNSL/10W1v2 Bedienungsanleitung
JL Audio
JL Audio 12W6v3-D4 Bedienungsanleitung
JL Audio
JL Audio Stealthbox SB-F-F1502/10W3v3 Bedienungsanleitung
JL Audio
JL Audio Stealthbox SB-J-UNLTD4DR/13TW5-3 Bedienungsanleitung
JL Audio
JL Audio Stealthbox SB-N-FRNTCC/10W1v2 Bedienungsanleitung
JL Audio
JL Audio Stealthbox SB-T-TACDC/10W1v3 Bedienungsanleitung
JL Audio
JL Audio Fathom IWS Bedienungsanleitung
JL Audio
JL Audio 13TW5-3 Bedienungsanleitung
JL Audio
JL Audio gotham v2 Bedienungsanleitung
JL Audio
JL Audio 10W1v2-4 Bedienungsanleitung
JL Audio
JL Audio Fathom IWSv2-SYS-113 Bedienungsanleitung
JL Audio
JL Audio 10W3v3-2 Bedienungsanleitung
JL Audio
JL Audio Stealthbox SB-F-TRKCTR3/10W3 Bedienungsanleitung
JL Audio
JL Audio 15W4-D2 Bedienungsanleitung
JL Audio
JL Audio 12W6v3-D4 Bedienungsanleitung
JL Audio
JL Audio 10WX Bedienungsanleitung
JL Audio
JL Audio Stealthbox SB-SC-TC/10W3v3 Bedienungsanleitung
JL Audio
JL Audio 300/2 Bedienungsanleitung
JL Audio
JL Audio 15W5 Speci?cations Bedienungsanleitung
JL Audio
JL Audio Stealthbox SB-J-GCHER3/10W1v2 Bedienungsanleitung
