John Lewis Ashton Bunk Bed Bed Bedienungsanleitung

Thank you for purchasing this Ashton Bunk Bed. Please read the instructions carefully

before use to ensure safe and satisfactory operation of this product.

Pre - assembly Preperations

Please ensure that all instructions are read in full before attempting to assemble this product.

Necessary Tools

Please check the pack contents before attempting to assemble this product. A full

checklist of components is given in this leaflet. If any components are missing,

please contact the John Lewis helpline.

This product is HEAVY, it should be assembled as near to the point of use as

possible. TAKE CARE WHEN LIFTING to avoid personal injury (or) damage to the

product.

This product takes approximately 60 MINUITES to assemble with 2 PEOPLE.

The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM

YOUNG CHILDREN.

If you require any additional information or have any issues with this product please

call the John Lewis helpline on 01244 689949 or email [email protected]

John Lewis Stock Code: 803/60806,

803/60506.

Bolt M6x 100MM

Bolt M6x 40MM

Bolt M6 x 30MM

Page 2 of 8

Please Note: One of the bottom Side Rails (10) and one of the Top Side Rails (8) have additional

pre-drilled holes for the Ladder to bed attached meaning the Ladders can be placed on either end of

the bed so you need to decide the positioning before starting to assemble the bed.

Step 1

Insert Barrel Nut (B) into the Side Rail Bottom Front (10) and Side Rail Bottom Back (11). Attach the

Headboard Bottom (2) using Bolt M6 x 100mm (D) and tighten using Allen Key M4 (A). Repeat this

process at each end of the bed as shown in the diagram below.

Step 2

Starting at one of the bed, secure the first fitted slat into place using Screw (C). Next, secure the fitted

slat to the other end and secure using Screw (C) ensuring that there are no no gaps between the slats

and the Headboards. Finally secure the rest of the slats into place using Screw (C) as shown in the diagram

below using a Phillips Head Screwdriver.

Please Note: The slats at each end have been cut to allow them to

sit flush with NO GAPS between the headboard and slats.

Step 3

Insert Barrel Nut (B) into the Side Rail Top Front (8) and Side Top Back (9). Attach To the 2 Headboard

Top (1) using Bolt M6 x 100mm (D) and tighten using a Phillips Head Screwdriver as shown in

the diagram below. Repeat this process at each end of the bed as shown below.

Step 4

Starting at one end of the bed, secure the rst tted slat into place using Screw (C). Next secure the tted slat

to the other ebd using Screw (C) ensuring that there are no gaps between the slats and headboard. Finally secure

the rest of the slats into place using Screw (C) and a Philips Head Screwdriver as show in the diagram below.

Please Note: This is the top half of the bunk bed

Please Note: The slats at each end have been cut to allow them to

sit flush with NO GAPS between the headboard and slats.

Step 5

To join the upper bed to the bottom bed insert a Steel Pin (H) into the top four corner posts of the

bottom bed, carefully lift upper bed structure and gently lower onto the Steel Pin (H) as shown in

the diagram below.

Step 6

Attach Ladder Horizontal (7) to the Ladder Long (5) using bolt M6 x 40mm (E) and tighten

using Allen Key M4 (A). Repeat this step to attach the Ladder Short (6) to the Ladder Horizontal (7).

Please Note: The grooved lines indicate the point in which the mattress shoud not exceed. The maximum

height of the mattress for this bunk is 19cm. Recommended size is: L: 190cm x W: 90cm x H: 19cm (max).

Please Note: The ladders

can be placed either side

of the bunk, choose which

side you want the ladders

before attaching the Side

Rail.

Step 7

Insert Dowel M8 x 30mm (G) into the bottom of

the Short Guard Rail (3) and Long Guard Rail (4).

Then attach the Rails (3) and (4) to Side Rail Top

Back (8) and Short Guard Rail (3) using the holes

for the Dowels as a guide.

Step 8

Secure the Long Guard Rail (4) using bolt M6

x 100mm (D) to both Headboard Tops (1) and

tighten using Allen Key M4 (A). Then secure the

Short Guard Rail (3) to Headboard Top (1) using

bolt M6 x 100mm (D) to one side only.

Step 9

Attach assembled Ladder Unit to the Short Guard Rail (3), Side Rail Top Front (8) and Side Rail Bottom

Front (10). Secure the Ladder Unit using bolt M6 x 30mm (F) and tighten using Allen Key M4 (A) as

shown in the diagram below.

Please ensure all fittings are securely tightened before use.

WARNING: Children can become trapped between the bed and the wall. To avoid risk of serious injury

the distance between the wall and the top safety barrier should be less than 75mm or more than 230mm.

Wood Furniture

Wood displays different grain patterns depending on which way they are cut - for example, ‘the medullary ray’

which can appear on oak furniture as a mark of good quality timber - these are just characteristics of the natural

beauty of the wood. Some furniture is also deliberatley aged and rustic.

Wood veneers also allow distintive patterns to be created on flat surfaces, such as table tops and drawer fronts

by the way the slivers are arranged.

All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade from

items that have been prieviously purchased.

How to care for your wood furniture

Furniture with a hard laquer, wax polish or painted surface should be dusted with a dry cloth.

Waxed furniture will need to be given a coat of beeswax a couple of times a year to help maintain its luster.

Spray polishes are best avoided as they contain sillicones which may spoil the furniture by building up over

time.

Our furniture will endure most temperatures in teh home but it is best to avoid placing furniture next to heat

sources such as radiators or fires. be particulary careful with solid wood as the lack of humidity caused by central

heating can cause damage such as warping.

Never drag furniture when moving it, always lift it.

Periodically check all fixings to ensure none have come loose and re-tighten where necessary.

Please take care when handling or moving the furniture as careless handling may cause damage or injury.

Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competant adult. No

liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture. During

assembly children should be kept away from the product due to possible risk of injury. Do not use this item if

any components are missing or damaged.

It is recommended that before moving heavy objests to a new location they are completly dis-assembled to

avoid personal injury or damage to teh furniture. Please be careful to retain all fittings when doing this.

This product is suitable for children aged 3 - 12 years.

The maximum weight or load for this product is 70kg.

This product complies with BS EN 747:2007 and Entrapment Hazard Safety Regulations 1987.

If you require any additional information or have any issues with this product please call the John Lewis

helpline on 01244 689949 or email [email protected]

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere John Lewis Inneneinrichtung Handbücher

John Lewis

John Lewis Grayson 862 26201 Bedienungsanleitung

John Lewis

John Lewis Jamie Bed 803/43701 Bedienungsanleitung

John Lewis

John Lewis Aldgate 816/82501 Bedienungsanleitung

John Lewis

John Lewis 803/50402 Bedienungsanleitung

John Lewis

John Lewis Mary Series Bedienungsanleitung

John Lewis

John Lewis Apollo 803/41301 Bedienungsanleitung

John Lewis

John Lewis Emily Storage Bed Bedienungsanleitung

John Lewis

John Lewis Daisy 803/41404 Bedienungsanleitung

John Lewis

John Lewis ZigZag Bedienungsanleitung

John Lewis

John Lewis Giorgio Bed Bedienungsanleitung

John Lewis

John Lewis Marlow 82002403 Bedienungsanleitung

John Lewis

John Lewis Duhrer 836 03704 Bedienungsanleitung

John Lewis

John Lewis 413 92431 Bedienungsanleitung

John Lewis

John Lewis Rachel chest of drawers Bedienungsanleitung

John Lewis

John Lewis 57040107 Bedienungsanleitung

John Lewis

John Lewis Chunky Weave 820 88903 Bedienungsanleitung

John Lewis

John Lewis CUBE 816/25504 Bedienungsanleitung

John Lewis

John Lewis REIGN CRYSTAL PENDANT Bedienungsanleitung

John Lewis

John Lewis Dara 803 18203 Bedienungsanleitung

John Lewis

John Lewis Skye Ottoman Bedienungsanleitung

John Lewis

John Lewis Salsa 82089613 Bedienungsanleitung

John Lewis

John Lewis LUX 2 TIER TOWEL STAND Bedienungsanleitung

John Lewis

John Lewis 803/15701 Bedienungsanleitung

John Lewis

John Lewis ANYDAY 820 06610 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung