Johnson Controls Tyco PowerSeries Pro HS2TCHPRO Bedienungsanleitung

HS2TCHPRO/HS2TCHPROBLK

Installation Instructions

Warning: Please refer to the System Installation Manual for information on limitations regarding product use and

function and information on the limitations as to liability of the manufacturer. These instructions shall be used in con-

junction with the system Installation Manual of the Control Panel with which this equipment is intended to be used.

29010964R001

Contents

Safety Instructions 4

Installation Instructions 5

Specifications 5

Unpacking 5

Mounting 6

Wiring 7

Basic Setup 8

Setting the Keypad Language 8

Enrolling the Keypad 8

Keypad Display Symbols 9

Proximity (Prox) Tags Support 9

Assign Proximity Tags 9

Delete Proximity Tags 9

Function Key Assignment 9

Available Function Key Options 10

Programming Labels 10

Optional Settings 11

Enable/Disable Fire, Medical, Panic Buttons 11

Extra Power Option 11

Change the Background Image 11

Dark Text Enable/Disable 11

Performing a firmware upgrade 11

Keypad Programming 11

[000] Keypad Partition Assignment 12

[011] Keypad Input/Output Programming 12

[012] Local PGM Output Pulse Activation Time 12

[021] First Keypad Options 12

[022] Second Keypad Options 12

[023] Third Keypad Options 13

[030] Download LCD Messages 13

[031] Download LCD Message Duration 13

[041] Indoor Temperature Zone Assignment 13

[042] Outdoor Temperature Zone Assignment 13

[101] - [348] Door Chime for Zones 1 - 248 13

Valid Entries 13

[991] Reset Keypad Programming to Factory Defaults 14

- 2 -

- 3 -

Approvals 14

FCC Compliance Statement 14

Industry Canada Compliance Statement 14

Simplified Declaration of Conformity 14

EN50131-1 Grade 3/Class II 14

Limited Warranty 15

SOFTWARE PRODUCT LICENSE 16

Safety Instructions

Read the safety information before you install the equipment.

Important: This equipment must be installed by a skilled person only. A skilled person is an installer with appropriate

technical training. The installer must be aware of potential hazards during installation and measures available to min-

imize risks to the installer and other people.

lBefore you install this equipment, disconnect all power sources (for example mains, battery, and telephone

line) connected to the alarm panel.

lInstall the equipment indoors in a non-hazardous environment where the following conditions are met:

lPollution degree - Maximum 2

lOver voltages - Category II

lInternal wiring must be routed to prevent strain on wire and terminal connections, loose terminal connections,

and damage to conductor insulation.

lInstruct the user that there are no user serviceable parts in this equipment. All equipment must be serviced

by a skilled person.

- 4 -

Installation Instructions

- 5 -

Installation Instructions

The HS2TCHPRO/HS2TCHPROBLK keypad can be used on security systems with up to 248 zones. These keypads are

compatible with the PowerSeries Pro panel models HS3128, HS3032, HS3248.

Specifications

lTemperature range: UL/ULC: 0°C to +49°C (32°F to 120°F); EN: -10°C to +55°C (14°F to 131°F)

lWeight: 405 g

lHumidity (MAX): 93% R.H. non-condensing

lPlastic enclosure protection degree: IP30, IK04 (touchscreen excluded)

lVoltage rating: 11.3 VDC to 12.5 VDC nominal

lCorbus low voltage: 9 VDC

lConnects to control panel via 4-wire Corbus

lCorbus distance: 101 m (332 ft. max.). Corbus distance in Extra Power mode: 54 m (177 ft)

lUp to 32 keypads per system

lHS2TCHPRO/HS2TCHPROBLK current draw (at 12 VDC): 100 mA standby (screen off); 160 mA activated or alarm

(Regular. power mode); 230 mA activated or alarm (Extra Power mode).

Note: This does not include 50 mA (max) using PGM output.

lWall mount tamper

lFour programmable function keys

lReady (Green LED), Armed (Red LED), Trouble (Yellow LED), AC (Green LED), HOME (White LED)

lKeypad size: 191 mm x 126 mm x 20.35 mm

lDisplay area size: 155 mm x 86 mm

lSD card slot: holds any standard Secure Digital (SD) card* (32 mm x 24 mm x 2.1 mm). *If necessary, the SD card

can be formatted to file system FAT16 or 32 using a PC. The maximum size SD card supported is 32 GB.

lWiring: standard four-wire connection

lView angle: horizontal viewing angle: 70° left, 70° right

lVertical view angle: 70° top, 50° bottom

lBrightness: 280 cd/m2

Note: On the HS3248 panel, the maximum number of partitions is 32 and the maximum number of keypads is 32.

For more information on the system configurations, refer to the Reference Manual.

Unpacking

The keypad package includes the following parts:

lOne keypad

lFive mounting screws and five anchors for wall-mounting

lOne tamper switch (required for UL commercial burglary listed installations)

lInstallation instructions and User manual

Mounting

Mount the keypad near designated points of entry and exit. Once a dry and secure location is selected, do the fol-

lowing:

1. If there is an SD card in the keypad, remove the SD card before opening the touchscreen. See Figure 1.

Warning: Do not disassemble the touchscreen without removing the SD card first.

2. Remove screw at the bottom of the keypad.

3. Insert screwdriver into slots and pry up to remove.

Figure 1 - Removing the Backplate

4. Secure keypad backplate to the wall using mounting holes, see Figure 2. Use all 4 screws provided unless mount-

ing on a single gang box. Use the plastic anchors if the unit is to be mounted on drywall. If using the keypad

tamper, secure the tamper plate to the wall with a screw.

- 6 -

Wiring

- 7 -

Figure 2 - Mounting the Backplate

Callout Description

1 Mounting holes

2 Wiring slot

3 Hole for tamper screw

Note: For ULC fire installations, the keypad must be mounted on top of an electrical box and used with conduit.

5. Run wire through wiring slot. Connect Corbus wiring to the keypad. See the Wiring section.

6. Place keypad into backplate, ensuring that the wire is pushed back into the wall as much as possible. Route the

wire inside the keypad ensuring high components are avoided. Snap the front assembly closed, ensuring it fits

flush with the backplate.

If any tension is found between the front keypad assembly and wiring, open the keypad, re-route the wire and close

again. Repeat these steps until the keypad is closed properly.

Wiring

1. Before wiring the unit, ensure that all power (AC transformer, telecommunications network, and battery) is dis-

connected from the control panel.

2. Connect the four corbus wires from the control panel (green, yellow, black and red) to the keypad terminals.

3. If the P/Z terminal is programmed as an input, a device such as a door contact may be connected to the keypad.

This eliminates the need to run wires back to the control panel for the device. To connect the zone, run one wire

from the device to the ‘P/Z’ terminal and the other wire from the device to the B (black) terminal. For powered

devices, run the red wire to the R (positive) terminal and the black wire to the B (negative) terminal.

4. If the ‘P/Z’ terminal is programmed as an output, a small relay (such as DSC model RM-1 or RM-2), buzzer or other

DC operated device may be connected between the positive supply voltage and the ‘P/Z’ terminal (max.load is

50mA).

Note: P/Z terminal is not to be used for fire applications but can be used for low risk ULC commercial burglary

applications.

Figure 3 - Wiring

HS2TCHPRO/

HS2TCHPROBLK

RED R

BLK B

YEL Y

GRN G

To zone or P/Z

PGM output

____

Basic Setup

This section describes how to configure the keypad, including enrollment, proximity tag setup, function key assign-

ment and label programming.

Setting the Keypad Language

Enter [000][000] then the two-digit language number.

Languages

01 = English (default) 08 = Czech 15 = Greek

02 - Spanish 09 = Finnish 16 = Turkish

03 - Portuguese 10 = German 18 = Croatian

04 - French 11 = Swedish 19 = Hungarian

05 = Italian 12 = Norwegian 20 = Romanian

06 = Dutch 13 - Danish 21 = Russian

07 = Polish 14 = Hebrew

Enrolling the Keypad

Keypads can be enrolled automatically or manually. In either case, the serial number of the device is used as an iden-

tifier.

Note: If no keypad is enrolled on the system, the touchscreen displays the following message when powered up:

Press the Enroll button. Once the touchscreen is enrolled, use it to enroll other keypads and modules. The following

enrollment methods are available:

[902][000] Auto Enroll

- 8 -

Basic Setup

- 9 -

When this mode is selected, the total number of keypads currently enrolled is displayed.

1. Enter [902][000] to begin auto-enrollment of new keypads. Keypads are assigned to the next available slot.

[902][001] Manual Enroll

1. Enter [902][001] or use the [<][>] keys and press [*].

2. When prompted, enter the serial number of the keypad found on the back of the keypad.

3. Once enrolled, the keypad model, serial number and slot assignment are displayed. The slot assignment can be

changed using the [<][>] keys.

4. To cancel the enrollment of a module, press [#].

[902][101] Unenroll Keypads

1. Enter [902][101] or use the [<][>] keys and press [*].

2. Use the [<][>] keys to scroll to the specific keypad to delete.

3. Press [*] to select the keypad and, when prompted, press [*] again to delete it.

Keypad Display Symbols

Ready Light (green) – If the Ready light is on, the system is ready for arming.

Armed Light (red) – If the Armed light is on, the system has been armed successfully.

System Trouble – Indicates that a system trouble has been detected.

AC – Indicates that AC is present at the main panel.

Proximity (Prox) Tags Support

A Prox tag can be used in place of an access code to perform functions on the system. Present the tag to the tag

reader .

Assign Proximity Tags

Using the keypad:

1. Press [*][5] Master/Supervisor Code].

2. Enter a 2-digit user code.

3. Press 2.

4. Pass the enrolled tag near the tag reader.

Delete Proximity Tags

To delete a proximity tag:

1. Select Options, Access Codes [enter Master code].

2. Select a user to delete.

3. Select Prox Tag Prog then delete.

Function Key Assignment

The HS2TCHPRO/HS2TCHPROBLK has 7 buttons on the Home screen, four of them programmable by the installer.

Function key 2 must always be set to "Away Armed."

To program function keys 1,3,4,5:

1. On the keypad, press [*][8][Installer Code].

2. Enter [861]-[892] to program keypads 1-32 respectively.

3. Enter [001-[005] for function keys 1-5 or use the [<][>] keys and press [*].

4. Enter a 2-digit number to assign a function key operation - [00]-[68].

See Available Function Key Options below.

5. Repeat from step 3 until function keys 1, 3, 4, 5 are programmed.

Function Key Function Option

1 Stay Arm 03

2 Away Arm (Do not change) 04

3 Alarm Memory 40

4 Trouble Display 39

5 User Functions 35

To program function key 6:

1. Press Options, Installer Menu [Installer Code], Keypad Programming then Home Functions.

2. The default for the function key 6 Home Page display is Keypad Mode. To display the Photo button on the

Home page, press Photos.

Available Function Key Options

The following table describes the available function key options:

[00] Null [02] Instant Stay Arm [03] Stay Arm

[04] Away Arm [05] No-entry Arm [06] Chime ON/OFF

[07] System Test [09] Night Arm [12] Global Stay Arm

[13] Global Away Arm [14] Global Disarming [16] Quick Exit

[17] Arm Interior [21] Command Output 1 [22] Command Output 2

[23] Command Output 3 [24] Command Output 4 [29] Bypass Group Recall

[31] Local PGM Activate [32] Bypass Mode [33] Bypass Recall

[34] User Programming [35] User Functions [37] Time/ Date Program

[39] Trouble Display [40] Alarm Memory [61] - [92] Partition Select 1 - 32

Programming Labels

1. From the HS2TCHPRO/HS2TCHPROBLK keypad, press Options, press Installer Menu [Installer Code], then press

Label Programming.

2. From the Label screen, select the item you want to label (e.g., zones, partitions, etc.).

- 10 -

Andere Handbücher für Tyco PowerSeries Pro HS2TCHPRO

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Johnson Controls Bedienfeld Handbücher

Johnson Controls

Johnson Controls Frick QUANTUM HD VILTER Bedienungsanleitung

Johnson Controls

Johnson Controls IFC-200 Bedienungsanleitung

Johnson Controls

Johnson Controls Frick QUANTUM Series Leitfaden

Johnson Controls

Johnson Controls Frick QUANTUM LX Bedienungsanleitung

Johnson Controls

Johnson Controls IFC-3030 Bedienungsanleitung

Johnson Controls

Johnson Controls YORK OPTIVIEW CONTROL CENTER Bedienungsanleitung

Johnson Controls

Johnson Controls FRICK QUANTUM LX AcuAir Gebrauchs- und Pflegehandbuch

Johnson Controls

Johnson Controls FC-2000 Bedienungsanleitung

Johnson Controls

Johnson Controls Frick QUANTUM LX Leitfaden

Johnson Controls

Johnson Controls IQ4 NS Bedienungsanleitung

Johnson Controls

Johnson Controls S1-TTSCC01 Leitfaden

Johnson Controls

Johnson Controls S1-TTSCC01 Kurzanleitung

Johnson Controls

Johnson Controls CIW01 Bedienungsanleitung

Johnson Controls

Johnson Controls Bentel Security tyco ABSOLUTA Plus Benutzerhandbuch

Johnson Controls

Johnson Controls FRICK QUANTUM HD Leitfaden

Johnson Controls

Johnson Controls IFC-3030 Bedienungsanleitung

Johnson Controls

Johnson Controls FRICK QUANTUM LX AcuAir Leitfaden

Johnson Controls

Johnson Controls FRICK QUANTUM LX/HD Bedienungsanleitung

Johnson Controls

Johnson Controls CIW01 Bedienungsanleitung

Johnson Controls

Johnson Controls IQ Panel Bedienungsanleitung

Johnson Controls

Johnson Controls IFC-200 Referenzhandbuch

Johnson Controls

Johnson Controls Qolsys IQPK048 Bedienungsanleitung

Johnson Controls

Johnson Controls IFC-3030 Betriebsanleitung

Johnson Controls

Johnson Controls Bentel Security Absoluta 630 4.10 Benutzerhandbuch

Beliebte Bedienfeld Handbücher anderer Marken

RDZ

RDZ PC-HRX Bedienungsanleitung

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Technisches Handbuch

Efka

Efka Variocontrol V810 Bedienungsanleitung

Cebora

Cebora 208-10 Bedienungsanleitung

AMX

AMX AutoPatch CP-15 Bedienungsanleitung

Satel

Satel CA-6 KLED-S Bedienungsanleitung

Evolution

Evolution IQ plus 800 Bedienungsanleitung

Fagor

Fagor 8040 TCO CNC Bedienungsanleitung

Trane

Trane ComfortLink II XL950 Control Bedienungsanleitung

AKO

AKO PROCool AKO-17635-2 Bedienungsanleitung

ABB

ABB 6136/30M-101 Bedienungsanleitung

Telikou

Telikou BK-603 Belt Pack Bedienungsanleitung

Mapei

Mapei Mapeheat Thermo Touch Bedienungsanleitung

Bosch

Bosch D9412GV4 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Bedienungsanleitung

Sminn

Sminn BOX L VF1L EI Bedienungsanleitung

Balboa

Balboa TP600 Bedienungsanleitung

Nice

Nice HSCU1 Technische Daten