Johnson Pump TopClean AS Bedienungsanleitung

IM-AS/02.00 GB-JPAB (0412)

Instruction Manual

TopClean AS

Hygienic, Self-priming

Liquid Ring Pumps

CE – Declaration of conformity

Manufacturer

Johnson Pump

Box 1436

SE- 701 14 Örebro

Sweden

We declare under our sole responsibility that the product:

Pump Series AS

CE declaration of conformity (Ann.II.A, 98/37/EEC)

to wich this declaration refers, is conform to safety requirements according

to 98/37/EEC norms and amendments

Manufacturer declaration (Ann. II.B, 98/37/EEC)

cannot be operated before the machine in which is assembled, will be decla-

red in conformity with safety requirements according to 98/37/EEC norms

and amendments.

Örebro, Sweden, 01/03/2007

Stefan Ring

Manager Quality & Environment

IM-AS/02.00 GB (0412)

Index

1.0 Introduction ...................................................................................................... 3

2.0 Symbols ...................................................................................................... 3

3.0 Safety warnings ................................................................................................ 3

4.0 Transportation, receipt and transferring of goods ....................................... 4

4.1 Transportation .............................................................................................................. 4

4.2 Receipt .......................................................................................................................... 4

4.3 Transferring .................................................................................................................. 4

5.0 Description ...................................................................................................... 5

5.1 Sound pressure level.................................................................................................... 5

6.0 Non-permitted uses.......................................................................................... 6

7.0 Installation ...................................................................................................... 6

7.1 Suction and inflow conditions .................................................................................... 6

7.2 Piping ........................................................................................................................... 6

7.3 Electrical connection ................................................................................................... 7

8.0 Operation ...................................................................................................... 7

8.1 Preliminary operations and starting .......................................................................... 7

8.2 Operating checks ......................................................................................................... 8

8.3 Extended stop .............................................................................................................. 8

8.4 Cleaning the pump ...................................................................................................... 8

9.0 Spare parts ...................................................................................................... 8

10.0 Seals ................................................................................................. 9

11.0 Disassembly and Assembly AS-series ......................................................... 10

11.1 General instructions .................................................................................................. 10

11.2 O-rings and lip seals .............................................................................................. 10

11.3 Shutdown .............................................................................................. 10

11.4 Disassembly .............................................................................................. 11

11.4.1 Removal of pump casing and impeller – AS 40, 50, 60, 65 and 80 .......... 11

11.4.2 Removal of pump casing and impeller – AS 42 and AS 52 ...................... 11

11.4.3 Seal disassembly ............................................................................................ 12

11.4.3.1 T execution ......................................................................... 12

11.4.3.2 V execution ......................................................................... 12

11.4.3.3 Q execution ......................................................................... 12

11.4.4 Bearing removal ............................................................................................ 13

11.5 Assembly .............................................................................................. 13

11.5.1 Clearances .............................................................................................. 13

11.5.2 Pump assembly AS 40, 50, 60, 65................................................................. 14

11.5.3 Seal assembly .............................................................................................. 14

2IM-AS/02.00 GB (0412)

11.5.3.1 T execution .......................................................................... 14

11.5.3.2 V execution .......................................................................... 14

11.5.3.3 Q execution .......................................................................... 15

11.5.4 Assembly of pump casing and impeller assembly ........................................

– AS 40, AS 50, AS 60, AS 65 and AS 80 ................................................... 15

11.5.5 Pump cover and Impeller assembly – AS 42 and AS 52 ........................... 16

12.0 Spare parts lists and sectional drawings ...................................................... 17

12.1 Spare part list AS 40, 50, 60-65, 80 .......................................................................... 17

12.2 AS 40 – Execution T, Q, V........................................................................................ 18

12.3 AS 50 – Execution T, Q, V........................................................................................ 19

12.4 AS 60-65 – Execution T, Q, V .................................................................................. 20

12.5 AS 80 – Execution T, Q, V........................................................................................ 21

12.6 Spare part list AS 42, 52 ............................................................................................ 22

12.7 AS 42 – Execution T, Q, V........................................................................................ 23

12.8 AS 52 – Execution T, Q, V........................................................................................ 24

13.0 Dimensions and weights .............................................................................. 25

13.1 AS 40-50-60-65-80 with shroud 1450 rpm ............................................................... 25

13.2 AS 40-50-60-65-80 without shroud 1450 rpm ......................................................... 25

13.3 AS 42-52 with shroud 1450 rpm ............................................................................... 26

13.4 AS 42-52 with shroud 1450 rpm ............................................................................... 26

14.0 Trouble shooting chart .............................................................................. 27

15.0 Disposal of the pump .............................................................................. 28

IM-AS/02.00 GB (0412)

TopClean

Item

No. r.p.m.

kW Volt Hz

Nastagatan 19, Örebro, Sweden · Tel +46 (0)19 21 83 00

Pump type

Serial No.

Name plate

Warning: Pay great attention to the text parts indicated by this symbol.

Danger:The non-observance of instructions can cause serious damage

to persons and/or objects.

Danger:Only skilled personnel is allowed to carry out operations

concerning the electric parts.

1.0 Introduction

•Read the instructions carefully and keep them for future consultation.

•Johnson Pump reserves the right to make any changes to the documentation it

deems necessary without being obliged to update publications that have already

been issued.

•When requesting information, spare parts or assistance, always specify the pump

type and serial number in order to ensure fast and efficient service: the complete

code is given on the plate and in the purchase documents.

2.0 Symbols

3.0 Safety warnings

When the pump is working the following occurs:

•Electric parts are in tension.

•Mechanical parts are moving.

•Pump body, pipelines and articulations are under internal pressure. Therefore do not

remove any protection or locking, do not loosen screws or clampings, as this can

cause serious damages to persons or objects. The clamp joining the pump casing and

the cover must be well tightened and it should not be easily unscrewed by hand. The

tightening of the clamp must be carried out by means of a key and not by hand.

•Non-observance of inspection and maintenance can cause damages to persons and

objects, especially when dangerous or toxic liquids are pumped.

•When pumping liquids at a temperature over 60°C, adequate protection and

warning signals are required.

•When you buy a pump with bare shaft, motor coupling operations have to be

carried out according to technical directions and law, providing adequate

rotections for joints, gear belts, etc.

•Operations on the electric parts have to be carried out by skilled personnel,

according to technical directions and law, on authorisation of the responsible

installer.

•Installation must ensure adequate ventilation, in order to cool the engine, as well as

enough space for maintenance operations.

4IM-AS/02.00 GB (0412)

Before carrying out any operation which requires to disassembly of the pump

(inspection, cleaning, seal replacement, etc.), the following preliminary operations have

to be carried out:

•Switch off engine tension and disinsert electric connection.

•Close valves on suction and outlet pipelines, in order to avoid the risk of inundation.

•Use adequate protection for hands and face, if the pump contains liquids which are

hazardous to health (for example acids, solvents, etc.).

•Consider whether the liquid which flows out of the pump when disassembling is

dangerous and arrange for adequate safety measures.

4.0 Transportation, receipt and transferring of

goods

4.1 Transportation

The packings of all AS pumps are defined when making the order. Unless prior arrangements

are given, goods will be packed only for transit conditions and not for long-term storage; in case

it should be necessary to store the pumps outside, you are requested to cover the pumps

appropriately in order to protect the electrical parts (motor) from rain, dust, humidity etc.

4.2 Receipt

Upon receipt of goods the integrity of the packaging must be verified in order to identify

possible damages to the content during transfer, and to claim immediately from the carrier.

Should any damage be ascertained, the following procedure must be observed:

•Collect the goods with receipt.

• Take the necessary pictures showing the damages.

•Notify the carrier of the suffered damages, by registered airmail – including the

pictures taken.

4.3 Transferring

Carry the packed pumps as close as possible to the place of installation by means of appropriate

lifting devices and unpack them. During this operation take care, as unsteady parts could fall

down.

The material used for packing (wood, paper, cellophane, etc.) should be properly disposed of,

according to the corresponding rules in force in receiver’ s country.

After unpacking the pump, use special lifting belts and move the pump-motor-set to the place

of installation; never use the eyebolts on the motor to move the pump, as the eyebolts are for

moving the motor only.

In versions complete with shroud,

take the shroud off before moving the

pump-motor-set, in order to avoid

damages.

IM-AS/02.00 GB (0412)

5.0 Description

The pumps of series AS are centrifugal side channel self-priming with star-shaped impeller; the

ports are located on the longitudinal axe with the suction located on the front of the pump

cover. All models have threaded connections for fittings according to DIN 11851 standard

(unless otherwise requested). The pump front cover is easy to open to improve cleaning and

inspection operations; all models are fitted with mechanical seals and the materials used for the

components of mechanical seal are chosen according to the liquid to be pumped.

Designed in close-coupled version, fitted with indepandant standard electric motors B5 shape,

IP 55 protection (unless otherwise requested).

These pumps are designed for applications where the liquid to be pumped :

•is not subject to pollution of any kind,

•is at a temperature between -30°C and +140°C,

•must under no circumstances come into contact with the outside environment,

•is chemically aggressive.

5.1 Sound pressure level

The sound pressure level of self-priming pumps is the following (see table):

The measurement has been made by means of a phon-meter placed at 1 m distance from the pump

and at a height of 1.6 m from the ground.

Preliminary condition is that the pump is fixed correctly; the above mentioned values do not take

into account external noise sources (e.g. valves, abrupt hydraulic deflections).

Pump type dB(A)

AS 40 < 80

AS 42 81-85

AS 50 81-85

AS 52 86-90

AS 60 86-90

AS 65 86-90

AS 80 86-90

6IM-AS/02.00 GB (0412)

Fig. 1

NO YES

6.0 Non-permitted uses

Do not use the pump with a suction pressure greater than the specified value (0.5 times

the discharge head generated by the pump).

The pump must always be used in an environment appropriate to the level of protection

of the motor. Always check this on the motor plate before installation.

The pump may not be used in environments which require a higher level of protection or

a higher specification motor or electrical parts.

Components complying with the safety standards for the environment in question must

be used.

7.0 Installation

7.1 Suction and inflow conditions

(NPSH = Net Positive Suction Head)

NPSH of system (available NPSH)

In order to ensure that pump operation is free from cavitation, it is essential to observe

the maximum permitted suction lift ha geo max or the minimum allowable head hc geo

min. NPSH of pump (required NPSH)

The centrifugal pumps can operate correctly only if vapour has not formed inside. For

this reason the static head at the reference point for the NPSH is the centre of the

impeller, that is the point of intersection of the pump shaft axis with the vertical plane

that passes through the external points of the blade inlet corners.

NPSHnec. is the value required by the pump, expressed in metres, obtained from the

performance curve. In practice 0.5 m should be added to this value as a safety margin.

7.2 Piping

In order to prevent the creation of harmful stresses, the suction and discharge pipes must

be connected to the pump ports without the use of force. These pipes must also be

supported independently avoiding causing stresses on the pump. The internal diameter

must be the same size as the pump connections. It must in any case not be smaller to

avoid head loss and/or poor performances. Always use elbows with large radius. If the

pipe diameter changes along the line, use reduction cones, choosing the ones that are

most suitable for avoiding the formation of air pockets (Fig. 1).

The suction pipe must be as short as possible and rise as it moves towards the pump if it

is sucking from a tank, if on the other hand the pump is below the level of the liquid, the

pipe should descend slightly. If the pump is used for transporting hot liquids, fit expan-

sion joints to compensate any expansion of the piping. The maximum velocity of the

liquid in the suction pipe must not be greater than 3 m/s. Velocities between 1 and 2 m/s

are recommended.

The suction pipe must be designed in such a way as to prevent air from entering the

pump. For this reason, when sucking from a tank located at a lower level, the pipe must

reach below the free surface of the liquid. Avoid creating obstacles which could increase

suction losses disrupting smooth fluid flow. Make sure that there are no restrictions,

IM-AS/02.00 GB (0412)

7.3 Electrical connection

Make the electrical connection only after the hydraulic connection has been completed; set up

the motor control system in conformity with the technical standards and regulations in force

(EN 60204-1): in particular a manual electric power switch must be installed with adequate

current switching capacity; devices for overcurrent and overload protection (e.g. fuses,

automatic switches, etc.) must also be fitted, plus, if necessary, a device to prevent accidental

restarting.

Check that the main frequency and voltage and the available power are suitable for the motor

installed. All the material used for the electrical connection (cables, cable clamps, switches and

shielding) must have a suitable level of protection for the environment in which it is installed.

Be sure to use cables of sufficient cross-section for the current shown on the motor plate so as

to prevent them from overheating. Before doing anything else, make the motor’s earth

connection, using the terminal on the motor and a cable of sufficient cross-section. The cables

may be connected to the terminal board using either a delta or star arrangement. Follow the

data given on the motor plate for the main voltage, as shown in the diagram in fig 2; ensure that

the terminals are clean and tight and not under stress.

When starting, the motor’s current absorption increases briefly to 5-6 times the nominal value.

If the mains supply is unable to sustain this increase in absorption, use a star-delta starter or

other kind of device (e.g. an autotransformer).

Johnson Pump will accept no responsibility for damage to property and/or injury to persons

caused by failure to comply with technical standards and regulations in force.

8.0 Operation

8.1 Preliminary operations and starting

When first starting, fill the pump with liquid so as to create the pressure drop required for

suction. When starting subsequently the quantity of liquid that remains in the pump will be

sufficient to ensure self-priming even if the pipe is empty. Make sure that the pump does not

become completely empty in the event of installation under a vacuum or to a siphon. If

necessary, fit a check valve.

•Check that the pump turns freely under hand pressure.

•Check that the clamp joining the pump casing and the cover is well tightened and that

it cannot be easily unscrewed by hand. The tightening of the clamp must be carried out

by means of a key and not by hand.

•Check that the pump turns in the market direction.

•Check that any gate valves installed on the suction and discharge pipelines are open.

•Start the pump and check the turns direction; before restarting it is extremely important to

Fig 2

Lower

voltage

Higher

voltage

8IM-AS/02.00 GB (0412)

•The pump must always work smoothly and without vibrations.

•Do not operate without liquid and in any case avoid prolonged operation with the

discharge gate valve closed.

•With series AS pumps never close discharge side completely.

•Mechanical seal: check that there is no leakage along the shaft.

8.3 Extended stop

When stopping the pump for a longer time, empty the pump completely and wash it

accurately in order to avoid the formation of scales and/or encrustations. When starting

the pump again, please follow the above mentioned instructions.

8.4 Cleaning the pump

The pump does not require any special washing procedures. The washing cycles

normally used for the plant in which it is installed are quite satisfactory. When using the

pump for liquids that tend to harden or crystallize, always make sure it is washed before

periods when the machine is to be taken out of operation. This will ensure durability of

the seal and of the pump itself.

It is the user’s responsibility to ensure that the washing liquids are compatible with the

process liquid and the pump.

9.0 Spare parts

Denomination Number of pumps

(Including reserve)

12345

Mechanical seal 1 2 3 4 4

Pump bearing 1 1 1 2 2

O-ring seal 2 3 5 6 7

O-ring seal nut 2 3 5 6 7

Recommended spare part for two years of operation according to the

number of pumps installed – vdma standard

Johnson Pump declines all responsibility for damage or injury resulting from the use of

non-original spare parts

8.2 Operating checks

• If the pump does not generate the required discharge head rapidly, facilitate

priming by stopping the pump and adding liquid.

• Check that the absorption of the motor does not exceed the value specified on the

plate.

Inhaltsverzeichnis

Andere Johnson Pump Wasserpumpe Handbücher

Johnson Pump

Johnson Pump SPXFLOW 500 GPH 12V Bedienungsanleitung

Johnson Pump

Johnson Pump F4B-19 Series Bedienungsanleitung

Johnson Pump

Johnson Pump SPX FLOW L750 LB Bedienungsanleitung

Johnson Pump

Johnson Pump Viking Power 32 Bedienungsanleitung

Johnson Pump

Johnson Pump WD 2.9 Bedienungsanleitung

Johnson Pump

Johnson Pump Viking Power 16 Bedienungsanleitung

Johnson Pump

Johnson Pump Bilge Mate Bedienungsanleitung

Johnson Pump

Johnson Pump AQUA JET WPS 3.4 Bedienungsanleitung

Johnson Pump

Johnson Pump SPXFLOW Macerator TA3P-10 Einrichtungshandbuch

Johnson Pump

Johnson Pump L450 Bedienungsanleitung

Johnson Pump

Johnson Pump SPXFLOW TopGear BLOC Series Bedienungsanleitung

Johnson Pump

Johnson Pump Top Wing Series Bedienungsanleitung

Johnson Pump

Johnson Pump AQUA JET WD 3.4 Bedienungsanleitung

Johnson Pump

Johnson Pump SPX FLOW WPS Series Bedienungsanleitung

Johnson Pump

Johnson Pump Aqua Jet WPS 2.9 Bedienungsanleitung

Johnson Pump

Johnson Pump SPX FLOW 500 GPH Bedienungsanleitung

Johnson Pump

Johnson Pump MDR Series Bedienungsanleitung

Johnson Pump

Johnson Pump SPX Flow CombiLine Series Bedienungsanleitung

Johnson Pump

Johnson Pump SPX FLOW F4B-11 12V DC Bedienungsanleitung

Johnson Pump

Johnson Pump SPXFLOW Aqua Void Cartridge Series Bedienungsanleitung

Johnson Pump

Johnson Pump SPX Bilge Mate Bedienungsanleitung

Johnson Pump

Johnson Pump F7B-5001 Bedienungsanleitung

Johnson Pump

Johnson Pump F4B-19 Series Bedienungsanleitung

Johnson Pump

Johnson Pump SPXFLOW F2P10-19 1/2" hose 12 V Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

moyno

moyno 2000 CC Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung