Johnson 40-6683 Bedienungsanleitung

Self-Leveling 3 Line or 3 Dot Laser

Model No. 40-6683

Instruction Manual

Congratulations on your choice of this Self-Leveling 3 Line or 3 Dot

Laser. We suggest you read this instruction manual thoroughly before

using the instrument. Save this instruction manual for future use.

This is a Class a laser tool and is manufactured to comply with

CFR 21, parts 1040 .10 and 1040 .11 as well as international safety

rule EC 285.

6222H_Manuals 10/2/12 8:54 AM Page 1

Table of Contents

1. Kit Contents

2. Features and Functions

3. Safety nstructions

4. Location/Content

of Warning Labels

5. Location of Parts/Components

6. Operating nstructions

7. Using the Product

8. Self-Check & Fine Calibration

9. Technical Specifications

10. Application Demonstrations

11. Care and Handling

12. Product Warranty

13. Warranty Registration

14. Accessories

1. Kit Contents

Description for Model 40-6683 Qty.

Self-Leveling 3 Line or 3 Dot Laser 1

Multi-Functional Magnetic Base 1

“AA” Alkaline Batteries 3

Tinted Glasses 1

Mounting Strap 1

Magnetic Target 1

nstruction Manual with Warranty Card 1

Hard-Shell Carrying Case 1

6222H_Manuals 10/2/12 8:54 AM Page 2

2. Features and Functions

• Able to project three lines with two cross-line beams,

consisting of two horizontal lines and one vertical line with a

plumb down laser dot.

• Product simultaneously projects three laser beams (front, up

and down).

• Magnetic dampening compensation system.

• Laser flashes/sounds audible alarm when beyond leveling

range.

• Manual mode feature allows unit to be tipped at extreme

angles without the audible alarm and laser flash being

triggered

• Multi-functional magnetic base is included to allow

hanging on wall, attach to metal, or connect to tripod

(5/8"-11).

• ncludes adjustable strap for attachment to pipe or conduit.

• Pendulum locking mechanism helps protect units inner

mechanisms.

6222H_Manuals 10/2/12 8:54 AM Page 3

3. Safety Instructions

Please read and understand all of the following instructions, prior

to using this tool. Failure to do so, may void the warranty.

DANGER!

Class a Laser Product

Max. Power Output: ≤5mW

Wavelength: 625-645nm

THIS TOOL EMITS LASER RADIATION.

DO NOT STARE INTO BEAM.

AVOID DIRECT EYE EX OSURE.

ATTENTION IMPORTANT

• Read all instructions prior to operating this laser tool. Do not remove any labels from tool.

• Do not stare directly at the laser beam.

• Do not project the laser beam directly into the eyes of others.

• Do not set up laser tool at eye level or operate the tool near a reflective surface as

the laser beam could be projected into your eyes or into the eyes of others.

• Do not place the laser tool in a manner that may cause someone to unintentionally

look into the laser beam. Serious eye injury may result.

• Do not operate the tool in explosive environments, i.e. in the presence of gases or

flammable liquids.

• Keep the laser tool out of the reach of children and other untrained persons.

• Do not attempt to view the laser beam through optical tools such as telescopes as

serious eye injury may result.

• Always turn the laser tool off when not in use or left unattended for a period of time.

• Remove the batteries when storing the tool for an extended time (more than 3 months)

to avoid damage to the tool should the batteries deteriorate.

• Do not attempt to repair or disassemble the laser tool. f unqualified persons attempt

to repair this tool, warranty will be void.

• Use only original Johnson®parts and accessories purchased from your Johnson®

authorized dealer. Use of non-Johnson®parts and accessories will void warranty.

6222H_Manuals 10/2/12 8:54 AM Page 4

4. Location/Content of Warning Labels

6222H_Manuals 10/2/12 8:54 AM Page 5

5. Location of art/Components

Keypad

Self-calibration

Apertures

(side & back)

Compensator

Lock and

On/Off Switch

Laser

Output

Windows

Battery Cover

1/4 -20 Thread

Magnets

Down

Laser/Dot

Output Window

Multi-Functional Magnetic Base

5/8 Screw Thread

1/4 -20 Thread

nstrument

Connecting Knob

Belt Mounting

Groove

Wall Mount

6222H_Manuals 10/2/12 8:54 AM Page 6

6. Operating Instructions

Alkaline Battery Installation

Note: Always check to be sure that the on/off switch is in the off

position before removing and replacing batteries.

1. As shown in figure, put 3 “AA” alkaline batteries into the battery

compartment noting the polarity as shown in the battery

compartment. Snap the battery cover shut. Turn the on/off

switch to on. f the power LED is flashing, the battery is low.

IM ORTANT: t is the responsibility of the user to verify the

calibration of the instrument before each use.

6222H_Manuals 10/2/12 8:54 AM Page 7

7. Using the Product

This base was specially designed for more extensive adaptability of

the laser. The base can be connected to a standard 5/8"-11 tripod.

The laser can be connected to a 1/4" – 20 tripod. With the use of the

base, the laser can be rotated, hung on a wall, attached to a metal

plate, or strapped to a column or pipe.

1. nstall the laser on the base by rotating the connecting knob

counter-clockwise.

2. The laser can be rotated on the base.

3. The laser can be hung on a wall with a nail or screw.

Operating Instructions

Dot or Line

Control Button

Manual Mode LED

Power LED

Horizontal Line,

Vertical Line,

Manual Mode

Control Button

ower LED

LED is on: power is on

LED is off: power is off

LED is flashing: low voltage

6222H_Manuals 10/2/12 8:54 AM Page 8

Manual Mode LED

LED is flashing: the laser is in manual mode

LED is off: the laser is in self-leveling mode

ower On/Off

Unlock the laser by rotating the compensator lock and on/off switch

from the off (down) position to the on (up) position as shown

below, the laser is on, and the power LED is on.

Lock the laser by rotating the switch to the off (down) position, the

laser is off, and the power LED is off.

Note: Product must be within ± 3° of level for self-leveling feature

to function properly. Greater than ± 3° will result in an alarm

condition (flashing laser and intermittent beeping sound).

Locked Unlocked

6222H_Manuals 10/2/12 8:54 AM Page 9

Beam Configurations

Unlock the laser and the laser is on, the

configuration of the laser beams is as

follows:

Press the button once and the vertical line

is off, the configuration of the laser beams is

as follows:

Press the button once again and the

horizontal lines are off and the vertical line

is on, the configuration of the laser beams is

as follows:

Press the button once again, both

horizontal lines and the vertical line will be

off, there are no laser beams.

Press the button, the laser will produce

three laser dots (front, up and down dot).

Press the button again, the laser will switch to line laser mode.

The button controls switching between the laser line and

laser dot modes.

6222H_Manuals 10/2/12 8:54 AM Page 10

Inhaltsverzeichnis

Andere Johnson Laser-Nivelliergerät Handbücher

Johnson

Johnson 40-6688 Bedienungsanleitung

Johnson

Johnson 40-6535 Bedienungsanleitung

Johnson

Johnson 40-6250 Bedienungsanleitung

Johnson

Johnson 40-6060 Bedienungsanleitung

Johnson

Johnson 40-0918 Bedienungsanleitung

Johnson

Johnson HOT SHOT 9105/40-0910 Bedienungsanleitung

Johnson

Johnson 40-6065 Bedienungsanleitung

Johnson

Johnson 40-6670 Bedienungsanleitung

Johnson

Johnson 40-6551 Bedienungsanleitung

Johnson

Johnson 40-6174 Bedienungsanleitung

Johnson

Johnson 40-6674 Bedienungsanleitung

Johnson

Johnson 9100 Bedienungsanleitung

Johnson

Johnson 40-6680 Bedienungsanleitung

Johnson

Johnson 40-6936 Bedienungsanleitung

Johnson

Johnson 40-6926 Bedienungsanleitung

Johnson

Johnson 40-6028 Bedienungsanleitung

Johnson

Johnson 40-6636 Bedienungsanleitung

Johnson

Johnson 40-6690 Bedienungsanleitung

Johnson

Johnson 40-6692 Bedienungsanleitung

Johnson

Johnson 40-6620 Bedienungsanleitung

Johnson

Johnson 40-6584 Bedienungsanleitung

Johnson

Johnson 40-6650 Bedienungsanleitung

Johnson

Johnson 1760-2400 Bedienungsanleitung

Johnson

Johnson 40-6515 Bedienungsanleitung

Beliebte Laser-Nivelliergerät Handbücher anderer Marken

Nedo

Nedo ET-5 Bedienungsanleitung

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Bedienungsanleitung

LaserLiner

LaserLiner X2-Laser Bedienungsanleitung

Spectra

Spectra LL300N Bedienungsanleitung

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Bedienungsanleitung

Nedo

Nedo Crossliner 4 Bedienungsanleitung

Lasertec

Lasertec FX360G Bedienungsanleitung

Flex

Flex ALC 8 Bedienungsanleitung

Black & Decker

Black & Decker LZR5 Bedienungsanleitung

Cocraft

Cocraft HL 20-SG Bedienungsanleitung

Zircon

Zircon iLine Bedienungsanleitung

HWH

HWH 310 SERIES Bedienungsanleitung

Leica

Leica iCON robot 60 Bedienungsanleitung

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Bedienungsanleitung

LaserLiner

LaserLiner ActiveFinder XP Bedienungsanleitung

DeWalt

DeWalt DW082 Bedienungsanleitung

imex

imex EL20 Bedienungsanleitung

Fixturlaser

Fixturlaser NXA D I-0912 Bedienungsanleitung