JRC JHS-183 Bedienungsanleitung

Automatic Identification SystemAutomatic Identification System

INSTRUCTIONINSTRUCTION

MANUALMANUAL

01ETM ISO 9001, ISO 14001 Certified

Printed in Japan

Marine Service Department

+81-3-3492-1305

+81-3-3779-1420

[email protected]

Telephone :

Facsimile :

e-mail :

AMSTERDAM Branch

Telephone :

Facsimile :

e-mail :

+31-20-658-0750

+31-20-658-0755

[email protected]

SEATTLE Branch

Telephone :

Facsimile :

e-mail :

+1-206-654-5644

+1-206-654-7030

[email protected]

CODE No.7ZPJD0553ACODE No.7ZPJD0553A

MAY 2013 Edition 1 JRCMAY 2013 Edition 1 JRC

Not use the asbestos

For further information,contact:

URL http://www.jrc.co.jp

JHS-183JHS-183



Preface

Thank you for purchasing the JHS-183 Automatic Identification System (AIS).

The JHS-183 is a Class A shipborne AIS equipment that communicates ship's static data and ship's

dynamic data with other vessels or coast stations on VHF channels using TDMA techniques.

xBe sure to read this manual before using the equipment.

xKeep this manual near at hand for quick reference.

FCC Warning

Changes or modifications not expressly approved by JRC, could void your

authority to operate this radiotelephone.

Radio Frequency Interference Statement

This radiotelephone has been tested and found to comply with the limits

for a Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This radiotelephone generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this radiotelephone in a residential area

is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

RF exposure compliance (MPE* compliance by FCC)

The antenna used for this transmitter must be installed

to provide a separation distance of at least 0.6 meters

(2 feet) from all persons and must not be co-located or

operating in conjunction with any other antenna or

transmitter. Users and installers must be provided with

antenna installation instructions and transmitting

operating conditions for satisfying RF exposure

compliance.

* Maximum Permissible Exposure (MPE): The rms and peak

electric and magnetic field strength, their squares, or the

plane-wave equivalent power densities associated with these fields

to which a person may be exposed without harmful effect and with

an acceptable safety factor.

7ZPJD0553A

WARNING

Before Operation

Concerning the symbols

This manual uses the following symbols to explain correct operation and to prevent injury or

damage to property.

The symbols and descriptions are as follows. Understand them before proceeding with this

manual.

Indicates a warning that, if ignored, may

result in serious injury or even death.

Indicates a caution that, if ignored, may

result in injury or damage to property.

Examples of symbols

The △symbol indicates caution (including DANGER and WARNING).

The illustration inside the △symbol specifies the content of the caution more

accurately. (This example warns of possible electrical shock.)

The symbol indicates that performing an action is prohibited.

The illustration inside the symbol specifies the contents of the prohibited

operation. (In this example disassembly is prohibited.)

The ●symbol indicates operations that must be performed.

The illustration inside the ●symbol specifies obligatory instructions. (In this

example unplugging is the obligatory instruction.)

Concerning warning labels

A warning label is pasted to the top cover of this product.

Do not remove, damage or modify the label.

CAUTION

iii

WARNING

Handling Precautions

Do not disassemble or customize this unit. Doing so may cause fire,

electrical shock or malfunction.

Do not use a voltage other than specified. Doing so may cause fire,

electrical shock or malfunction.

Do not attempt to check or repair the interior of this equipment by

non-qualified service personnel, as doing so may cause fire, electric shock

or malfunction. If any malfunctions are detected, contact our service center

or agents.

CAUTION

Do not use this equipment for anything other than specified.

Doing so may cause malfunction or damage to persons.

Do not adjust the trimmer resistors or the trimmer capacitors on the PCB

unit, except when and if they need to be adjusted.

Doing so may cause malfunction or damage to persons. They are preset at

the factory.

Do not install this equipment in a place other than specified or in one with

excessive humidity, steam, dust or soot. Doing so may cause fire, electric

shock, malfunction or damage to persons.

Do not get this equipment wet or spill any liquids on or near this equipment.

Doing so may cause electrical shock or malfunction.

Do not place this equipment anywhere vibration or impact is likely to occur.

Doing so may cause a fall or damage to property and persons.

Do not place anything on this equipment.

Doing so may cause a fall, malfunction or damage to property and persons.

Leave installation of this equipment to our service center or agents.

Installation by an unauthorized person may happen to malfunction.

Use this AIS equipment only as assisting device for collision avoidance.

Also, the officer should make the final decision to maneuver by himself.

The AIS may not give certainly complete information of shipping traffic in its

vicinity.

External Views

NTE-183 AIS Transponder

NCM-983 AIS Controller

・Optional equipment

NQE-5183 Connection Box

NBD-577C Power Supply Unit

vii

CONTENTS

Preface ............................................................................................................... ⅰ

Before Operation ................................................................................................. ⅱ

Handling Precautions .......................................................................................... ⅲ

External Views .................................................................................................... ⅴ

1. GENERAL ..................................................................................................... 1-1

1.1 Outlines ....................................................................................................... 1-1

1.2 Features ...................................................................................................... 1-1

1.3 Components ................................................................................................ 1-2

1.3.1 Standard Components ............................................................................. 1-2

1.3.2 Options .................................................................................................... 1-2

1.3.3 Configuration ............................................................................................ 1-3

1.4 Outline ........................................................................................................ 1-4

2. INSTALLATION DIAGRAM ........................................................................... 2-1

3. PART NAMES AND FUNCTIONS ................................................................. 3-1

3.1 NCM-983 AIS Controller ............................................................................. 3-1

4. DISPLAYS ..................................................................................................... 4-1

5. OPERATION ................................................................................................. 5-1

5.1 Menu Tree ................................................................................................... 5-1

5.2 Basic Operation .......................................................................................... 5-2

5.2.1 Turning ON the power................................................................................ 5-2

5.2.1.1 Other Ships List ...................................................................................... 5-4

5.2.1.2 Other Ship’s Detail Information ............................................................... 5-5

5.2.1.3 Own Ship’s Detail Information................................................................. 5-6

5.2.1.4 Display Setup of Other Ships List ......................................................... 5-10

5.2.1.5 Graphic Display ..................................................................................... 5-11

5.2.2 Turning OFF the Power ............................................................................ 5-11

5.2.3 Alarm ....................................................................................................... 5-12

5.2.3.1 Guard Zone Alarm ................................................................................ 5-12

5.2.4 Character Pad Window Display and Input Method ................................. 5-13

5.2.5 Numerical Input........................................................................................ 5-14

5.3 Main Menu ................................................................................................ 5-15

5.3.1 Voyage Data Setting .............................................................................. 5-16

5.3.1.1 Navigational Status ............................................................................... 5-17

5.3.1.2 Destination Input................................................................................... 5-18

5.3.1.3 Estimated Time of Arrival (ETA) Input ................................................... 5-18

5.3.1.4 Draught Value Input .............................................................................. 5-18

5.3.1.5 Persons on Board Input ........................................................................ 5-19

5.3.1.6 Ship type U.S........................................................................................ 5-19

5.3.1.7 Type of Ship/Cargo Type Selection....................................................... 5-20

5.3.1.8 Re-load Destination from history Data .................................................. 5-22

5.3.2 Message Menu ........................................................................................ 5-23

5.3.2.1 Editing / Sending Messages ................................................................. 5-24

5.3.2.2 TX Tray (Viewing Transmitted Messages) ............................................ 5-29

5.3.2.3 RX Tray (Viewing Received Messages)................................................ 5-31

viii

5.3.2.4 Interrogation.......................................................................................... 5-33

5.3.2.5 Long Range Messages......................................................................... 5-35

5.3.3 Maintenance ............................................................................................ 5-37

5.3.3.1 Self Diagnosis ..................................................................................... 5-38

5.3.3.2 Communication Test ............................................................................. 5-41

5.3.3.3 AIS Alarm.............................................................................................. 5-42

5.3.3.4 Sensor Status ...................................................................................... 5-44

5.3.3.5 Event Log.............................................................................................. 5-45

5.3.3.6 Software Version................................................................................... 5-45

5.3.4 Set up Menu ............................................................................................ 5-46

5.3.4.1 Display Setting of Date and Time (DATE&TIME) .................................. 5-47

5.3.4.2 My Controller ........................................................................................ 5-48

5.3.4.3 Regional Channel ................................................................................. 5-52

5.3.4.4 Power Reduction .................................................................................. 5-57

5.3.4.5 Registration of Group Ships (GROUP SHIP) ........................................ 5-57

5.3.4.6 Change of Channels and Transmission Power (CHANNEL/POWER) .. 5-59

5.3.4.7 Change Password (PASSWORD) ........................................................ 5-60

5.3.4.8 Display Style of Latitude and Longitude (POSN DISP SET) ................. 5-61

5.3.4.9 Indication of AIS SART test signal (SART TEST SET).......................... 5-61

5.3.4.10 Long-Range Set.................................................................................. 5-61

5.3.4.11 Prohibition of Transmission (SILENT MODE) ..................................... 5-63

5.3.4.12 CCRP set............................................................................................ 5-63

5.3.4.13 Initial Setting of Own Ship’s Heading Direction (NSK UNIT)............... 5-64

5.4 Explanation of Graphic display ................................................................... 5-67

5.4.1 The Outline of Display ............................................................................. 5-67

5.4.2 Operation for Graphic display .................................................................. 5-67

5.4.3 Setting the Contents of Graphic Display .................................................. 5-68

5.4.3.1 Display the Setting Screen.................................................................... 5-68

5.4.3.2 Display Item Explanation ...................................................................... 5-68

5.4.3.3 Display.................................................................................................. 5-70

5.4.4 Selection of Other Ships ........................................................................ 5-71

5.4.5 Auto Range Setting.................................................................................. 5-71

6. MAINTENANCE AND INSPECTION ............................................................. 6-1

6.1 General Maintenance and Inspection ......................................................... 6-1

6.2 Periodic Inspection ...................................................................................... 6-2

6.2.1 Confirming the Own Ship's Information...................................................... 6-2

6.2.2 Confirming the TRX Channel ..................................................................... 6-3

6.2.3 Confirming the Alarm Status ...................................................................... 6-3

6.2.4 Confirming the Conditions of the Sensors ................................................. 6-6

6.3 Trouble Shootings......................................................................................... 6-7

6.3.1 Trouble Shootings...................................................................................... 6-7

6.3.2 Maintenance Units ................................................................................... 6-10

6.3.3 Spare parts for periodic maintenance ...................................................... 6-10

7. AFTER-SALES SERVICE ............................................................................. 7-1

Warranty .......................................................................................................... 7-1

Holding period of Spare parts............................................................................ 7-1

Before returning to repair ................................................................................ 7-1

Periodical maintenance recommended ........................................................... 7-1

Andere Handbücher für JHS-183

Inhaltsverzeichnis

Andere JRC Andere Handbücher

JRC

JRC JCY-1800 - Bedienungsanleitung

Beliebte Andere Handbücher anderer Marken

GO Industries

GO Industries 38017 Bedienungsanleitung

Cissell

Cissell 30LBCMAN2 Bedienungsanleitung

RIDGID

RIDGID K-60SP Bedienungsanleitung

Gage Bilt

Gage Bilt GB751SH-5 Bedienungsanleitung

OVE

OVE SIERRA 60 Bedienungsanleitung

ReelCraft

ReelCraft 7800 OLB21 Bedienungsanleitung

Body Armor 4x4

Body Armor 4x4 ECO-SERIES Bedienungsanleitung

ROBLIN

ROBLIN DROP Benutzerhandbuch

EMG

EMG EMG-ACB BARREL Service-Handbuch

MiniSolar

MiniSolar MT-150 Bedienungsanleitung

Parkside

Parkside PSZ 250 B2 Bedienungsanleitung

ABB

ABB REM 610 Produkthandbuch

Parkside

Parkside 55992 Betriebsanleitung

Skyjacker

Skyjacker F250 Bedienungsanleitung

IBM

IBM IBM SYSTEM Z Installationsanleitung

Grech Motors

Grech Motors G28 Bedienungsanleitung

NOVAK

NOVAK BATTERY CARE SHEET Leitfaden

Telemotive

Telemotive blue PiraT Mini Benutzerhandbuch