Julabo CORIO CP Montageanleitung

Heating immersion circulator, open bath heating circulator,

refrigerated circulator

Original operating manual

1.950.0900.en.V05 12/2022

www. .com information@itm.com1.800.561.8187

Legal

The content of this operating manual is protected by copyright. Information,

including texts, images, and other contents may not be reproduced,

distributed, transmitted, stored or otherwise used in any form without prior

explicit written consent.

Illustrations in this operating manual are for illustrative purposes and are not

necessarily displayed to scale.

www. .com information@itm.com1.800.561.8187

1Foreword............................................................................................ 6

2About this manual............................................................................. 7

2.1 Original JULABO spare parts ......................................................... 7

2.2 Accessories.................................................................................... 7

2.3 Warnings........................................................................................ 8

2.4 Symbols used................................................................................. 9

3Intended use .................................................................................... 10

4Safety ............................................................................................... 11

4.1 Safety instructions........................................................................ 11

4.2 Safety symbols............................................................................. 13

4.3 Safety function ............................................................................. 14

5Product description ........................................................................ 15

5.1 Product overview.......................................................................... 15

5.2 Function description ..................................................................... 15

5.3 Operating and functional elements............................................... 16

5.3.1 Key description........................................................................ 17

5.4 Interfaces ..................................................................................... 18

5.4.1 RS232 interface ...................................................................... 18

5.4.2 USB-A interface ...................................................................... 19

5.5 Operating interface....................................................................... 20

5.6 Alarm messages........................................................................... 21

5.7 Main menu ................................................................................... 22

5.8 Technical data.............................................................................. 23

5.8.1 Material of parts that come into contact with the medium ....... 25

5.8.2 Technical data for refrigerated circulators ............................... 26

5.8.3 Bath fluids ............................................................................... 32

5.8.4 Hoses...................................................................................... 33

6Transport and installation .............................................................. 34

6.1 Transporting the device................................................................ 34

6.2 Install the device at the operating location ................................... 35

7Initial operation................................................................................ 36

7.1 Mounting the circulator................................................................. 36

7.1.1 Mount heating or refrigerated circulator .................................. 36

www. .com information@itm.com1.800.561.8187

7.2 Connect the device to the power supply....................................... 37

7.2.1 Connect bridge mounted or heating circulator......................... 37

7.2.2 Connect refrigerated circulator ................................................ 38

7.3 Connecting an external system .................................................... 39

7.3.1 Connect an external system with screw connections .............. 40

7.3.2 Connect an external system with barbed fittings ..................... 42

7.4 Set high temperature safety function............................................ 43

7.5 Fill device ..................................................................................... 44

7.6 Set up power supply for the refrigerated circulator....................... 44

7.7 Adjusting the flow of the bath fluid................................................ 45

7.8 Set chiller mode............................................................................ 46

7.9 Set temperature warning limits..................................................... 46

8Operation ......................................................................................... 48

8.1 Switch on the unit......................................................................... 48

8.2 Switch off the unit......................................................................... 48

8.3 Configuring setpoint temperature ................................................. 48

8.4 Start temperature control application............................................ 49

8.5 Activate autostart function ............................................................ 49

8.6 Record data.................................................................................. 50

8.6.1 Record measurement data...................................................... 50

8.6.2 Reading out blackbox data...................................................... 50

8.7 Adjust pump ................................................................................. 51

8.8 Remote control device.................................................................. 51

8.8.1 Remote control device using USB interface............................ 51

8.8.2 Set RS232 interface parameters ............................................. 52

8.8.3 Remote control device using RS232 interface ........................ 53

8.8.4 Request device status............................................................. 53

8.9 Setting the timer ........................................................................... 54

8.10 Adjusting the temperature sensor (ATC) ...................................... 55

8.10.1 Adjust internal temperature sensor.......................................... 55

8.10.2 Enabling ATC function............................................................. 56

8.11 Device Reset................................................................................ 56

9Maintenance..................................................................................... 57

9.1 Check safety symbols .................................................................. 57

9.2 Check the functionality of high temperature cut-off ...................... 57

www. .com information@itm.com1.800.561.8187

9.3 Test the low liquid level safety function ........................................ 57

9.4 Replace detachable power cord................................................... 58

9.5 Emptying ...................................................................................... 58

9.6 Clean device ................................................................................ 59

9.7 Device storage ............................................................................. 59

9.8 Technical Service......................................................................... 60

9.9 Warranty....................................................................................... 61

10 Disposal ........................................................................................... 61

10.1 Device disposal ............................................................................ 61

11 EC Declaration of Conformity ........................................................ 62

1UK Declaration of Conformity ........................................................ 63

2Appendix.......................................................................................... 64

2.1 Interface commands..................................................................... 64

2.1.1 IN commands.......................................................................... 65

2.1.2 OUT commands...................................................................... 66

2.1.3 Status commands ................................................................... 66

2.1.4 Status messages..................................................................... 67

2.2 Alarms and Warnings................................................................... 68

2.3 Error messages in configuration process ..................................... 71

www. .com information@itm.com1.800.561.8187

Foreword

1 Foreword

Congratulations!

You have made an excellent choice.

JULABO would like to thank you for the trust you have placed in our company

and products.

This operating manual will help you become acquainted with the use of our

units. Read the operating manual carefully. Keep the operating manual handy at

all times.

www. .com information@itm.com1.800.561.8187

About this manual

2 About this manual

This manual is intended for the equipment specified on the cover page.

NOTE

Observe the safety instructions!

Read the Safety section of this manual before using the equipment for the

first time.

2.1 Original JULABO spare parts

Hassle-free continuous operation and safety also depend on the quality of the

spare parts used.

Only original JULABO spare parts guarantee the highest possible quality and

safety. Original JULABO spare parts are available directly from JULABO or your

specialist dealer.

Please note that JULABO cannot provide a warranty service if non-original

JULABO spare parts are used.

2.2 Accessories

JULABO offers awide range of accessories for the devices. Accessories are not

described in this manual.

The complete range of accessories for the devices described in this manual

can be found on our website. Use the Search function on the website.

www. .com information@itm.com1.800.561.8187

About this manual

2.3 Warnings

The manual contains warnings to increase safety when using the device.

Warnings must always be observed.

A warning sign displayed in signal color precedes the signal word. The signal

word, highlighted in color, specifies the severity of the hazard.

DANGER

This signal word designates a danger with a high level of risk which, if it not

prevented, will result in death or serious injuries.

WARNING

This signal word designates a danger with a medium level of risk which, if it

not prevented, may result in death or serious injuries.

CAUTION

This signal word designates a danger with a low level of risk which, if it not

prevented, may result in minor to moderate injuries.

NOTE

This signal word designates a possibly harmful situation. If it is not avoided,

the system or objects in its vicinity may be damaged.

www. .com information@itm.com1.800.561.8187

About this manual

2.4 Symbols used

Various symbols are used throughout this manual to aid reading

comprehension. This list describes the symbols used.

Tools needed for the following approach

Prerequisite to be met for the following procedure

1. Numbered action steps

Interim result for individual action steps

Additional note for individual action steps

Final result of a procedure

<> Terms in angle brackets denote control menu

[] Terms in square brackets denote keys, softkeys and buttons

www. .com information@itm.com1.800.561.8187

Intended use

3 Intended use

This section defines the purpose of the unit so that the operator can operate the

unit safely and avoid misuse.

JULABO circulators are laboratory devices that are designed for temperature

control applications with liquid media in a bath tank or with a cooling machine.

An external loop circuit can be connected to the pump connectors so that the

temperature of the bath media can be kept constant.

Only use the device if it is in technically perfect condition and only use it in

accordance with its intended use. Be aware of safety issues or hazards and

comply with the operating manual! In particular, always immediately rectify

faults that could impair safety!

The circulators are not suitable for direct temperature control application of

food, other consumables or pharmaceutical or other medical products.

The devices are not suitable for use in an explosive environment.

The devices are not intended for use in living areas. They may cause interference

with radio reception.

www. .com information@itm.com1.800.561.8187

Andere Handbücher für CORIO CP

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Julabo Laborausrüstung Handbücher

Julabo

Julabo SW23 Bedienungsanleitung

Julabo

Julabo MAGO MX Montageanleitung

Julabo

Julabo Pura 4 Bedienungsanleitung

Julabo

Julabo CORIO CD Montageanleitung

Julabo

Julabo CORIO CP Bedienungsanleitung

Julabo

Julabo MAGIO MS-Z Montageanleitung

Julabo

Julabo ME-4 Bedienungsanleitung

Julabo

Julabo Presto Series Bedienungsanleitung

Julabo

Julabo HT30-M1 Bedienungsanleitung

Julabo

Julabo F81-HL Bedienungsanleitung

Julabo

Julabo Magio MX Montageanleitung

Julabo

Julabo MAGIO MS Montageanleitung

Julabo

Julabo CORIO CD Montageanleitung

Julabo

Julabo HT60-M3 Bedienungsanleitung

Julabo

Julabo CORIO CD-200F Montageanleitung

Julabo

Julabo CORIO CD Bedienungsanleitung

Julabo

Julabo DYNEO DD Bedienungsanleitung

Julabo

Julabo HT60-M2 Bedienungsanleitung

Julabo

Julabo MAGIO MS-310F Bedienungsanleitung

Julabo

Julabo CF31 Bedienungsanleitung

Julabo

Julabo F12-ED Bedienungsanleitung

Julabo

Julabo MAGIO MS Montageanleitung

Julabo

Julabo Corio CP Bedienungsanleitung

Julabo

Julabo CORIO CD Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung