JVC CDA-5755 Bedienungsanleitung

CASSETTE RECEIVER KS-FX621

ENGLISH

INSTRUCTIONS

 !"

§”·π–π”

GET0113-001A

[U]

 !"#$ KS-FX621

For installation and connections, refer to the separate manual.

 !"#$%&'()*+,-./0

°√ÿ≥“¥Ÿ§ŸË¡◊Õ∑’Ë·¬°µË“ßÀ“° „π°“√µ‘¥µ—Èß·≈–°“√‡™◊ËÕ¡µËÕ

«‘∑¬ÿ‡§√◊ËÕß‡≈Ëπ‡∑ª

KS-FX621



‰∑¬

MODE SCM

11 R P T 12 R N D

109

78 M O

ENCover-KS-FX621[Uf12/12/02, 3:06 pm2

ENGLISH

(standby/on/attenuator)

How to reset your unit

While holding SEL (select), press (standby/

on/attenuator) for more than 2 seconds.

This will reset the built-in microcomputer.

NOTE:

Your preset adjustments — such as preset channels or sound

adjustments — will also be erased.

SEL (select)

How to use the MODE button

If you press MODE, the unit goes into functions mode then the number buttons and

¢/ 4buttons work as different function buttons.

Ex.: When number button 2 works as MO (monaural) button.

To use these buttons as number buttons again after pressing MODE, wait for 5 seconds without

pressing any number button until the functions mode is cleared.

• Pressing MODE again also clears the functions mode.

MODE

MO RPT RND

10 11 12

Time countdown indicator

EN02-04-KS-FX621[U]f12/12/02, 7:13 PM2

ENGLISH

Thank you for purchasing a JVC product. Please read all instructions carefully before operation,

to ensure your complete understanding and to obtain the best possible performance from the unit.

CONTENTS

How to reset your unit .............................. 2

How to use the MODE button .................. 2

LOCATION OF THE BUTTONS ........... 4

Control panel ............................................ 4

BASIC OPERATIONS ...................... 5

Turning on the power ............................... 5

RADIO OPERATIONS ..................... 6

Listening to the radio ................................ 6

Storing stations in memory ...................... 7

Tuning in to a preset station ..................... 8

TAPE OPERATIONS ....................... 9

Listening to a cassette ............................. 9

Finding the beginning of a tune ................ 10

Other convenient tape functions .............. 10

SOUND ADJUSTMENTS .................. 12

Adjusting the sound ................................. 12

Turning on/off the loudness function ........ 13

Selecting preset sound modes .................. 13

Storing your own sound adjustments ....... 14

OTHER MAIN FUNCTIONS ............... 15

Setting the clock ....................................... 15

Selecting the level display—LEVEL ......... 16

Selecting the external component

to use—EXT IN ..................................... 17

Detaching the control panel ..................... 18

CD CHANGER OPERATIONS ............. 19

Playing discs ............................................ 19

Selecting the playback modes ................. 21

EXTERNAL COMPONENT OPERATIONS ... 22

Playing an external component ................ 22

USING THE REMOTE CONTROLLER .... 23

Location of the buttons ............................. 24

TROUBLESHOOTING ..................... 25

MAINTENANCE ............................ 27

SPECIFICATIONS .......................... 28

BEFORE USE

For safety....

• Do not raise the volume level too much, as this

will block outside sounds, making driving

dangerous.

• Stop the car before performing any complicated

operations.

Temperature inside the car....

If you have parked the car for a long time in hot

or cold weather, wait until the temperature in the

car becomes normal before operating the unit.

EN02-04-KS-FX621[U]f12/12/02, 7:13 PM3

ENGLISH

MODE SCM

11 R P T 12 R N D

109

78 MO

klx

23 45 67

89p

wr t yuio ;

LOCATION OF THE BUTTONS

Control panel

1(standby/on/attenuator) button

2LOUD (loudness) button

3SEL (select) button

4Display window

5Cassette compartment

60(eject) button

7CD-CH (CD changer) button

8FM/AM button

9TAPE 23 button

p¢/ 4buttons

•

Also function as SSM buttons when pressed

together.

q+/– button

wDISP (display) button

eRemote sensor

rMO (monaural) button

tRPT (repeat) button

yRND (random) button

uNumber buttons

iMODE button

oSCM (sound control memory) button

;(control panel release) button

Display window

aFM band number indicators

FM1, FM2, FM3

sAM band indicator

dTAPE indicator

fTuner reception indicators

MO (monaural), ST (stereo)

gRND (random) indicator

hRPT (repeat) indicator

jCD-CH (CD changer) indicator

kSCM (sound control memory) indicator

lVolume (or audio) level indicator

MP3 indicator

•

Lights up only when playing an MP3 disc on a

JVC MP3-compatible CD changer

zMain display

xLOUD (loudness) indicator

EN02-04.KS-FX621[U]f 17/12/02, 4:57 pm4

ENGLISH

BASIC OPERATIONS

Adjust the volume.

Adjust the sound as you want.

(See pages 12 – 14.)

To drop the volume in a moment

Press briefly while listening to any

source. “ATT” starts flashing on the display, and

the volume level will drop in a moment.

To resume the previous volume level, press the

button briefly again.

To turn off the power

Press and hold for more than 1 second.

Note:

When you use this unit for the first time, set the built-in

clock correctly, see page 15.

To decrease the volume.

To increase the volume.

Turning on the power

Turn on the power.

Note on One-Touch Operation:

When you select a source in step 2 below, the

power automatically comes on. You do not have

to press this button to turn on the power.

Select the source.

To operate the tuner (FM or AM),

see pages 6 –8.

To operate the tape,

see pages 9 –11.

To operate the CD changer,

see pages 19 –21.

To operate the external component,

see page 22.

Volume level appears.Volume (or audio) level

indicator (See page 16).

MODE SCM

11 R P T 12 R N D

109

78 MO

EN05-05-KS-FX621[U]f12/12/02, 7:13 PM5

ENGLISH

Listening to the radio

You can use either automatic searching or manual

searching to tune in to a particular station.

Searching a station automatically:

Auto search

Select the band (FM1 – 3, AM).

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to an

FM broadcast.

Start searching a station.

When a station is received, searching stops.

RADIO OPERATIONS

Press ¢to search

stations of higher

frequencies.

Press 4to search

stations of lower

frequencies.

To stop searching before a station is received,

press the same button you have pressed for

searching.

Searching a station manually:

Manual search

Select the band (FM1 – 3, AM).

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to an

FM broadcast.

Press and hold ¢or 4until

“M (manual)” starts flashing on the

display.

Selected

band appears.

Selected band appears.

MODE SCM

11 R P T 12 R N D

109

78 MO

FM1 FM2 FM3

Lights up when receiving an

FM stereo broadcast with

sufficient signal strength.

FM1 FM2 FM3

EN06-08-KS-FX621[U]ff 12/12/02, 7:14 PM6

ENGLISH

Storing stations in memory

You can use one of the following two methods to

store broadcasting stations in memory.

• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

• Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM band

(FM1, FM2 and FM3).

Select the FM band (FM1 –3) you want

to store FM stations into.

Press and hold both buttons for more

than 2 seconds.

Local FM stations with the strongest signals are

searched and stored automatically in the band

number you have selected (FM1, FM2 or FM3).

These stations are preset in the number buttons —

No.1 (lowest frequency) to No.6 (highest frequency).

When automatic preset is over, the station stored

in number button 1 will be automatically tuned in.

Tune in to a station you want while“M”

is flashing.

• If you release your finger from the button,

the manual mode will automatically turn off

after 5 seconds.

• If you hold down the button, the frequency

keeps changing (in 50 kHz intervals for FM

and 9 kHz intervals for AM) until you release

the button.

When an FM stereo broadcast is hard to

receive:

1Press MODE to enter the functions

mode while listening to an FM

stereo broadcast.

2Press MO (monaural), while still in

the functions mode, so that the MO

indicator lights up on the display.

Each time you press the button,

the MO indicator lights up and

goes off alternately.

When the MO indicator is lit on the display, the

sound you hear becomes monaural but the

reception will be improved.

Press ¢to tune

in to stations of higher

frequencies.

Press 4to tune

in to stations of lower

frequencies.

“SSM” appears, then disappears when automatic

preset is over.

MODE

8 MO

FM1 FM2 FM3

EN06-08-KS-FX621[U]f12/12/02, 7:14 PM7

ENGLISH

Manual preset

You can preset up to 6 stations in each band (FM1,

FM2, FM3 and AM) manually.

Ex.: Storing an FM station of 88.3 MHz into the

preset number 1 of the FM1 band

Select the band (FM1 –3, AM) you

want to store stations into (in this

example, FM1).

Tune in to a station (in this example,

of 88.3 MHz).

Press and hold the number button

(in this example, 1) for more than 2

seconds.

Press ¢to tune

in to stations of higher

frequencies.

Press 4to tune

in to stations of lower

frequencies.

Repeat the above procedure to store

other stations into other preset

numbers.

Notes:

• A previously preset station is erased when a new station

is stored in the same preset number.

• Preset stations are erased when the power supply to

the memory circuit is interrupted (for example, during

battery replacement). If this occurs, preset the stations

again.

Tuning in to a preset station

You can easily tune in to a preset station.

Remember that you must store stations first. If you

have not stored them yet, see “Storing stations in

memory” on pages 7 and 8.

Select the band (FM1 –3, AM).

Select the number (1 –6) for the preset

station you want.

“P 1” flashes for a few seconds.

FM1 FM2 FM3

MO RPT RND

10 11 12

EN06-08-KS-FX621[U]f12/12/02, 7:14 PM8

ENGLISH

TAPE OPERATIONS

To fast-forward or rewind a tape

To stop fast forward or rewind at any position

on the tape, press TAPE 23.

Tape play starts from that position on the tape.

Note:

When the tape reaches its end while fast-forwarding, the

tape direction will be changed automatically.

Listening to a cassette

You can play back type I(normal) tapes.

Insert a cassette into the cassette

compartment.

The unit turns on and tape

play starts automatically.

When one side of the tape

reaches its end during play,

the other side of the tape

automatically starts playing.

(Auto Reverse)

Note on One-Touch Operation:

When a cassette is already in the cassette

compartment, pressing TAPE 23 turns on the

unit and tape play starts automatically.

Select the tape direction.

Each time you press

TAPE 23, the tape direction

changes alternately

forward (TAPE ) and

reverse (TAPE ).

To stop play and eject the cassette

Press 0.

Tape play stops and the cassette automatically

ejects from the cassette compartment. The

source changes to the previously selected one.

If you change the source, tape play also stops

(without ejecting the cassette this time).

• You can also eject the cassette by pressing 0

while the unit is turned off.

Press ¢for more than 1

second to fast-forward the tape.

When the tape reaches its end,

the tape is reversed and playback

starts from the beginning of the

other side.

Press 4for more than 1

second to rewind the tape.

When the tape reaches its end,

playback of the same side starts.

MODE SCM

11 RPT 12 R N D

109

78 MO

EN09-11.KS-FX621[U]f12/13/02, 8:41 AM9

ENGLISH

Finding the beginning of a tune

Multi Music Scan allows you to automatically start

playback from the beginning of a specified tune.

You can specify up to 9 tunes ahead of or before

the current tune.

During playback

Specify how many tunes ahead of or

before the current tune the one you want

is located.

Each time you press the buttons, the number

changes up to ±9.

When the beginning of the specified tune is

located, playback starts automatically.

Notes:

• While locating a specified tune:

– If the tape is rewound to its beginning, playback

starts from the beginning of that side.

– If the tape is fast-forwarded to the end, it is

reversed and played from the beginning of the

other side.

• In the following cases, the Multi Music Scan

function may not operate correctly:

– Tapes with tunes having long pianissimo passages

(very quiet parts) or non-recorded portions between

tunes.

– Tapes with short non-recorded sections.

– Tapes with high level of noise or humming between

tunes.

– Tapes with tunes recorded at low recording levels.

Press ¢to locate a tune

ahead of the current tune on

the cassette.

Press 4to locate a tune

before the current tune on the

cassette.

Other convenient tape functions

Skipping the blank portions on the tape

You can skip blank portions between the tunes

(Blank Skip).

When this function is on, the unit skips blank

portions of 15 seconds or more, fast-forwards to

the next tune, then starts playing it.

Press and hold SEL (select) for more

than 2 seconds.

“CLOCK H”, “CLOCK M”, “LEVEL”, “B. SKIP”

or “EXT IN*” appears on the display.

* Displayed only when one of

the following sources is

selected — FM, AM and

Tape.

Press ¢or 4to select

“B. SKIP (blank skip).”

Press + to select “ON.”

Now Blank Skip is activated.

Finish the setting.

To cancel Blank Skip, repeat the same procedure

and select “OFF” in step 3 by pressing –.

CLOCK H CLOCK M

LEVEL

EXT IN

B. SKIP

EN09-11.KS-FX621[U]f12/13/02, 8:41 AM10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere JVC Autoempfänger Handbücher

JVC

JVC KD-G464 Bedienungsanleitung

JVC

JVC KD-SX991R Bedienungsanleitung

JVC

JVC KW-XC770J Leitfaden

JVC

JVC KD-G209 Administratorhandbuch

JVC

JVC KD-SH55 Bedienungsanleitung

JVC

JVC KD-S587 Bedienungsanleitung

JVC

JVC KD-G455 Leitfaden

JVC

JVC KS-F525 Bedienungsanleitung

JVC

JVC KD-DV4401 Bedienungsanleitung

JVC

JVC KS-FX321 Bedienungsanleitung

JVC

JVC KD-R303 Bedienungsanleitung

JVC

JVC KD-S9R Bedienungsanleitung

JVC

JVC KW-ADV790 Leitfaden

JVC

JVC KD-X70BT Bedienungsanleitung

JVC

JVC KD-SX1000R Bedienungsanleitung

JVC

JVC KS-FX288 Bedienungsanleitung

JVC

JVC KD-S891R Bedienungsanleitung

JVC

JVC KDG430 - Radio / CD Bedienungsanleitung

JVC

JVC KD-S680 Bedienungsanleitung

JVC

JVC KD-AHD59 - Radio / HD Bedienungsanleitung

JVC

JVC DVD/CD Receiver KD-DV7308 Bedienungsanleitung

JVC

JVC KD-G322 Leitfaden

JVC

JVC SX50M - KD Radio / CD Player Bedienungsanleitung

JVC

JVC KD-PDR35 Bedienungsanleitung

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung