JVC KD-LX3R Bedienungsanleitung

KD-LX3R

CD RECEIVER

CD-RECEIVER

RECEPTEUR CD

CD-RECEIVER

For installation and connections, refer to the separate manual.

Angaben zu Einbau und Verkabelung entnehmen Sie bitte der gesonderten Anleitung.

Pour l’installation et les raccordements, se référer au manuel séparé.

Zie de afzonderlijke handleiding voor details aangaande het installeren en verbinden van het

toestel.

ENGLISH

DEUTSCH

FRANÇAIS

NEDERLANDS

LVT0239-001A

[E]

INSTRUCTIONS

BEDIENUNGSANLEITUNG

MANUEL D’INSTRUCTIONS

GEBRUIKSAANWIJZING

SEL OFF/0FUNC

RPT

RND

INT/LO

MONO

BANDSOUND SSM RDS

KD-LX3R

DISPMODE PTYTP

For Customer Use:

Enter below the password

you have entered for your

security lock.

Retain this password for

futuer reference.

PASSWORD:

COVER.KD-LX3R[E].E/G/F/N 99.3.9, 5:53 PM3

ENGLISH

Note:

For security reasons, a numbered ID card is provided with this unit, and the same ID number is

imprinted on the unit’s chassis. Keep the card in a safe place, as it will help the authorities to

identify your unit if stolen.

BEFORE USE

* For safety....

• Do not raise the volume level too much, as this

will block outside sounds, making driving

dangerous.

• Stop the car before performing any complicated

operations.

* Temperature inside the car....

If you have parked the car for a long time in hot

or cold weather, wait until the temperature in the

car becomes normal before operating the unit.

Position and reproduction of labels

Bottom panel of the main unit

IMPORTANT FOR LASER

PRODUCTS

Precautions:

1. CLASS 1 LASER PRODUCT

2. DANGER: Invisible laser radiation when

openandinterlock failedordefeated.Avoid

direct exposure to beam.

3. CAUTION: Do not open the top cover.

Therearenouser-serviceablepartsinside.

Leave all servicing to qualified service

personnel.

4. CAUTION: This CD player uses invisible

laser radiation and is equipped with safety

switches to prevent radiation emission

when unloading CDs. It is dangerous to

defeat the safety switches.

5. CAUTION:Useofcontrols,adjustmentsor

performance of procedures other than

those specified herein may result in

hazardous radiation exposure.

CAUTION on Volume Setting

CDs produce very little noise compared with

other sources. If the volume level is adjusted

for the tuner, for example, the speakers may

be damaged by the sudden increase in the

output level. Therefore, lower the volume

before playing a CD and adjust it as required

during playback.

Caution:

This product contains a laser component

of higher laser class than Class 1.

CLASS

LASER 1

PRODUCT

DANGER: Invisible laser

radiationwhenopen and

interlock failedordefeated.

AVOID DIRECT EXPOSURE

TO BEAM. (e)

ADVARSEL: Usynlig laser-

stråling ved åbning, når

sikkerhedsafbrydere erude

af funktion.Undgåudsæt-

telse for stråling. (d)

VARNING:Osynliglaser-

strålning när denna del

är öppnadochspärren är

urkopplad. Betrakta ej

strålen. (s)

VARO: Avattaessa ja suo-

jalukitus ohitettaessa olet

alttiina näkymättömälle

lasersäteilylle. Älä katso

säteeseen. (f)

Name/Rating plate

EN02-05.KD-LX3R[E]/f 99.3.9, 6:13 PM2

ENGLISH

To reset the unit After installing the unit or when you have troubles with

operations, reset the microcomputer built in this unit.

Press the reset button on the front panel using a ball-point pen

or a similar tool.

• REMEMBER your preset adjustments such as preset channels

or sound adjustments will also be erased from memory.

To be continued on the next page

Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to

ensure your complete understanding and to obtain the best possible performance from the unit.

CONTENTS

BASIC OPERATIONS .................................................... 5

RADIO OPERATIONS ...................................................6

Listening to the radio ............................................................................6

Searching a station automatically: Auto search ........................... 6

Searching a station manually:Manual search ............................. 7

Storing stations in memory ..................................................................8

FM station automatic preset: SSM...............................................8

Manual preset.............................................................................. 9

Tuning into a preset station ................................................................10

RDS OPERATIONS .....................................................11

What you can do with RDS EON...................................................... 11

Tracing the same program automatically

(Network-Tracking Reception) .............................................11

Using Standby Reception .......................................................... 13

Searching your favorite program (PTY Search) ......................... 15

Other convenient RDS functions and adjustments ......................... 17

Automatic selection of the station when

using the number buttons ....................................................17

Changing the display mode while listening to

an FM RDS station ............................................................. 17

Setting the TA volume level ........................................................17

Automatic clock adjustment........................................................18

CD OPERATIONS....................................................... 19

Playing a CD........................................................................................ 19

Playing a CD Text ............................................................................... 20

Locating a track or a particular portion on a CD ........................... 21

Selecting CD playback modes ........................................................... 22

Prohibiting CD ejection ......................................................................23

EN02-05.KD-LX3R[E]/f 99.3.9, 6:13 PM3

ENGLISH

SOUND ADJUSTMENTS ............................................. 24

Adjusting the sound ............................................................................ 24

Selecting preset sound modes ............................................................ 26

Storing your own sound adjustments ............................................... 27

OTHER MAIN FUNCTIONS .........................................28

Setting the clock ..................................................................................28

Controlling the volume automatically (Audio Cruise) .................... 29

Changing the general settings (PSM) ............................................... 31

Assigning names to the sources ......................................................... 35

Using the security lock........................................................................38

Registering the password.......................................................... 38

REMOTE OPERATIONS............................................... 41

Installing the battery ..........................................................................41

Using the remote controller................................................................42

CD CHANGER OPERATIONS ...................................... 43

Playing CDs ......................................................................................... 43

Selecting CD playback modes ........................................................... 45

EXTERNAL COMPONENT OPERATIONS ..................... 47

Playing an external component......................................................... 47

Using a subwoofer...............................................................................47

DAB TUNER OPERATIONS .........................................48

Tuning into an ensemble and one of the services............................. 48

Storing DAB services in memory ...................................................... 50

Tuning into a preset DAB service...................................................... 52

MAINTENANCE......................................................... 53

Handling CDs ...................................................................................... 53

TROUBLESHOOTING ................................................. 54

SPECIFICATIONS .......................................................55

How to use the number buttons:

After pressing MODE (while “MODE” remains on the display), the number buttons work as other

different function buttons.

To use these buttons as number buttons after pressing MODE,waitfor5secondswithoutpressing

any button so that “MODE” disappears from the display.

• Pressing MODE again also erases “MODE” from the display.

EN02-05.KD-LX3R[E]/f 99.3.9, 6:13 PM4

ENGLISH

BASIC OPERATIONS

Note:

When you use this unit for the

firsttime,setthebuilt-inclock

correctly, see page 28.

1 2

Turn on the power.

The display illuminates and the control panel comes out.

Select the source.

Each time you press the button, the source changes as described to

the left:

To operate the tuner, see pages 6 – 18.

To operate the CD player, see pages 19 – 23.

To operate the CD changer, see pages 43 – 46.

To operate the external component connected to the LINE IN plugs,

see page 47.

To operate the DAB tuner, see pages 48 – 52.

Notes:

* If a CD is not in the loading slot, you cannot select CD as the source to play.

** Without connecting the CD changer or the DAB tuner, you cannot select it as the source to

play.

Adjust the volume.

Adjust the sound as you want (see pages 24 – 27).

To drop the volume in a moment

Press FUNC (function) for more than 1 second while listening to any source. “ATT” starts

flashing on the display, and the volume level will drop in a moment.

To resume the previous volume level, press the button for more than 1 second again.

To turn off the power

Press OFF/ 0until “SEEYOU” appears on the display.

Volume level meter

changer

LINE

DAB

EN02-05.KD-LX3R[E]/f 99.3.9, 6:13 PM5

ENGLISH

RADIO OPERATIONS

Listening to the radio

You can use either automatic searching or manual searching to tune into a particular station.

Searching a station automatically: Auto search

1 2 3

Select the band.

1Press FUNC (Function) to select “FM” or

“AM.”

2Press MODE.

“MODE” appears on the lower part of the

display.

3Press BAND to select the band.

Each time you press the button, the band

changes as shown to the left:

Start searching a station.

When a station is received, searching stops.

To stop searching before a station is received, press the same button you have pressed

for searching.

To tune in FM stations only with strong signals

This function works only while searching FM stations, including SSM preset (see page 8).

1Press MODE.

“MODE” appears on the lower part of the display.

2Press INT/LO (Intro/Local), while“MODE”is still on the display, so that the LOCAL indicator

lights up on the display.

Each time you press the button, the LOCAL indicator lights up and goes off alternately.

INT/LO MODE

Selected band (then clock

time: see page 33) appears. Level meter (see page 33)

Note:

This receiver has three FM bands

(FM1,FM2, FM3).You can use any

one of them to listen to an FM

broadcast.

FM1 FM2 AMFM3

To search stations of

higher frequencies

To search stations of

lower frequencies

EN06-10.KD-LX3R[E]/f 99.3.9, 6:14 PM6

ENGLISH

Searching a station manually: Manual search

2, 3

Select the band.

1Press FUNC (Function) to select “FM” or

“AM.”

2Press MODE.

“MODE” appears on the lower part of the

display.

3Press BAND to select the band.

Each time you press the button, the band

changes as shown to the left:

Press and hold ¢or 4until “M” (manual)

starts flashing on the display.

Tuneintoastationyou wantwhile“M”

is flashing.

Notes:

• If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9

kHz intervals for AM–MW/LW) until you release the button.

• After 5 seconds you release the button, “M” stops flashing on the display and you cannot select

a station manually any more.

When an FM stereo broadcast is hard to receive:

1Press MODE while listening to an FM stereo broadcast (the ST indicator lights up while

receiving an FM stereo broadcast).

“MODE” appears on the lower part of the display.

2Press MONO (monaural), while “MODE” is still on the display, so that the MO indicator

lights up on the display.

The sound you hear becomes monaural but reception will be improved (the ST indicator

goes off).

Each time you press the button, the MO indicator lights up and goes off alternately.

123

FM1 FM2 AMFM3

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to

an FM broadcast.

To tune into stations

of higher frequencies

To tune into stations

of lower frequencies

MODE

MONO

EN06-10.KD-LX3R[E]/f 99.3.9, 6:14 PM7

ENGLISH

Storing stations in memory

You can use one of the following two methods to store broadcasting stations in memory.

• Automatic preset of FM stations:SSM (Strong-station Sequential Memory)

• Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3).

Select the FM band.

1Press FUNC (Function) to select “FM” or

“AM.”

2Press MODE.

“MODE” appears on the lower part of the

display.

3PressBAND toselecttheFMband number

(FM1, FM2, or FM3).

Press and hold both buttons for more than

2 seconds.

Local FM stations with the strongest signals are searched and stored automatically in the

band number you have selected (FM1, FM2 or FM3).These stations are preset in the number

buttons — No. 1 (lowest frequency) to No. 6 (highest frequency).

When automatic preset is over, the station stored in number button 1 will be automatically

tuned in.

123

FM1 FM2 AMFM3

“SSM” appears, then disappears when automatic

preset is over.

EN06-10.KD-LX3R[E]/f 99.3.9, 6:14 PM8

ENGLISH

Manual preset

You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.

EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band

1 2 3

FM band number and “MEMO”

appears alternately for a while.

Select the FM1 band.

1Press FUNC (Function) to select “FM” or

“AM.”

2Press MODE.

3Press BAND to select “FM1.”

Tune into a station of 88.3 MHz.

See page 6 to tune into a station.

Press and hold the number button (in this example, 1)

for more than 2 seconds.

Repeat the above procedure to store other stations into other

preset numbers.

Notes:

• A previously preset station is erased when a new station is stored in the same preset number.

• Preset stations are erased when the power supply to the memory circuit is interrupted (for example,

during battery replacement). If this occurs, preset the stations again.

EN06-10.KD-LX3R[E]/f 99.3.9, 6:14 PM9

ENGLISH

Tuning into a preset station

You can easily tune into a preset station.

Remember that you must store stations first. If you have not stored them yet, see pages 8

and 9.

Select the band.

1Press FUNC (Function) to select “FM” or

“AM.”

2Press MODE.

“MODE” appears on the lower part of the

display.

3Press BAND to select the band.

Each time you press the button, the band

changes as shown to the left:

Select the number (1 – 6) for the preset station you want.

1 2 3

FM1 FM2 AMFM3

21-

EN06-10.KD-LX3R[E]/f 99.3.9, 6:14 PM10

Andere Handbücher für KD-LX3R

Inhaltsverzeichnis

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung