JVC KW-XC888 Bedienungsanleitung

CD/CASSETTE RECEIVER KW-XC888

INSTRUKSI

LVT1139 - 002A

(UN)

INSTRUCTIONS

ENGLISH

INDONESIA

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside unit; leave all

servicing to qualified service personnel.

3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid

direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

CAUTION on Volume Setting

CDs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for

example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the

volume before playing a CD and adjust it as required during playback.

How to reset your unit

Press the reset button on the front panel using

a ball-point pen or similar tool.

Note:

Your preset adjustments—such as preset channels

or sound adjustments—will be erased.

ENGLISH

CONTENTS

How to reset your unit .................................... 2

LOCATION OF THE BUTTONS ............ 4

BASIC OPERATIONS ....................... 5

RADIO OPERATIONS ...................... 6

Listening to the radio ................................. 6

Storing stations in memory ....................... 7

Tuning in to a preset station ...................... 8

Selecting FM reception mode ................... 8

CD OPERATIONS ........................... 9

Playing a CD ............................................. 9

Locating a track or a particular portion

on a CD ................................................. 10

Selecting CD playback modes .................. 10

TAPE OPERATIONS ........................ 11

Listening to a tape ..................................... 11

Finding the beginning of a tune ................. 12

Other convenient tape functions ............... 13

SOUND ADJUSTMENTS................... 14

CD CHANGER OPERATIONS .............. 15

About MP3 discs ....................................... 15

Connecting the CD changer ...................... 16

Playing discs ............................................. 16

Locating a track or a particular portion

on a disc ................................................ 17

Locating a disc in the magazine ................ 17

Locating a folder on a disc ........................ 18

Selecting the playback modes .................. 18

ADDITIONAL INFORMATION ............. 19

Handling cassettes .................................... 19

Handling discs ........................................... 20

TROUBLESHOOTING ...................... 21

SPECIFICATIONS........................... 23

BEFORE USE

*For safety....

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

*Temperature inside the car....

If you have parked the car for a long time in hot or

cold weather, wait until the temperature in the car

becomes normal before operating the unit.

ENGLISH

LOCATION OF THE BUTTONS

1Display window

2CD loading slot

ATT

(standby/on/attenuator) button

4LOUD (loudness) button

5MONO (monaural) /SSM button

6Source buttons

• CD/CD-CH button

• FM/AM button

• TAPE (PROG) button

7Number buttons

• B.SKIP/RND (blank skip/random) button

• RPT (repeat) button

• DISC button

•FOLDER button

• FOLDER button

8Cassette compartment

9CD 0(eject) button

p¢button

q4button

wSEL (select) button

eTape 0(eject) button

rControl dial

tReset button

Display window

ySource indicators

CD, CD-CH (CD-changer), TAPE, FM1, FM2,

FM3, AM

uMP3 indicator

iRPT (repeat) indicator

oRND (random) indicator

;Tuner reception indicators

MO (monaural), ST (stereo)

aB.SKIP (blank skip) indicator

sLOUD (loudness) indicator

dATT (attenuator) indicator

fCD-in indicator

gMain display

ENGLISH

Control Panel

Turn on the power.

Note on One-Touch Operation:

When you select a source in step 2 below, the

power automatically comes on. You do not have

to press this button to turn on the power.

Select the source.

• Each time you press CD/

CD-CH, the source alternates

between CD* and CD-

changer**.

• Each time you press FM/AM, the

band changes to FM (FM1,

FM2, FM3) and AM.

• Press TAPE (PROG), so that the

source is selected as TAPE***.

*If a disc is not in the loading slot, you cannot

select CD as the source to play. (“NO DISC” will

appear on the display.)

** Without connecting the CD changer, you cannot

select it as the source to play.

*** If a cassette is not in the cassette compartment,

you cannot select TAPE as the source to play.

(“NO TAPE” will appear on the display.)

To operate the tuner, see pages 6 – 8.

To play the CD, see pages 9 and 10.

To operate the tape deck, see pages 11 – 13.

To operate the CD changer, see pages 15 – 18.

Adjust the volume.

Adjust the sound as you want

(see page 14).

To drop the volume immediately

Press

ATT

briefly while listening to any

source. The ATT indicator starts flashing on the

display, and the volume level will drop

immediately.

To resume the previous volume level, press

the button briefly again.

To turn off the power

Press

ATT

for more than 1 second.

•If you turn off the power while listening to a

CD, the CD play will start from where playback

has been stopped previously, next time you

turn on the power.

•If you turn off the ignition key without

turning off this unit, the unit will

automatically turn on when you turn on the

ignition key next time. If the last selected

source is ready for playback (ex. a CD or a

tape is in the unit), playback starts

automatically.

BASIC OPERATIONS

To increase the volume

To decrease the volume

Volume level

ENGLISH

RADIO OPERATIONS

Listening to the radio

You can use either automatic searching or manual

searching to tune in to a particular station.

Searching for a station automatically:

Auto search

Select the band (FM1, FM2, FM3 or

AM).

Note:

This receiver has three FM bands (FM1, FM2,

and FM3). You can use any one of them to listen

to an FM broadcast.

Start searching for a station.

To search for stations of higher

frequencies, press ¢briefly.

To search for stations of lower

frequencies, press 4briefly.

When a station is received, searching stops.

ST indicator lights up when receiving an FM

broadcast in stereo.

To stop searching before a station is received,

press the same button you have pressed for

searching.

Searching for a station manually:

Manual search

Select the band (FM1, FM2, FM3, or

AM).

Press and hold ¢or 4

until “M” (manual) starts flashing on

the display.

Tune in to a station you want while

“M” is flashing.

To tune in to stations of higher

frequencies

To tune in to stations of lower

frequencies

Selected band appears.

ENGLISH

Notes:

• If you release your finger from the button, the

manual search will automatically turn off after

5 seconds.

• If you hold down the button, the frequency keeps

changing (in 50 kHz intervals for FM and 9 kHz for

AM) until you release the button.

Storing stations in memory

You can use one of the following methods to store

broadcasting stations in memory.

• Automatic preset: SSM (Strong-station

Sequential Memory)

• Manual preset

Automatic preset: SSM

You can preset up to 6 local stations in each FM

band (FM1, FM2, and FM3).

Select the band (FM1, FM2, or FM3).

Press MONO/SSM for more than 1

second.

“SSM” appears, then disappears when

automatic preset is over.

Local stations with the strongest signals are

searched for and stored automatically in the

band you have selected (FM1, FM2, and FM3).

These stations are preset in the number

buttons—No. 1 (lowest frequency) to No. 6

(highest frequency).

When automatic preset is over, the station stored

in the number 1 button will be automatically

tuned in.

Manual preset

You can preset up to 6 stations in each band

(FM1, FM2, FM3, and AM) manually.

Ex.: Storing an FM station of 92.5 MHz into the

preset channel number 1 of the FM1 band

Select the FM1 band.

Tune in to a station (in this example,

of 92.5 MHz).

To tune in to stations of higher

frequencies

To tune in to stations of lower

frequencies

Press and hold the number button

(in this example, 1) for more than

2 seconds.

Preset number flashes for a while.

CONTINUED ON THE NEXT PAGE

ENGLISH

Selecting FM reception mode

When an FM stereo broadcast is hard to

receive:

Press MONO/SSM briefly so that

MO indicator lights up on the

display (“MONO” appears on the

display).

Each time you press the button,

the MO indicator goes on and off

alternately.

When the MO indicator is lit, the sound you

hear becomes monaural but reception will be

improved.

MO (monaural) indicator

Repeat the above procedure to store

other stations into other preset

numbers.

Notes:

• A previously preset station is erased when a new

station is stored in the same preset number.

• Preset stations are erased when power supply to the

memory circuit is interrupted ( for example, during

battery replacement). If this occurs, preset the

stations again.

Tuning in to a preset station

You can easily tune in to a preset station.

Remember that you must store stations first. If you

have not stored them yet, see page 7.

Select the band (FM1, FM2, FM3, or

AM) you want.

Select the number (1 – 6) for the

preset station you want.

EX.: When you press number button 1

Preset number

ENGLISH

Playing a CD

Insert a CD into the loading slot.

The unit turns on, draws

in the CD and starts

playback automatically

(the CD-in indicator and

“LOADING” flash on the

display).

CD OPERATIONS

Note on One-Touch Operation:

When a CD is already in the loading slot, pressing

CD/CD-CH turns on the unit and starts playback

automatically.

To stop play and eject the CD

Press CD 0.

CD play stops and the CD

automatically ejects from the loading

slot (the CD-in indicator and “EJECT”

flash on the display). The source

changes to the last selected source.

Notes:

• When a CD is inserted upside down, the CD

automatically ejects.

• If the ejected disc is not removed for about

15 seconds, the disc is automatically inserted again

into the loading slot to protect it from dust. (CD play

will not start this time.)

• You can eject the CD even when the ignition key is

turned off. (However, you cannot load the CD into

the loading slot when the ignition key is turned off.)

• If you change the source, CD play also stops (without

ejecting the disc).

Next time you select “CD” as the source, CD play

starts from where playback had been stopped

previously.

CD-in indicator

Total track

number of the

inserted disc

Total playing

time of the

inserted disc

Current track

number

Elapsed playing

time

ENGLISH

Locating a track or a

particular portion on a CD

To fast-forward or reverse the track

Press and hold ¢while

playing a CD, to fast-forward the

track.

Press and hold 4while

playing a CD, to reverse the

track.

To go to the next tracks or the previous

track

Press ¢briefly while

playing a CD, to go ahead to the

beginning of the next track.

Each time you press the button

consecutively, the beginning of

the next track is located and

playback.

Press 4briefly while

playing a CD, to go back to the

beginning of the current track.

Each time you press the button

consecutively, the beginning of

the previous track is located and

playback.

Selecting CD playback modes

To play back tracks at random

(Random Play)

You can play back all tracks on the CD at

random.

Press B.SKIP/RND so that

“DISC RND” appears on the

display.

Each time you press the button,

CD random play mode turns on

and off alternately.

When CD random mode is turned on, the

RND indicator lights up on the display and a

randomly selected track starts playing.

To play back tracks repeatedly

(Repeat Play)

You can play back the current track repeatedly.

Press RPT so that “TRK RPT”

appears on the display.

Each time you press the button,

CD repeat play mode turns on

and off alternately.

When CD repeat mode is turned on, the

RPT indicator lights up on the display.

RND indicator

RPT indicator

ENGLISH

Andere Handbücher für KW-XC888

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere JVC Autoempfänger Handbücher

JVC

JVC KD-LX100 Bedienungsanleitung

JVC

JVC KD-S26 Leitfaden

JVC

JVC KW-XR811 Bedienungsanleitung

JVC

JVC KW-AVX838 Bedienungsanleitung

JVC

JVC KD-LX50 Bedienungsanleitung

JVC

JVC KD-S821R Bedienungsanleitung

JVC

JVC EXAD KD-LHX601 Bedienungsanleitung

JVC

JVC KD-AR300 Bedienungsanleitung

JVC

JVC KW-XR816 Bedienungsanleitung

JVC

JVC KD-DV5202 Leitfaden

JVC

JVC EXAD KW-AVX810 Leitfaden

JVC

JVC KD-T905BTS Bedienungsanleitung

JVC

JVC G120R - Radio / CD Player Bedienungsanleitung

JVC

JVC KD-DV4402 Bedienungsanleitung

JVC

JVC KW-AVX726 Bedienungsanleitung

JVC

JVC KW-X850BTS Bedienungsanleitung

JVC

JVC KD-S6060 Bedienungsanleitung

JVC

JVC KD-G285 Bedienungsanleitung

JVC

JVC KD-G501 Bedienungsanleitung

JVC

JVC CD Receiver KD-G632 Bedienungsanleitung

JVC

JVC KD-LH1101 Bedienungsanleitung

JVC

JVC KD-G611 Bedienungsanleitung

JVC

JVC KD-AR3000 Bedienungsanleitung

JVC

JVC KD-SX883 Bedienungsanleitung

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung