Keller LEO 5 Bedienungsanleitung
MANUAL
LEO 5
Keller AG für Druckmesstechnik
www.keller-druck.com
Index
1
General information ..................................................................3
2
Operating instructions ...............................................................3
2.1
Touch Display..................................................................3
2.2
Manage the device with touch pannels............................4
2.2.1
Example: Setting the peak mode................................5
2.2.2
Handling example: How to stop the peak mode..........5
2.3
Menu structure.................................................................6
2.3.1
Main menu..................................................................6
2.3.2
Sub menu ...................................................................7
2.3.3
Sub menu settings ....................................................10
2.4
USB connection.............................................................12
2.5
Installing the USB – driver LEO 5..................................13
2.6
Optional – establish a Bluetooth connection..................17
2.7
Charge accumulator ......................................................20
3
Disposal ..................................................................................20
4
General Safety Instructions.....................................................21
www.keller-druck.com
- 3 -
1 General information
The LEO 5 is powered by accumulator and will be
charged when connected to USB Port. As the
accumulator is fix built in the device it cannot be
replaced.
2 Operating instructions
2.1 Touch Display
LEO 5 has two keys integrated into the display.
A key press is initiated by touching the key field
“SELECT” or “ENTER” and activated by release the
key for at least 0.5 second.
(release your finger from the display after touching,
for at least 1cm away from the display field)
Turn-on:
Touching the “SELECT” key turns on the display.
The device displays “PRESS ENTER”.
Touch “ENTER” to start the manometer.
www.keller-druck.com
- 4 -
2.2 Manage the device with touch
pannels
choose different functions
press „SELECT“
activate commands or functions
press “ENTER”
Remark: The display automatically switches back to
the main display 10 seconds after the last key
touch.
www.keller-druck.com
- 5 -
2.2.1 Example: Setting the peak mode
Turn on the instrument by pressing the
SELECT key followed by pressing the
ENTER key
Press the “SELECT”–key 3 times: The
lower display part will show “MENU”
Press “ENTER”
Press “SELECT” ”–key 3 times: The lower
display part will show “PEAK” and
“START”
Press “ENTER”: In the main display, the
segment “PEAK” indicates that the peak
mode is on.
2.2.2 Handling example: How to stop the
peak mode
Press “SELECT”–key 3 times: The lower
display part will show “MENU”
Press “ENTER”
Press “SELECT”–key 3 times: The lower
display part will show “PEAK” and “STOP”
Press “ENTER”
www.keller-druck.com
- 6 -
2.3 Menu structure
2.3.1 Main menu
Main Display
Reset
Min.-/Max.-value are set to
the actual pressure
OFF
Turns off the instrument
and ends an active record
Menu
Releases the sub menu
functions
www.keller-druck.com
- 7 -
2.3.2 Sub menu
Rec On
Starts a record with the
actual configuration
(set via the software)
Rec OFF
Ends an active record
Peak START
PEAK off: Normal measuring mode with
2 measurements per second.
PEAK on: Fast measuring mode with
5000 measurements per second
RF BT On/OFF
Switch the LEO 5 Bluetooth modul
“On” or “OFF” to communicate
wireless
www.keller-druck.com
- 8 -
Zero SET
Sets a new pressure
zero reference
Zero RESET
Sets the pressure zero to
factory setting
UNIT
Unit selection
CONT
Activates or deactivates
the automatic turn off function
Display
Main display selection
www.keller-druck.com
- 9 -
BACKL
Backlight setting
RESL
Choose resolution
ACCU
Accumulator information
and charge status
EXIT
Each sub menu can be left
by pressing “ENTER” while
“EXIT” is displayed.
The display will switch back
to the sub menu
www.keller-druck.com
- 10 -
2.3.3 Sub menu settings
Unit selection Continuous
mode
Display selection
↓
↓
↓
bar, mbar, hPa,
kPa, MPa, PSI,
kp/cm
2
, cmH
2
O,
mH
2
O, inH
2
O,
ftH
2
O, mmHg, inHg
CONT on:
Deactivates the
automatic turn-off
function.
CONT off:
Activates the
automatic turn off
function (the
instrument turns off
15 minutes after the
last key operation)
select the lower
display option.
Select between:
temperature display
or
min/max pressure
value
Andere Handbücher für LEO 5
3
Inhaltsverzeichnis
Andere Keller Messgerät Handbücher
Keller
Keller CellaTemp PX 41 Bedienungsanleitung
Keller
Keller CellaTemp PKL63 Bedienungsanleitung
Keller
Keller ITS CellaPort PT 11 Series Bedienungsanleitung
Keller
Keller LEO 1 Bedienungsanleitung
Keller
Keller LEO 1 Bedienungsanleitung
Keller
Keller LEO 1 Ei Bedienungsanleitung
Keller
Keller CellaTemp PR11 Bedienungsanleitung
Keller
Keller CellaCast PA 80-K002 Bedienungsanleitung
Keller
Keller Lex 1 Bedienungsanleitung
Keller
Keller CellaTemp PK Series Bedienungsanleitung
Keller
Keller dV-2 PS Bedienungsanleitung
Keller
Keller CellaTemp PX 21 Bedienungsanleitung
Keller
Keller CellaTemp PA 4 Series Bedienungsanleitung
Keller
Keller CellaTemp PX1 Series Bedienungsanleitung
Keller
Keller ITS CellaCast PX 8 Series Bedienungsanleitung
Keller
Keller LEX 1 Ei Bedienungsanleitung
Keller
Keller CellaTemp PA 1 Series Bedienungsanleitung
Keller
Keller ECO 1 Bedienungsanleitung
Keller
Keller ECO 2 Bedienungsanleitung
Keller
Keller LEO-Record Bedienungsanleitung
