Kenwood PKT-23 Bedienungsanleitung

INSTRUCTION MANUAL

09 08 07 06 05 04 03 02 01 00

UHF FM TRANSCEIVER

PKT-23

THANK YOU

We are grateful for your purchase of this KENWOOD product

and welcome you to the Business Radio Service (BRS).

Your KENWOOD 2-way Business Radio is called a

“transceiver”, meaning “transmitter & receiver”. We believe

this easy-to-use transceiver will provide you with dependable

and reliable communications. This KENWOOD transceiver is a

precision device. Treat it with care, and you will enjoy years of

reliable operation.

FEATURES

• 4channelswith99UHFoperatingfrequencies.Eachchannel

can be set up with a QT tone or DQT code allowing you to

ignore unwanted calls.

• Handsfreeoperationwhenusinganoptionalheadset.

• Voiceannouncementletsyouknowwhichchannelyouhave

selected and which settings you have made when reassigning

keyfunctionsandchannelsettings.

OPERATING CONDITIONS

Condition Transmission Range

Open locations

(no obstructions) Upto5miles(8km)

In steel/ concrete

reinforced buildings Upto225,000squarefeet(20,900m2)

In high rises Up to 17 ﬂoors

Note: The listed ranges are based on ﬁeld testing and may vary

with your operating conditions and individual transceiver.

FCC LICENSE INFORMATION

Your KENWOOD transceiver operates on communications

frequencieswhicharesubjecttoFCC(Federal

Communications Commission) Rules & Regulations. FCC

RulesrequirethatalloperatorsusingPrivateLandMobile

radiofrequenciesobtainaradiolicensebeforeoperatingtheir

equipment.ApplicationforlicensemustbemadeonFCCform

601, schedules D and H, and Remittance form 159.

FAX: Forms can be obtained by fax from the FCC Fax-On-

Demand system. Call 1-202-418-0177 from your fax machine

andrequestdocumentnumber000601fortheform,schedules,

and instructions.

MAIL: Forms can be ordered by telephone, and will be sent to

you by ﬁrst class mail. Call the FCC Forms Hotline at

1-800-418-FORM (1-800-418-3676).

INTERNET: Form 601 and instructions can be downloaded

from the FCC Forms website at

http://www.fcc.gov/formpage.html

Before ﬁlling out your Form 601 application Technical Data

section,youmustdecideonwhichfrequenciesyouwilloperate.

Seethefrequencychartsonpages13and14.

QUESTIONS?CalltheFCCforlicenseapplicationquestionsat

1-888-CALL-FCC (1-888-225-5322).

iii

One or more of the following statements may be

applicable:

FCC WARNING

 Thisequipmentgeneratesorusesradiofrequencyenergy.Changesor

modicationstothisequipmentmaycauseharmfulinterferenceunless

the modiﬁcations are expressly approved in the instruction manual.

Theusercouldlosetheauthoritytooperatethisequipmentifan

unauthorized change or modiﬁcation is made.

INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY

THE FCC

 Thisequipmenthasbeentestedandfoundtocomplywiththelimitsfor

a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation.

 Thisequipmentgenerates,usesandcangenerateradiofrequency

energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However,

there is no guarantee that the interference will not occur in a particular

installation.Ifthisequipmentdoescauseharmfulinterferencetoradioor

televisionreception,whichcanbedeterminedbyturningtheequipment

off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweentheequipmentandreceiver.

• Connecttheequipmenttoanoutletonacircuitdifferentfromthat

to which the receiver is connected.

• Consultthedealerfortechnicalassistance.

ATTENTION:

The RBRC Recycle seal found on KENWOOD lithium-

ion(Li-ion)batterypacksindicatesKENWOOD’s

voluntary participation in an industry program to collect

and recycle Li-ion batteries after their operating life

has expired.The RBRC program is an alternative to

disposing Li-ion batteries with your regular refuse or in

municipal waste streams, which is illegal in some areas.

For information on Li-ion battery recycling in your area, call (toll free)

1-800-8-BATTERY (1-800-822-8837).

KENWOOD’s involvement in this program is part of our commitment to

preserve our environment and conserve our natural resources.

NOTICES TO THE USER

◆Government law prohibits the operation of unlicensed radio

transmitters within the territories under government control.

◆Illegal operation is punishable by ﬁne and/or imprisonment.

◆ Referservicetoqualiedtechniciansonly.

Safety: It is important that the operator is aware of, and

understands, hazards common to the operation of any

transceiver.

PRECAUTIONS

• Donotchargethetransceiverandbatterypackwhentheyarewet.

• Ensurethattherearenometallicitemslocatedbetweenthe

transceiverandthebatterypack.

• DonotuseoptionsnotspeciedbyKENWOOD.

• Ifanytransceiverpartisdamaged,donottouchthedamaged

parts.

• Ifaheadsetorheadphoneisconnectedtothetransceiver,reduce

the transceiver volume. Pay attention to the volume level when

turningthesquelchoff.

• Donotplacethecableoftheclipmicrophonewithearphone/

hangeraroundyourneckwhilenearmachinerythatmaycatchthe

cable.

• Donotplacethetransceiveronunstablesurfaces.Ifthetransceiver

switches OFF/ON as a result of falling or hard impact, the volume

and channel conﬁgurations may reset.

• Ensurethattheendoftheantennadoesnottouchyoureyes.

• Donotimmersethetransceiverinwater.

• Alwaysswitchthetransceiverpoweroffbeforeinstallingoptional

accessories.

• ThechargeristhedevicethatdisconnectstheunitfromtheAC

mains line. The AC plug should be readily accessible.

• Donotmodifythetransceiverforanyreason.

• Donotplacethetransceiveronornearairbagequipmentwhilethe

vehicle is running. When the airbag inﬂates, the transceiver may be

ejectedandstrikethedriverorpassengers.

• Donottransmitwhiletouchingtheantennaterminalorifanymetallic

parts are exposed from the antenna covering. Transmitting at such a

timemayresultinahigh-frequencyburn.

• Ifanabnormalodororsmokeisdetectedcomingfromthetransceiver,

switchthetransceiverpoweroffimmediately,removethebatterypack

from the transceiver, and contact your KENWOOD dealer.

• Useofthetransceiverwhileyouaredrivingmaybeagainsttrafclaws.

Pleasecheckandobservethevehicleregulationsinyourarea.

• Donotexposethetransceivertoextremelyhotorcoldconditions.

• Donotcarrythebatterypack(orbatterycase)withmetalobjects,as

they may short the battery terminals.

• Dangerofexplosionifthebatteryisincorrectlyreplaced;replace

only with the same type.

• Whenoperatingthetransceiverinareaswheretheairisdry,itis

easy to build up an electric charge (static electricity). When using

an earphone accessory in such conditions, it is possible for the

transceivertosendanelectricshockthroughtheearphoneandto

your ear. Do not use an earphone/microphone accessory in areas

where static electricity can be easily generated.

• Whenattachingacommercialstraptothetransceiver,ensurethat

the strap is durable. In addition, do not swing the transceiver around

bythestrap;youmayinadvertentlystrikeandinjureanotherperson

with the transceiver.

Turn the transceiver power off in the following locations:

• Inexplosiveatmospheres(inammablegas,dustparticles,metallic

powders, grain powders, etc.).

• Whiletakingonfuelorwhileparkedatgasolineservicestations.

• Nearexplosivesorblastingsites.

• Inaircraft.(Anyuseofthetransceivermustfollowtheinstructions

and regulations provided by the airline crew.)

• Whererestrictionsorwarningsarepostedregardingtheuseofradio

devices, including but not limited to medical facilities.

• Nearpersonsusingpacemakers.

Information concerning the battery pack:

Thebatterypackincludesammableobjectssuchasorganic

solvent. Mishandling may cause the battery to rupture

producing ﬂames or extreme heat, deteriorate, or cause other

forms of damage to the battery. Please observe the following

prohibitive matters.

• Do not disassemble or reconstruct the battery!

 Thebatterypackhasasafetyfunctionandprotectioncircuitto

avoid danger. If they suffer serious damage, the battery may

generateheatorsmoke,rupture,orburstintoame.

• Do not short-circuit the battery!

Do not join the + and – terminals using any form of metal (such

asapapercliporwire).Donotcarryorstorethebatterypackin

containersholdingmetalobjects(suchaswires,chain-necklacesor

hairpins).Ifthebatterypackisshort-circuited,excessivecurrentwill

owandthebatterymaygenerateheatorsmoke,rupture,orburst

into ﬂame. It will also cause metal objects to heat up.

• Do not incinerate or apply heat to the battery!

If the insulator is melted, the gas release vent or safety function is

damaged, or the electrolyte is ignited, the battery may generate

heatorsmoke,rupture,orburstintoame.

• Do not leave the battery near ﬁre, stoves, or other heat

generators (areas reaching over 60°C/ 140°F)!

If the polymer separator is melted due to high temperature, an

internal short-circuit may occur in the individual cells and the

batterymaygenerateheatorsmoke,rupture,orburstintoame.

• Do not immerse the battery in water or get it wet by other

means!

If the battery’s protection circuit is damaged, the battery may

charge at extreme current (or voltage) and an abnormal chemical

reactionmayoccur.Thebatterymaygenerateheatorsmoke,

rupture, or burst into ﬂame.

• Do not charge the battery near ﬁre or under direct sunlight!

If the battery’s protection circuit is damaged, the battery may

charge at extreme current (or voltage) and an abnormal chemical

reactionmayoccur.Thebatterymaygenerateheatorsmoke,

rupture, or burst into ﬂame.

vii

• Use only the speciﬁed charger and observe charging

requirements!

If the battery is charged in unspeciﬁed conditions (under high

temperature over the regulated value, excessive high voltage or

current over regulated value, or with a remodeled charger), it may

overcharge or an abnormal chemical reaction may occur. The

batterymaygenerateheatorsmoke,rupture,orburstintoame.

• Do not pierce the battery with any object, strike it with an

instrument, or step on it!

 Thismaybreakordeformthebattery,causingashort-circuit.The

batterymaygenerateheatorsmoke,rupture,orburstintoame.

• Do not jar or throw the battery!

 Animpactmaycausethebatterytoleak,generateheatorsmoke,

rupture, and/or burst into ﬂame. If the battery’s protection circuit

is damaged, the battery may charge at an abnormal current (or

voltage), and an abnormal chemical reaction may occur.The

batterymaygenerateheatorsmoke,rupture,orburstintoame.

• Do not use the battery pack if it is damaged in any way!

 Thebatterymaygenerateheatorsmoke,rupture,orburstinto

ﬂame.

• Do not solder directly onto the battery!

If the insulator is melted or the gas release vent or safety function

isdamaged,thebatterymaygenerateheatorsmoke,rupture,or

burst into ﬂame.

• Do not reverse the battery polarity (and terminals)!

When charging a reversed battery, an abnormal chemical reaction

may occur. In some cases, an unexpected large amount of current

may ﬂow upon discharging. The battery may generate heat or

smoke,rupture,orburstintoame.

• Do not reverse-charge or reverse-connect the battery!

 Thebatterypackhaspositiveandnegativepoles.Ifthebattery

packdoesnotsmoothlyconnectwithachargeroroperating

equipment,donotforceit;checkthepolarityofthebattery.Ifthe

batterypackisreverse-connectedtothecharger,itwillbereverse-

charged and an abnormal chemical reaction may occur. The

batterymaygenerateheatorsmoke,rupture,orburstintoame.

viii

• Do not touch a ruptured and leaking battery!

 Iftheelectrolyteliquidfromthebatterygetsintoyoureyes,wash

your eyes with fresh water as soon as possible, without rubbing

your eyes. Go to the hospital immediately. If left untreated, it may

cause eye problems.

• Do not charge the battery for longer than the speciﬁed time!

 Ifthebatterypackhasnotnishedchargingevenafterthe

regulated time has passed, stop it. The battery may generate heat

orsmoke,rupture,orburstintoame.

• Do not place the battery pack into a microwave or high

pressure container!

 Thebatterymaygenerateheatorsmoke,rupture,orburstinto

ﬂame.

• Keep ruptured and leaking battery packs away from ﬁre!

 Ifthebatterypackisleaking(orthebatteryemitsabadodor),

immediatelyremoveitfromammableareas.Electrolyteleaking

from the battery can easily catch on ﬁre and may cause the

batterytogeneratesmokeorburstintoame.

• Do not use an abnormal battery!

 Ifthebatterypackemitsabadodor,appearstohavedifferent

coloring, is deformed, or seems abnormal for any other reason,

removeitfromthechargeroroperatingequipmentanddonotuse

it.Thebatterymaygenerateheatorsmoke,rupture,orburstinto

ﬂame.

Firmware Copyrights

The title to and ownership of copyrights for ﬁrmware embedded in

KENWOOD product memories are reserved for JVC KENWOOD

Corporation.

CONTENTS

UNPACKING AND CHECKING EQUIPMENT.......................... 1

PREPARATION .......................................................... 2

ORIENTATION ........................................................... 7

BASIC OPERATIONS ................................................... 9

VOICE OPERATED TRANSMISSION (VOX) ......................... 11

CHANNEL SETUP MODE.............................................. 12

KEY ASSIGNMENT MODE ............................................18

TROUBLESHOOTING GUIDE .........................................21

ALL RESET MODE.....................................................22

UNPACKING AND CHECKING EQUIPMENT

Carefullyunpackthetransceiver.Ifanyoftheitemslisted

below are missing or damaged, ﬁle a claim with the carrier

immediately.

SUPPLIED ACCESSORIES

• Batterycharger(KSC-44CR)/ACadapter(KSC-44SL) .........1

• Li-ionbatterypack(KNB-71L) ................................................1

• Beltclip(KBH-20)...................................................................1

• Screw(M3 x 6 mm with washer)...............................................2

• Warrantycard .........................................................................1

• Instructionmanual ..................................................................1

Note: Refer to “PREPARATION” for accessory installation

instructions.

Andere Handbücher für PKT-23

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kenwood Transceiver Handbücher

Kenwood

Kenwood TH-25A Series Bedienungsanleitung

Kenwood

Kenwood Nexedge NX-230EX Bedienungsanleitung

Kenwood

Kenwood NX-240V16P ProTalk Digital Bedienungsanleitung

Kenwood

Kenwood TK-3130 - ProTalk XLS UHF Bedienungsanleitung

Kenwood

Kenwood TS-440S Bedienungsanleitung

Kenwood

Kenwood NEXEDGE NX-200 Bedienungsanleitung

Kenwood

Kenwood TK-2160 Bedienungsanleitung

Kenwood

Kenwood TM-201A Bedienungsanleitung

Kenwood

Kenwood Trio TS-520 Bedienungsanleitung

Kenwood

Kenwood TK-2107 Bedienungsanleitung

Kenwood

Kenwood TS-430S Bedienungsanleitung

Kenwood

Kenwood TM-421A Bedienungsanleitung

Kenwood

Kenwood TS-700 Bedienungsanleitung

Kenwood

Kenwood NEXEDGE NX-411 Bedienungsanleitung

Kenwood

Kenwood TH-28E Bedienungsanleitung

Kenwood

Kenwood TS-820 Bedienungsanleitung

Kenwood

Kenwood TK-2302 Bedienungsanleitung

Kenwood

Kenwood TK-7180 Bedienungsanleitung

Kenwood

Kenwood TK-D740H Bedienungsanleitung

Kenwood

Kenwood TK-760G series Bedienungsanleitung

Kenwood

Kenwood Nexedge NX-5300 Bedienungsanleitung

Kenwood

Kenwood TK-3312 Bedienungsanleitung

Kenwood

Kenwood TS-670 Bedienungsanleitung

Kenwood

Kenwood TM-3530A Bedienungsanleitung

Beliebte Transceiver Handbücher anderer Marken

Yaesu

Yaesu FT-7B Bedienungsanleitung

Texas Instruments

Texas Instruments TLK10232 Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung

Uniden

Uniden UH820 Series Bedienungsanleitung

Standard Horizon

Standard Horizon HX320E Bedienungsanleitung

Em-Trak

Em-Trak A100 Bedienungsanleitung

HPE

HPE Aruba QSFP28 Bedienungsanleitung