Kenwood ProTalk LT PKT-23 Bedienungsanleitung

INSTRUCTION MANUAL

B62-2576-20 (K)

UHF FM TRANSCEIVER

PKT-23

Terminal Descriptions

3.5 mm phone jack

No. Name Description Impedance I/O

1 GND Ground Ground −

2 EXTPTT External PTT Detection 47 kI

3 MIC External MIC Input 1.8 kI

4 EXTSP Internal Audio Output 32 O

5 Not used − − −

6 Not used − − −

7 Not used − − −

Micro USB jack (B type)

No. Name Description Impedance I/O

1 VBUS USB Detect 13 kI

2 D- DATA High Impedance/ 44 I/O

3 D+ DATA High Impedance/ 44 I/O

4ID NC − NC

5 GND Ground Ground −

THANK YOU

We are grateful for your purchase of this KENWOOD product

and welcome you to the Business Radio Service (BRS).

Your KENWOOD 2-way Business Radio is called a

“transceiver”, meaning “transmitter & receiver”. We believe

this easy-to-use transceiver will provide you with dependable

and reliable communications. This KENWOOD transceiver is a

precision device. Treat it with care, and you will enjoy years of

reliable operation.

FEATURES

• 4 channels with 99 UHF operating frequencies. Each channel

can be set up with a QT tone or DQT code allowing you to

ignore unwanted calls.

• Hands free operation when using an optional headset.

• Voice announcement lets you know which channel you have

selected and which settings you have made when reassigning

key functions and channel settings.

OPERATING CONDITIONS

Condition Transmission Range

Open locations

(no obstructions) Up to 5 miles (8 km)

In steel/ concrete

reinforced buildings Up to 225,000 square feet (20,900 m2)

In high rises Up to 17 ﬂoors

Note: The listed ranges are based on ﬁeld testing and may vary

with your operating conditions and individual transceiver.

FCC LICENSE INFORMATION

Your KENWOOD transceiver operates on communications

frequencies which are subject to FCC (Federal

Communications Commission) Rules & Regulations. FCC

Rules require that all operators using Private Land Mobile

radio frequencies obtain a radio license before operating their

equipment. Application for license must be made on FCC form

601, schedules D and H, and Remittance form 159.

FAX: Forms can be obtained by fax from the FCC Fax-On-

Demand system. Call 1-202-418-0177 from your fax machine

and request document number 000601 for the form, schedules,

and instructions.

MAIL: Forms can be ordered by telephone, and will be sent to

you by ﬁrst class mail. Call the FCC Forms Hotline at

1-800-418-FORM (1-800-418-3676).

INTERNET: Form 601 and instructions can be downloaded

from the FCC Forms website at

http://www.fcc.gov/formpage.html

Before ﬁlling out your Form 601 application Technical Data

section, you must decide on which frequencies you will operate.

See the frequency charts on pages 13 and 14.

QUESTIONS? Call the FCC for license application questions at

1-888-CALL-FCC (1-888-225-5322).

iii

One or more of the following statements may be

applicable:

FCC WARNING

This equipment generates or uses radio frequency energy. Changes or

modiﬁcations to this equipment may cause harmful interference unless

the modiﬁcations are expressly approved in the instruction manual.

The user could lose the authority to operate this equipment if an

unauthorized change or modiﬁcation is made.

INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY

THE FCC

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can generate radio frequency

energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However,

there is no guarantee that the interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer for technical assistance.

ATTENTION:

The RBRC Recycle seal found on KENWOOD lithium-

ion (Li-ion) battery packs indicates KENWOOD’s

voluntary participation in an industry program to collect

and recycle Li-ion batteries after their operating life

has expired.The RBRC program is an alternative to

disposing Li-ion batteries with your regular refuse or in

municipal waste streams, which is illegal in some areas.

For information on Li-ion battery recycling in your area, call (toll free)

1-800-8-BATTERY (1-800-822-8837).

KENWOOD’s involvement in this program is part of our commitment to

preserve our environment and conserve our natural resources.

NOTICES TO THE USER

◆Government law prohibits the operation of unlicensed radio

transmitters within the territories under government control.

◆Illegal operation is punishable by ﬁne and/or imprisonment.

◆Refer service to qualiﬁed technicians only.

Safety: It is important that the operator is aware of, and

understands, hazards common to the operation of any

transceiver.

PRECAUTIONS

• Do not charge the transceiver and battery pack when they are wet.

• Ensure that there are no metallic items located between the

transceiver and the battery pack.

• Do not use options not speciﬁed by KENWOOD.

• If any transceiver part is damaged, do not touch the damaged

parts.

• If a headset or headphone is connected to the transceiver, reduce

the transceiver volume. Pay attention to the volume level when

turning the squelch off.

• Do not place the cable of the clip microphone with earphone/

hanger around your neck while near machinery that may catch the

cable.

• Do not place the transceiver on unstable surfaces. If the transceiver

switches OFF/ON as a result of falling or hard impact, the volume

and channel conﬁgurations may reset.

• Ensure that the end of the antenna does not touch your eyes.

• Do not immerse the transceiver in water.

• Always switch the transceiver power off before installing optional

accessories.

• The charger is the device that disconnects the unit from the AC

mains line. The AC plug should be readily accessible.

• Do not modify the transceiver for any reason.

• Do not place the transceiver on or near airbag equipment while the

vehicle is running. When the airbag inﬂates, the transceiver may be

ejected and strike the driver or passengers.

• Do not transmit while touching the antenna terminal or if any metallic

parts are exposed from the antenna covering. Transmitting at such a

time may result in a high-frequency burn.

• If an abnormal odor or smoke is detected coming from the transceiver,

switch the transceiver power off immediately, remove the battery pack

from the transceiver, and contact your KENWOOD dealer.

• Use of the transceiver while you are driving may be against trafﬁc laws.

Please check and observe the vehicle regulations in your area.

• Do not expose the transceiver to extremely hot or cold conditions.

• Do not carry the battery pack (or battery case) with metal objects, as

they may short the battery terminals.

• Danger of explosion if the battery is incorrectly replaced; replace

only with the same type.

• When operating the transceiver in areas where the air is dry, it is

easy to build up an electric charge (static electricity). When using

an earphone accessory in such conditions, it is possible for the

transceiver to send an electric shock through the earphone and to

your ear. Do not use an earphone/microphone accessory in areas

where static electricity can be easily generated.

• When attaching a commercial strap to the transceiver, ensure that

the strap is durable. In addition, do not swing the transceiver around

by the strap; you may inadvertently strike and injure another person

with the transceiver.

Turn the transceiver power off in the following locations:

• In explosive atmospheres (inﬂammable gas, dust particles, metallic

powders, grain powders, etc.).

• While taking on fuel or while parked at gasoline service stations.

• Near explosives or blasting sites.

• In aircraft. (Any use of the transceiver must follow the instructions

and regulations provided by the airline crew.)

• Where restrictions or warnings are posted regarding the use of radio

devices, including but not limited to medical facilities.

• Near persons using pacemakers.

Information concerning the battery pack:

The battery pack includes ﬂammable objects such as organic

solvent. Mishandling may cause the battery to rupture

producing ﬂames or extreme heat, deteriorate, or cause other

forms of damage to the battery. Please observe the following

prohibitive matters.

• Do not disassemble or reconstruct the battery!

The battery pack has a safety function and protection circuit to

avoid danger. If they suffer serious damage, the battery may

generate heat or smoke, rupture, or burst into ﬂame.

• Do not short-circuit the battery!

Do not join the + and – terminals using any form of metal (such

as a paper clip or wire). Do not carry or store the battery pack in

containers holding metal objects (such as wires, chain-necklaces or

hairpins). If the battery pack is short-circuited, excessive current will

ﬂow and the battery may generate heat or smoke, rupture, or burst

into ﬂame. It will also cause metal objects to heat up.

• Do not incinerate or apply heat to the battery!

If the insulator is melted, the gas release vent or safety function is

damaged, or the electrolyte is ignited, the battery may generate

heat or smoke, rupture, or burst into ﬂame.

• Do not leave the battery near ﬁre, stoves, or other heat

generators (areas reaching over 60°C/ 140°F)!

If the polymer separator is melted due to high temperature, an

internal short-circuit may occur in the individual cells and the

battery may generate heat or smoke, rupture, or burst into ﬂame.

• Do not immerse the battery in water or get it wet by other

means!

If the battery’s protection circuit is damaged, the battery may

charge at extreme current (or voltage) and an abnormal chemical

reaction may occur. The battery may generate heat or smoke,

rupture, or burst into ﬂame.

• Do not charge the battery near ﬁre or under direct sunlight!

If the battery’s protection circuit is damaged, the battery may

charge at extreme current (or voltage) and an abnormal chemical

reaction may occur. The battery may generate heat or smoke,

rupture, or burst into ﬂame.

vii

• Use only the speciﬁed charger and observe charging

requirements!

If the battery is charged in unspeciﬁed conditions (under high

temperature over the regulated value, excessive high voltage or

current over regulated value, or with a remodeled charger), it may

overcharge or an abnormal chemical reaction may occur. The

battery may generate heat or smoke, rupture, or burst into ﬂame.

• Do not pierce the battery with any object, strike it with an

instrument, or step on it!

This may break or deform the battery, causing a short-circuit. The

battery may generate heat or smoke, rupture, or burst into ﬂame.

• Do not jar or throw the battery!

An impact may cause the battery to leak, generate heat or smoke,

rupture, and/or burst into ﬂame. If the battery’s protection circuit

is damaged, the battery may charge at an abnormal current (or

voltage), and an abnormal chemical reaction may occur. The

battery may generate heat or smoke, rupture, or burst into ﬂame.

• Do not use the battery pack if it is damaged in any way!

The battery may generate heat or smoke, rupture, or burst into

ﬂame.

• Do not solder directly onto the battery!

If the insulator is melted or the gas release vent or safety function

is damaged, the battery may generate heat or smoke, rupture, or

burst into ﬂame.

• Do not reverse the battery polarity (and terminals)!

When charging a reversed battery, an abnormal chemical reaction

may occur. In some cases, an unexpected large amount of current

may ﬂow upon discharging. The battery may generate heat or

smoke, rupture, or burst into ﬂame.

• Do not reverse-charge or reverse-connect the battery!

The battery pack has positive and negative poles. If the battery

pack does not smoothly connect with a charger or operating

equipment, do not force it; check the polarity of the battery. If the

battery pack is reverse-connected to the charger, it will be reverse-

charged and an abnormal chemical reaction may occur. The

battery may generate heat or smoke, rupture, or burst into ﬂame.

viii

• Do not touch a ruptured and leaking battery!

If the electrolyte liquid from the battery gets into your eyes, wash

your eyes with fresh water as soon as possible, without rubbing

your eyes. Go to the hospital immediately. If left untreated, it may

cause eye problems.

• Do not charge the battery for longer than the speciﬁed time!

If the battery pack has not ﬁnished charging even after the

regulated time has passed, stop it. The battery may generate heat

or smoke, rupture, or burst into ﬂame.

• Do not place the battery pack into a microwave or high

pressure container!

The battery may generate heat or smoke, rupture, or burst into

ﬂame.

• Keep ruptured and leaking battery packs away from ﬁre!

If the battery pack is leaking (or the battery emits a bad odor),

immediately remove it from ﬂammable areas. Electrolyte leaking

from the battery can easily catch on ﬁre and may cause the

battery to generate smoke or burst into ﬂame.

• Do not use an abnormal battery!

If the battery pack emits a bad odor, appears to have different

coloring, is deformed, or seems abnormal for any other reason,

remove it from the charger or operating equipment and do not use

it. The battery may generate heat or smoke, rupture, or burst into

ﬂame.

Firmware Copyrights

The title to and ownership of copyrights for ﬁrmware embedded in

KENWOOD product memories are reserved for JVC KENWOOD

Corporation.

Andere Handbücher für ProTalk LT PKT-23

Inhaltsverzeichnis

Sprachen:

Andere Kenwood Transceiver Handbücher

Kenwood

Kenwood TH-G71A Bedienungsanleitung

Kenwood

Kenwood TH-22A Bedienungsanleitung

Kenwood

Kenwood NEXEDGE NX-720 Bedienungsanleitung

Kenwood

Kenwood TK-190 Bedienungsanleitung

Kenwood

Kenwood NEXEDGE NX-700 series Bedienungsanleitung

Kenwood

Kenwood TS-950SDX Bedienungsanleitung

Kenwood

Kenwood NX-1200 Series Bedienungsanleitung

Kenwood

Kenwood TK-3170 Bedienungsanleitung

Kenwood

Kenwood TS-515 Bedienungsanleitung

Kenwood

Kenwood TK-7160 Bedienungsanleitung

Kenwood

Kenwood Nexedge NX-300GE Bedienungsanleitung

Kenwood

Kenwood TH-235A Bedienungsanleitung

Kenwood

Kenwood NX-5600HB Bedienungsanleitung

Kenwood

Kenwood TS-711A Bedienungsanleitung

Kenwood

Kenwood TK-2000 Bedienungsanleitung

Kenwood

Kenwood TM-642A Bedienungsanleitung

Kenwood

Kenwood TR-7200G Bedienungsanleitung

Kenwood

Kenwood TK-3312 Bedienungsanleitung

Kenwood

Kenwood TH-22A Bedienungsanleitung

Kenwood

Kenwood TK-885 Bedienungsanleitung

Kenwood

Kenwood TK-2102 Bedienungsanleitung

Kenwood

Kenwood TK-3601D-E Bedienungsanleitung

Kenwood

Kenwood TR-7400A Bedienungsanleitung

Kenwood

Kenwood TM-281A Bedienungsanleitung

Beliebte Transceiver Handbücher anderer Marken

Yaesu

Yaesu FT-7B Bedienungsanleitung

Texas Instruments

Texas Instruments TLK10232 Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung

Uniden

Uniden UH820 Series Bedienungsanleitung

Standard Horizon

Standard Horizon HX320E Bedienungsanleitung

Em-Trak

Em-Trak A100 Bedienungsanleitung

HPE

HPE Aruba QSFP28 Bedienungsanleitung