Keysight Technologies E4990A Bedienungsanleitung

Keysight E4990A

Impedance Analyzer

Installation Guide

Impedance Analyzer 1

Notices

No part of this manual may be reproduced

in any form or by any means (including

electronic storage and retrieval or transla-

tion into a foreign language) without prior

agreement and written consent from Key-

sight Technologies as governed by United

States and international copyright laws.

Manual Printing History

The manual’s printing date and part num-

ber indicate its current edition. The printing

date changes when a new edition is printed

(minor corrections and updates that are

incorporated at reprint do not cause the

date to change). The manual part number

changes when extensive technical

changes are incorporated.

March 2014 Edition 1

August 2014 Edition 2

Manual Part Number

E4990-90000

Edition

Edition 2, March 2014

Printed in Malaysia

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Keysight disclaims all warran-

ties, either express or implied, with

regard to this manual and any infor-

mation contained herein, including

but not limited to the implied warran-

ties of merchantability and fitness for

a particular purpose. Keysight shall

not be liable for errors or for inciden-

tal or consequential damages in con-

nection with the furnishing, use, or

performance of this document or of

any information contained herein.

Should Keysight and the user have a

separate written agreement with

warranty terms covering the material

in this document that conflict with

these terms, the warranty terms in

the separate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license

Restricted Rights Legend

If software is for use in the performance of

a U.S. Government prime contract or sub-

contract, Software is delivered and

licensed as “Commercial computer soft-

ware” as defined in DFAR 252.227-7014

(June 1995), or as a “commercial item” as

defined in FAR 2.101(a) or as “Restricted

computer software” as defined in FAR

52.227-19 (June 1987) or any equivalent

agency regulation or contract clause. Use,

duplication or disclosure of Software is

subject to Keysight Technologies’ standard

commercial license terms, and non-DOD

Departments and Agencies of the U.S. Gov-

ernment will receive no greater than

Restricted Rights as defined in FAR

52.227-19(c)(1-2) (June 1987). U.S. Govern-

ment users will receive no greater than

Limited Rights as defined in FAR 52.227-14

(June 1987) or DFAR 252.227-7015 (b)(2)

(November 1995), as applicable in any

technical data.

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and met.

NOTE

This Note sign denotes important

information. It calls attention to a

procedure, practice, or condition

that is essential for the user to

understand.

Impedance Analyzer 3

Caution

Do not exceed the operating input power, voltage,

and current level and signal type appropriate for the

instrument being used, refer to your instrument's Function

Reference.

Electrostatic discharge (ESD) can damage the highly

sensitive microcircuits in your instrument. ESD damage is

most likely to occur as the test fixtures are being connected

or disconnected. Protect them from ESD damage by wearing

a grounding strap that provides a high resistance path to

ground. Alternatively, ground yourself to discharge any static

charge built- up by touching the outer shell of any grounded

instrument chassis before touching the test port connectors.

Safety Summary

When you notice any of the unusual conditions listed below,

immediately terminate operation and disconnect the power

cable.

Contact your local Keysight Technologies sales representative

or authorized service company for repair of the instrument.

If you continue to operate without repairing the instrument,

there is a potential fire or shock hazard to the operator.

•Instrument operates abnormally.

•Instrument emits abnormal noise, smell, smoke or a

spark- like light during operation.

•Instrument generates high temperature or electrical shock

during operation.

•Power cable, plug, or receptacle on instrument is

damaged.

•Foreign substance or liquid has fallen into the instrument.

4Impedance Analyzer

Manufacturer’s Declaration

Herstellerbescheinigung

GERA- USCHEMISSION

LpA < 70 dB

am Arbeitsplatz

normaler Betrieb

nach DIN 45635 T. 19

Manufacturer's Declaration

ACOUSTIC NOISE EMISSION

LpA < 70 dB

operator position

normal operation

per ISO 7779

Regulatory Compliance Information

This product complies with the essential requirements of the

following applicable European Directives, and carries the CE

marking accordingly:

•The Low Voltage Directive 2006/95/EC

•The EMC Directive 2004/108/EEC

To obtain Declaration of Conformity, please contact your

local Keysight Technologies sales office, agent or distributor.

Safety Notice Supplement

•This equipment complies with EN/IEC61010- 1:2001.

•This equipment is of MEASUREMENT CATEGORY I (CAT

I). Do not use for CAT II, III, or IV.

•This equipment is a POLLUTION DEGREE 2, INDOOR

USE product.

•This equipment is tested in stand- alone condition and in

combination with the accessories supplied by Keysight

Technologies against the requirement of the standards

described in the Declaration of Conformity. If it is used

as a system component, compliance of related regulations

and safety requirements are to be confirmed by the

builder of the system.

•Do not connect the measuring terminals to mains.

Impedance Analyzer 5

General Safety Precautions

The following general safety precautions must be observed

during all phases of operation, service, and repair of this

instrument. Failure to comply with these precautions or with

specific WARNINGS elsewhere in this manual may impair the

protection provided by the equipment. Such noncompliance

would also violate safety standards of design, manufacture,

and intended use of the instrument. Keysight Technologies

assumes no liability for the customer’s failure to comply

with these precautions.

•Ground the Instrument

To avoid electric shock, the instrument chassis and

cabinet must be grounded with the supplied power cable’s

grounding prong.

•DO NOT Operate in an Explosive Atmosphere

Do not operate the instrument in the presence of

inflammable gasses or fumes. Operation of any electrical

instrument in such an environment clearly constitutes a

safety hazard.

•Keep Away from Live Circuits

Operators must not remove instrument covers. Component

replacement and internal adjustments must be made by

qualified maintenance personnel. Do not replace

components with the power cable connected. Under

certain conditions, dangerous voltage levels may remain

even after the power cable has been disconnected. To

avoid injuries, always disconnect the power and discharge

circuits before touching them.

•DO NOT Service or Adjust the Instrument Alone

Do not attempt internal service or adjustment unless

another person, capable of rendering first aid and

resuscitation, is present.

•DO NOT Substitute Parts or Modify the Instrument

NOTE

The E4990A complies with INSTALLATION CATEGORY II as well as

POLLUTION DEGREE 2 in IEC61010-1. The E4990A is an INDOOR USE

product.

NOTE

The LEDs in the E4990A are Class 1 in accordance with IEC60825-1,

CLASS 1 LED PRODUCT.

6Impedance Analyzer

To avoid the danger of introducing additional hazards, do

not install substitute parts or perform unauthorized

modifications to theinstrument. Return theinstrument

to aKeysight Technologies Sales and Service Office for

service and repair to ensure that safety features are

maintained in operational condition.

•Dangerous Procedure Warnings

Warnings, such as the example below, precede potentially

dangerous procedures throughout this manual.

Instructions contained in the warnings must be followed.

Safety Symbols

General definitions of safety symbols used on the instrument

or in manuals are listed below.

WARNING

Dangerous voltage levels, capable of causing death, are present in

this instrument. Use extreme caution when handling, testing, and

adjusting this instrument.

Instruction Manual symbol: the product is marked

with this symbol when it is necessary for the user

to refer to the instrument manual.

Alternating current.

Direct current.

On (Supply).

Off (Supply).

A chassis terminal; a connection to the

instrument’s chassis, which includes all exposed

metal structure.

Standby.

Impedance Analyzer 7

Certification

Keysight Technologies certifies that this product met its

published specifications at the time of shipment from the

factory. Keysight Technologies further certifies that its

calibration measurements are traceable to the United States

National Institute of Standards and Technology, to the extent

allowed by the Institution’s calibration facility or by the

calibration facilities of other International Standards

Organization members.

Documentation Warranty

The material contained in this document is provided "as is,"

and is subject to being changed, without notice, in future

editions. Further, to the maximum extent permitted by

applicable law, Keysight disclaims all warranties, either

express or implied with regard to this manual and any

information contained herein, including but not limited to

the implied warranties of merchantability and fitness for a

particular purpose. Keysight shall not be liable for errors or

for incidental or consequential damages in connection with

the furnishing, use, or performance of this document or any

information contained herein. Should Keysight and the user

have a separate written agreement with warranty terms

covering the material in this document that conflict with

these terms, the warranty terms in the separate agreement

will control.

Exclusive Remedies

The remedies provided herein are Buyer’s sole and exclusive

remedies. Keysight Technologies shall not be liable for any

direct, indirect, special, incidental, or consequential damages,

whether based on contract, tort, or any other legal theory.

Assistance

Product maintenance agreements and other customer

assistance agreements are available for Keysight Technologies

products.

For any assistance, contact your nearest Keysight

Technologies Sales and Service Office. Addresses are

provided at the back of this manual.

8Impedance Analyzer

Manuals for E4990A

Keysight provides the following three manuals for E4990A.

The latest version of all documentations can be downloaded

from http://www.keysight.com/find/E4990A- manual.

Installation Guide

The installation guide (this manual) provides start up setup

information when you use the E4990A for the first time and

troubleshooting information when the Windows cannot be

boot up. See this manual first when you use the E4990A for

the first time.

Online Help

The online help provides the information about the quick

start, measurement operation, programming, and I/O

interface. This is pre- installed in the E4990A. Press [Help]

hard key on the front panel to open. Quick Start helps in

understanding the E4990A operation quickly.

The latest version of online help is available at:

http://ena.tm.keysight.com/E4990A/manuals/webhelp/eng/

The online help has context sensitive help, which is a great

feature of the E4990A help. It allows you to get information

about the selected softkey by pressing the Help key in the

E4990A or by pressing F1 in a keyboard attached to the

E4990A or by clicking the help button in a dialog box. With

context sensitive help, users can receive information quickly

about the area the user is working in the firmware of the

E4990A. It provides information relevant to the task that

needs to be accomplished and reduces the time to search

relevant information required to complete a task.

Service Guide

The service manual provides information about the parts,

troubleshooting, performance test, adjustment and service

menu.

Andere Handbücher für E4990A

Inhaltsverzeichnis

Andere Keysight Technologies Messgerät Handbücher

Keysight Technologies

Keysight Technologies FieldFox B Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies M9260A Benutzerhandbuch

Keysight Technologies

Keysight Technologies N5221B Bedienungsanleitung

Keysight Technologies

Keysight Technologies N778 B Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies N6705C Service-Handbuch

Keysight Technologies

Keysight Technologies M9391A PXIe Benutzerhandbuch

Keysight Technologies

Keysight Technologies M9393A Kurzanleitung

Keysight Technologies

Keysight Technologies E5072A Bedienungsanleitung

Keysight Technologies

Keysight Technologies PNA-L N5230A Bedienungsanleitung

Keysight Technologies

Keysight Technologies X Series Installations- und Betriebshandbuch

Keysight Technologies

Keysight Technologies N9030B Installations- und Betriebshandbuch

Keysight Technologies

Keysight Technologies U8903B Bedienungsanleitung

Keysight Technologies

Keysight Technologies N9321C Bedienungsanleitung

Keysight Technologies

Keysight Technologies E8364-60108 Installations- und Betriebshandbuch

Keysight Technologies

Keysight Technologies N9041B Installations- und Betriebshandbuch

Keysight Technologies

Keysight Technologies FieldFox Bedienungsanleitung

Keysight Technologies

Keysight Technologies M937 A Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies N9030B Installations- und Betriebshandbuch

Keysight Technologies

Keysight Technologies E4980A Bedienerhandbuch

Keysight Technologies

Keysight Technologies N4373E Bedienungsanleitung

Keysight Technologies

Keysight Technologies N9030B Installations- und Betriebshandbuch

Keysight Technologies

Keysight Technologies B2980A Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies UXA Installations- und Betriebshandbuch

Keysight Technologies

Keysight Technologies X Series Kurzanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung