Keysight Technologies 16047A Bedienungsanleitung

Operation and

Service Manual

Keysight 16047A Test Fixture

Notices

2014-2017

No part of this manual may be

reproduced in any form or by any

means (including electronic storage

and retrieval or translation into a

foreign language) without prior

agreement and written consent from

Keysight Technologies, Inc. as

governed by United States and

international copyright laws.

Trademark Acknowledgments

Manual Part Number

16047-90011

Print Date

April 2017

Printed by Keysight Technologies

International Japan GK, 1-3-3

Higashikawasaki-cho, Chuo-ku,

Kobe-shi, Hyogo, Japan

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,”

AND IS SUBJECT TO BEING

CHANGED, WITHOUT NOTICE, IN

FUTURE EDITIONS. FURTHER, TO

THE MAXIMUM EXTENT PERMITTED

BY APPLICABLE LAW, KEYSIGHT

DISCLAIMS ALL WARRANTIES,

EITHER EXPRESS OR IMPLIED WITH

REGARD TO THIS MANUAL AND

ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT

LIMITED TO THE IMPLIED

WARRANTIES OF

MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE.

KEYSIGHT SHALL NOT BE LIABLE

FOR ERRORS OR FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES IN

CONNECTION WITH THE

FURNISHING, USE, OR

PERFORMANCE OF THIS

DOCUMENT OR ANY INFORMATION

CONTAINED HEREIN. SHOULD

KEYSIGHT AND THE USER HAVE A

SEPARATE WRITTEN AGREEMENT

WITH WARRANTY TERMS

COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH

THESE TERMS, THE WARRANTY

TERMS IN THE SEPARATE

AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/or software

described in this document are

furnished under a license and may be

used or copied only in accordance

with the terms of such license.

U.S. Government Rights

The Software is “commercial

computer software,” as defined

by Federal Acquisition Regulation

(“FAR”) 2.101. Pursuant to FAR

12.212 and 27.405-3 and

Department of Defense FAR

Supplement (“DFARS”) 227.7202,

the U.S. government acquires

commercial computer software

under the same terms by which

the software is customarily

provided to the public.

Accordingly, Keysight provides

the Software to U.S. government

customers under its standard

commercial license, which is

embodied in its End User License

Agreement (EULA), a copy of

which can be found at

http://www.keysight.com/find/sweula

The license set forth in the EULA

represents the exclusive authority

by which the U.S. government

may use, modify, distribute, or

disclose the Software. The EULA

and the license set forth therein,

does not require or permit,

among other things, that

Keysight: (1) Furnish technical

information related to

commercial computer software

or commercial computer

software documentation that is

not customarily provided to the

public; or (2) Relinquish to, or

otherwise provide, the

government rights in excess of

these rights customarily provided

to the public to use, modify,

reproduce, release, perform,

display, or disclose commercial

computer software or

commercial computer software

documentation. No additional

government requirements

beyond those set forth in the

EULA shall apply, except to the

extent that those terms, rights, or

licenses are explicitly required

from all providers of commercial

computer software pursuant to

the FAR and the DFARS and are

set forth specifically in writing

elsewhere in the EULA. Keysight

shall be under no obligation to

update, revise or otherwise

modify the Software. With

respect to any technical data as

defined by FAR 2.101, pursuant

to FAR 12.211 and 27.404.2 and

DFARS 227.7102, the U.S.

government acquires no greater

than Limited Rights as defined in

FAR 27.401 or DFAR 227.7103-5

(c), as applicable in any technical

data.

Safety Notices

A CAUTION notice denotes a hazard. It

calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or adhered

to, could result in damage to the

product or loss of important data. Do

not proceed beyond a CAUTION

notice until the indicated conditions

are fully understood and met.

A WARNING notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or adhered

to, could result in personal injury or

death. Do not proceed beyond a

WARNING notice until the indicated

conditions are fully understood and

met.

Contents

1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation

Introduction 5

Product Description 6

Specifications 7

Typical Characteristics 8

Compensation for Fixture Residual Impedance Error 9

2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Service

Maintenance 11

For non-RoHS 16047A (Serial Prefix: MY/SG441) 12

For RoHS 16047A (Serial Prefix: MY/SG442 and above) 16

Contents

Operation

Introduction

16047A Test Fixture Operation and Service Manual

1 Operation

Introduction

This chapter provides complete information of the 16047A Test Fixture.

If you have any questions after reviewing this information, please contact your

local Keysight Technologies Inc. representative or contact us through our

support Website at http://www.keysight.com/support.

Operation

Product Description

The 16047A Test Fixture is designed for use with 4 terminal-pair LCR Meters

and Impedance Analyzers..

It is a direct attachment,4-terminal pair configuration type test fixture for

measurements on both axial and radial lead components. Three contact inserts

(labeled 1, 2, and 3 in Figure 1-1) are available: (1), for measurements on axial

components and (2) and (3), for measurements on radial lead components.

These parts number is listed in Table 1-1. The dimensions of the contact

inserts are given in Table 1-2.

Figure 1-1 16047A Test Fixture

Table 1-1 Parts Number

Keysight Part No.

1 16061-70022

2 16047-65001

3 16061-70021

Operation

Specifications

Table 1-2 Specification of the 16047A

Function: For use with 4 terminal-pair LCR Meters and Impedance

Analyzers.

Measurable

components:

Axial and radial lead components.

Contact inserts: Three kinds: one for axial lead components, one for radial

lead components, and one for radial short lead components.

Dimensions of Test

Fixture Contacts:

Frequency: 13 MHz

Maximum Voltage: 40V peak max. (AC+DC)

Dimensions of test

fixture:

124 (W) ´ 31 (D) ´ 62 (H) mm

Weight: 205 g

Safety Standards: EN61010-1:1993 +A2:1995

IEC61010-1:1990 +A1:1992 +A2:1995

CSA C22.2 No.1010.1:1992

INSTALLATION CATEGORY I

POLLUTION DEGREE 2

INDOOR USE

Operation

Typical Characteristics

Figure 1-2 Incremental error at frequency above 1 MHz

Table 1-3 Typical characteristics

Incremental Error at f 1  MHz

Parameter reading error Offset Value for D

f is the measurement frequency in MHz. The incremental errors calculated from the

equation in the table for measurements at frequencies above l MHz are additive.

Operation

Compensation for Fixture Residual Impedance Error

The 16047A has inherent stray capacitance, residual inductance, and residual

resistance that affect the accuracy of measured values. To compensate for, or

negate, these residuals to minimize measurement error, the instrument’s

Open/Short compensation procedure should be performed. The procedure is

given in the instrument’s operating manual. For SHORT compensation a low

impedance copper or phosphor bronze shorting bar such as the one shown in

Figure 1-3 is recommended.

Figure 1-3 Shorting-bar dimensions

Operation

Compensation for Fixture Residual Impedance Error

Inhaltsverzeichnis

Andere Keysight Technologies Prüfgeräte Handbücher

Keysight Technologies

Keysight Technologies 16192A Bedienungsanleitung

Keysight Technologies

Keysight Technologies N4877A Bedienungsanleitung

Keysight Technologies

Keysight Technologies IOT8700 Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies 85051B Handbuch

Keysight Technologies

Keysight Technologies N108 A-Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies N4891A Bedienungsanleitung

Keysight Technologies

Keysight Technologies E6640A EXM Installations- und Betriebshandbuch

Keysight Technologies

Keysight Technologies Infiniium 90000A Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies 85038A 7-16 Handbuch

Keysight Technologies

Keysight Technologies E6640A Bedienungsanleitung

Keysight Technologies

Keysight Technologies U3022BH10 Handbuch

Keysight Technologies

Keysight Technologies E7515A Bedienungsanleitung

Keysight Technologies

Keysight Technologies S8780A Bedienungsanleitung

Keysight Technologies

Keysight Technologies E6640A Bedienungsanleitung

Keysight Technologies

Keysight Technologies TN2870A Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies InfiniiVision MSO-X 4022A Handbuch

Keysight Technologies

Keysight Technologies D9020DDRC Bedienungsanleitung

Keysight Technologies

Keysight Technologies N5280A Handbuch

Keysight Technologies

Keysight Technologies U3042AM20 Handbuch

Keysight Technologies

Keysight Technologies InfiniVision 6000L Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies M8000 Series Bedienungsanleitung

Keysight Technologies

Keysight Technologies N2142A Bedienungsanleitung

Keysight Technologies

Keysight Technologies 85059V Service-Handbuch

Keysight Technologies

Keysight Technologies 85058V Handbuch

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung