Keysight B2900A Bedienungsanleitung

1-2. Use AUTO measurement operation

a. Rotate to select Resistance measurement operation,

and then press to edit it. Then select to set

Resistance measurement operation to AUTO.

b. Press Ch1 to turn on Channel 1 Output relay.

c. Press to perform a single point measurement.

d. Press to repeat single point measurements periodically.

e. Press to stop making measurements periodically.

1-3. Turn off the channel output

a. Press Ch1 to turn off Channel 1 Output relay.

Setup-1

1. Connect the yellow banana plug to Ch 1 Low Force terminal.

2. Connect the red banana plug to Ch 1 High Force terminal.

3. Clip the one lead of 1 kΩ Resistor with the black gold-plated

tweezers.

4. Clip the other lead of 1 kΩ Resistor with the red gold-plated

tweezers.

1. Make a resistance measurement

1-1. Change View mode to Single View

a. Press repeatedly until Single View for Channel 1 is

shown in the display.

Setup-2

1. Connect the yellow banana plug to Ch 1 Low Force terminal.

2. Connect the orange banana plug to Ch 1 Low Sense terminal.

3. Connect the red banana plug to Ch 1 High Force terminal.

4. Connect the brown banana plug to Ch 1 High Sense terminal.

5. Clip the one lead of 1 Ω Resistor with red gold-plated at

tweezers.

6. Clip the other lead of 1 Ω Resistor with black gold-plated

tweezers.

2. Make an accurate low resistance measurement

2-1. Reset the instrument

a. Press , and then press to

display Conrmation dialogue.

“Auto” indicator is turned off

Measurement parameters are

updated periodically

“Auto” indicator is turned on

(1) Press More…

(2) Press System

(3) Press Reset

Red

(11059A)

Yellow

(11059A)

Black

(11059A)

Red

(11059A)

Black

Brown

1 kΩ resistor

Black

Brown

Silver

1 Ω resistor

Red (11059A)

Yellow (11059A)

Red

(11059A)

Black (11059A)

Brown

(11059A)

Orange (11059A)

Demo Guide

Making Resistance Measurement Using B2901A/02A/11A/12A

B2900A Series Precision Source/Measure Unit

Procedure Overview

1. Make a resistance measurement

2. Make an accurate low resistance measurement

Required instrument and accessory

Keysight B2901A/02A/11A/12A

Precision Source/Measure Unit

1.1 kΩ resistor

1 kΩ resistor Keysight 11059A

Kelvin Probe Set

Objective

This demo shows how easily a resistance measurement can

be made with the B2900A Series via easy-to-use Graphical

User Interface.

Measurement parameters are

updated whenever Trigger Button is

pressed

g. Press Ch1 to turn on Channel 1 Output relay.

h. Press to perform a single point measurement.

2-3. Perform the measurement via 2-wire connection

a. Press Ch1 to turn off Channel 1 Output relay.

b. Press , , and then press to display

Output connection dialogue.

c. Press , , and then press to congure to

use 2-wire connection.

d. Press Ch1 to turn on Channel 1 Output relay.

e. Press to perform a single point measurement.

b. Press to reset the instrument.

2-2. Perform the measurement via 4-wire connection

a. Press , , and then press to display

Output Connection dialogue.

b. Press and select , and then press to

congure to use 4-wire connection.

c. Press , then press to set Channel 1 V/I Source

Function to I Source. (If can’t be found on the Assist

keys, press to change the keys.)

d. Press and set Channel 1 Source Value to 10 mA.

e. Press and set Channel 1 Limit value to 1 V.

f. Rotate to select Resistance measurement operation

and press to edit it. Then press to set Resistance

measurement operation to V/I.

This information is subject to change without notice.

Published in USA, August 4, 2014

www.keysight.com

Keysight | Making Resistance Measurement Using B2901A/02A/11A/12A – Demo Guide

2-4. Compare two results

a. Compare two results to see the effect of 4-wire connection.

The result with 4-wire connection is 1 Ohm, while the one with

2-wire connection is 1.6 Ohm. The difference, that is 0.6 Ohm,

should be the residual lead resistance on the measurement

cables.

Congure 4-wire connection

If the channel is congured to use 4-wire connection, you

can see the status indicator on GUI as below, although no

indicator can be seen on being congured to use 2-wire

connection.

For other unlisted countries:

www.keysight.com/nd/contactus

www.keysight.com

www.keysight.con/nd/precisionSMU

2-wire connection 4-wire connection

High Force

Low Force

B2901/02/11/12A

RDUT

RLead

VMeas

ISource

a) Result with 2-wire connection b) Result with 4-wire connection

High Force

Low Force

Low Sense

High Sense

B2901/02/11/12A

VMeas

ISource

RDUT

RLead

The result with 2-wire connection includes the residual lead resistance Lead

5991-3950EN

Andere Handbücher für B2900A

Dieses Handbuch passt für folgende Modelle

Andere Keysight Messgerät Handbücher

Keysight

Keysight Y1276A Kurzanleitung

Keysight

Keysight M9601A Benutzerhandbuch

Keysight

Keysight E5505A Bedienungsanleitung

Keysight

Keysight N9030B Installations- und Betriebshandbuch

Keysight

Keysight U1583B Bedienungsanleitung

Keysight

Keysight PXA N9030A Installations- und Betriebshandbuch

Keysight

Keysight N7744A Bedienungsanleitung

Keysight

Keysight M9614A Bedienerhandbuch

Keysight

Keysight N9010B EXA Installations- und Betriebshandbuch

Keysight

Keysight E5063A Bedienungsanleitung

Keysight

Keysight U8903A Bedienungsanleitung

Keysight

Keysight PXA N9030A Installations- und Betriebshandbuch

Keysight

Keysight U8903B Bedienungsanleitung

Keysight

Keysight PXA Series Installations- und Betriebshandbuch

Keysight

Keysight InfiniiMax III+ N7000 Bedienungsanleitung

Keysight

Keysight FieldFox B Series Bedienungsanleitung

Keysight

Keysight U1401B Handbuch

Keysight

Keysight N5232A Option 200 Installations- und Betriebshandbuch

Keysight

Keysight M9703A Series Kurzanleitung

Keysight

Keysight U2781A Bedienungsanleitung

Keysight

Keysight ENA Series Bedienungsanleitung

Keysight

Keysight NFA Series Betriebsanleitung

Keysight

Keysight N5264A Bedienungsanleitung

Keysight

Keysight N6705C Service-Handbuch

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

ADTEK

ADTEK MW-5 Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung