09 | Keysight | N9342C/N9343C/N9344C HSA Handheld Spectrum Analyzer - Demonstration Guide
Demonstration 3
Save, recall, and the unique User key
Instructions for the source Keystrokes for the source
Set 2-GHz center frequency, amplitude -10 dBm, W-CDMA signal [Preset], [Freq], [2], {GHz}, [Amplitude], [-10], {dBm}, [Mode], {W-CDMA}, {Arb
W-CDMA (3GPP 12-2004}, {W-CDMA (On)}, [Mod On], [RF On]
Instructions for HSA Keystrokes for HSA
Preset N934xC HSA [Preset]
Select internal C:/USER/STATE folder
Note: For the user key feature, the STA le must be placed under the
USER/STATE directory
[Shift], [File], rotate the knob to select the USER folder, [Enter], rotate the
knob to select the STATE folder, [Enter], {Return}
You may have to create the USER and STATE directory folders [Shift], [File], {Directory}, {Create Folder}
Set QSave le type [Shift], [File], {Setup}, {QSave Type}, {STA}
Turn on QSave naming {QSave Naming (On)}, {Return}
Set center frequency and span [Freq], {Center Freq}, [2], {GHz}, [Span], [10], {MHz}
Turn on channel power [Meas], {Channel Power}
Set integrated BW {Integrated BW}, [5], {MHz}
Save le [Shift], [Save], input the le name [WCDMA_CHP] in the “Save As” dialog box
and press [Enter]
Turn on OBW [Meas], [Meas], {Occupied BW}
Save le [Shift], [Save], input the le name [WCDMA_OBW] in the “Save As” dialog box,
[Enter]
Preset N934xC HSA [Preset]
Use the User key
(As shown in Figure 17, channel power and OBW’s state le name appears
on the soft key button)
[Shift], [User]
Make measurement with User key
Channel power {WCDMA_CHP}
OBW [Shift], [User], {WCDMA_OBW}
Figure 3. USER key
The N934xC HSAs let you save the state, trace data, measurement
results (peak and marker table), limit lines, and screen captures to an
internal le, a USB drive, or remotely via LAN or USB.
The N934xC HSAs provide a dedicated Save button to let you save a
le quickly with a single button press. When the Save button is used,
you can choose to name the le by yourself, or let the HSA automati-
cally pick a le name that consists of a prex (N934xC is the default
but can be edited) and a index.
Another unique feature on the N934xC HSAs is the User key, which
provides a quick way to set up the instrument. You can select from
7 predened instrument setups with a single button push.
