Keysight M9614A Bedienerhandbuch

Keysight M9614A/M9615A

PXIe 5-Channel

Precision Source/Measure Unit

Quick Startup Poster

Installation Procedure

This document provides the brief installation procedure. Go to www.keysight.com/find/m9614a or

www.keysight.com/find/m9615a and get Keysight M9614A/M9615A Startup Guide and Keysight M9614A/M9615A

software installer. Refer to the Startup Guide for more information.

1. Unpack the module and inspect it for any shipping damage.

2. Verify the shipment contents. The following items must be included in this shipment.

- M9614A or M9615A PXIe 5-Channel Precision Source/Measure Unit module, 1 ea.

- Connector-Terminal Block, 1 ea.

- Short Bar, 1 ea.

- Certificate of Calibration (without test data), 1 ea.

- Quick Startup Poster (this document), 1 ea.

3. Install the software.

Requirements: The followings are required for installing the software.

- Controller (desktop PC, laptop PC, rackmount PC, or PXIe embedded computer) installed with Keysight IO

Libraries Suite

- Keysight PXIe chassis which has already been set up

Copy the M9614A/M9615A software installer into the controller, launch it, and follow the instruction prompts

to install the software.

Declaration of Conformity

Declarations of Conformity for this product and for other Keysight products may be downloaded from the Web. Go

to www.keysight.com/go/conformity. You can then search by product number to find the latest Declaration of

Conformity.

Please use ESD Precautions when handling and operating.

*M9615-90100*

This information is subject to change without notice.

M9615-90100

www.keysight.com

4. Install the module.

a. Make sure that the power cord is plugged into a grounded outlet.

b. Make sure that the chassis power switch is Off.

c. If the chassis has multiple fan speed settings, ensure that the fans are set to automatic.

d. Remove the filler panel that covers the slot in which you want to install the module.

e. Remove thread protectors from the top and bottom mounting screws of the module.

f. Hold the module by the injector/ejector handle and slide it into the slot.

g. Latch the module by pulling up on the injector/ejector handle and secure the front panel to the chassis using the

module front-panel mounting screws.

h. Tighten the screws on the module front panel.

i. Install all chassis covers, filler panels, and air scoops after installing the module.

5. Verify operation of the module.

a. Make sure that the chassis and the controller are turned off.

b. If you are using a remote controller (rackmount, desktop, or laptop PC), connect a PXIe cable between the chassis

and the controller.

c. Power up the chassis. Verify that the chassis fans are operating and free of obstructions that may restrict airflow.

d. Power up the controller.

e. Check that the controller automatically recognizes the module in the device manager; e.g. via Start menu >

Windows System Tools > Control Panel > Device Manager. The module should be visible in the device tree.

The controller might request a reboot. Reboot the controller, if requested.

f. Check if the module is also visible in the Keysight Connection Expert; e.g. via Start menu > Keysight Connection

Expert.

Latest Information

To get the latest firmware, software, electronic manuals, and support information, go to www.keysight.com. You can

then search them by product number.

Andere Handbücher für M9614A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Keysight Messgerät Handbücher

Keysight

Keysight 16192A Bedienungsanleitung

Keysight

Keysight 16196A Bedienungsanleitung

Keysight

Keysight E5081A ENA-X Series Benutzerhandbuch

Keysight

Keysight N7744A Bedienungsanleitung

Keysight

Keysight N5227B Bedienungsanleitung

Keysight

Keysight PNA-X N5241A Bedienungsanleitung

Keysight

Keysight U8903B Bedienungsanleitung

Keysight

Keysight N2800A Bedienungsanleitung

Keysight

Keysight E4982A Bedienungsanleitung

Keysight

Keysight U1242C Bedienungsanleitung

Keysight

Keysight N9010AK-MTU Installations- und Betriebshandbuch

Keysight

Keysight N9923A Bedienungsanleitung

Keysight

Keysight N1911A Betriebsanleitung

Keysight

Keysight Streamline Series Benutzerhandbuch

Keysight

Keysight M9703A Series Kurzanleitung

Keysight

Keysight B2900A Bedienungsanleitung

Keysight

Keysight E4991B Bedienungsanleitung

Keysight

Keysight U1401B Bedienungsanleitung

Keysight

Keysight x series Betriebsanleitung

Keysight

Keysight M9602A PXIe Benutzerhandbuch

Keysight

Keysight P-Series Bedienungsanleitung

Keysight

Keysight N432A Bedienungsanleitung

Keysight

Keysight N5241AU- 927 Installations- und Betriebshandbuch

Keysight

Keysight N1911A Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

ADTEK

ADTEK MW-5 Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung