Keysight N9030B Installations- und Betriebshandbuch

Option BU7

85 MHz to 160 MHz Analysis Bandwidth

Keysight N9030B PXA Signal Analyzer

Installation Note

Notices

The information contained in this document is subject to change without notice.

Keysight Technologies makes no warranty of any kind with regard to this material, including but

not limited to, the implied warranties of merchantability and fitness for a particular purpose.

Keysight Technologies shall not be liable for errors contained herein or for incidental or

consequential damages in connection with the furnishing, performance, or use of this material.

Manual Part Number

N9030-90076

Edition

Edition 1, February 2016

Printed in USA/Malaysia

Published by:

Keysight Technologies, Inc.

1400 Fountaingrove Parkway

Santa Rosa, CA 95403

Installation Note N9030-90076 3

85 MHz to 160 MHz Analysis Bandwidth Retrofit Kit

Products Affected: N9030B PXA Signal Analyzer with Option B85

Serial Numbers: All

To Be Performed By: (X) Keysight Service Center

(X) Personnel Qualified by Keysight

(X) Customer

Estimated Installation Time:

Estimated Adjustment and Verification Time:

0.5 Hours

0 Hours

4Installation Note N9030-90076

85 MHz to 160 MHz Analysis Bandwidth Retrofit Kit

Introduction

This kit contains the instructions required to increase the analysis bandwidth on instruments that

currently have option B85. Option B85 already provides the hardware for 160 MHz analysis

bandwidth. This retrofit kit installs the B1X and B1Y license files that extends the analysis

bandwidth to 160 MHz.

Contents

Tools Required

— Personal computer with internet access and USB port.

— USB storage device with > 2 GB free memory

— Keysight Calibration and Adjustment software, N7814A TME Calibration Application

version E.16.00 or later

— Test equipment and computer supported by the X-Series Performance Tests and Adjustment

software.

1. The latest revision of the X-Series signal analyzer software may be

downloaded from:

http://www.keysight.com/find/Xseries_software.

2. This option is licensed for one instrument model/serial number

combination. The license key will only install on the designated

instrument.

3. Option BU7 is an ordering number only. The option BU7 will not appear

on the instrument.

4. It is assumed that prior to this installation, option B85 is installed, and

that the 85 MHz analysis bandwidth “IF path” is functional and meets

all specifications.

Quantity Description Keysight Part

Number

1 Installation Note This note

1 Option Upgrade Entitlement Certificate 5964-5178

Installation Note N9030-90076 5

85 MHz to 160 MHz Analysis Bandwidth Retrofit Kit

Installation Procedure over USB

1. Locate the Option Upgrade Entitlement Certificate (5964-5178) from the kit.

2. Redeem the Option Upgrade Entitlement Certificate by following the instructions on the

Certificate.

3. After redeeming your Option Upgrade Entitlement Certificate you will receive an email with an

attached License File.

4. Locate a USB storage device. Perform a virus check on this device before use.

5. Save the License File to the root directory of the USB Storage Device.

6. Connect the USB Storage Device to the signal analyzer USB port. Windows will detect the new

hardware and may display the configuration menu shown in Figure 1. This menu may be

configured according to your preferences.

Figure 1 USB Storage Device Configuration Menu

7. The signal analyzer will automatically consume the License File. (This may take a few minutes)

When the License File is consumed the Keysight License Manager will display a “Successful

License Installation” message similar to the one shown in Figure 2.

Figure 2 Successful License Installation

6Installation Note N9030-90076

85 MHz to 160 MHz Analysis Bandwidth Retrofit Kit

Alternate Installation Procedure

The License File can be manually installed over USB or LAN by placing the license file in the

following folder on the signal analyzer

C:\Program Files\Agilent\licensing

Verify the Installation

1. Cycle power on the signal analyzer.

2. Press System, Show System to display a list of installed options.

3. Verify that the newly installed options N9030B-B1X and N9030B-B1Y appear on the list.

Functional Test

1. Tap the message balloon at the bottom of the main display. Tap Clear Message Queue. This

will remove out-of-date errors.

2. Press System, Alignments, Align Now, Align Now All.

3. Watch for any errors during the instrument alignment.

4. Tap the message balloon at the bottom of the main display to view the instrument error log.

5. Verify that there were no errors during the alignment.

Optional Information

Select the 160 MHz IF Path.

1. Press MODE/MEAS, I/Q Analyzer (Basic), OK.

2. Press MEAS SETUP.

3. Press IF Path, IF Path.

4. The various IF path selections appear on the softkeys. Verify 160 MHz is present.

Installation Note N9030-90076 7

85 MHz to 160 MHz Analysis Bandwidth Retrofit Kit

Utilities, Adjustments, and Performance Verification Tests

Calibration Software and specified test equipment is required to perform the adjustments, and can

be used to automate the performance verification testing. Information on how to obtain this

software can be found at

http://www.keysight.com/find/calibrationsoftware

Utilities Required

None

Adjustments Required

None

Performance Testing Required

— IF Frequency Response

—NoiseDensity

— Spurious Response

A full calibration is required to assure the instrument meets all specifications

The end user must ultimately determine whether they want a full calibration to be performed after

the installation of this upgrade or not. If a full calibration is required, arrangements regarding the

level of calibration must be made between the end user and the calibration provider.

For assistance, contact your nearest Keysight Technologies Sales and Service Office. To find your

local Keysight office access the following URL:

http://www.keysight.com/find/assist

This information is subject to change

without notice.

Edition 1, February 2016

N9030-90076

www.keysight.com

Andere Handbücher für N9030B

Inhaltsverzeichnis

Andere Keysight Messgerät Handbücher

Keysight

Keysight N9923A Bedienungsanleitung

Keysight

Keysight N1911A Betriebsanleitung

Keysight

Keysight U1732C Bedienungsanleitung

Keysight

Keysight A Series Bedienungsanleitung

Keysight

Keysight U1190A Series Bedienungsanleitung

Keysight

Keysight E5052B Bedienungsanleitung

Keysight

Keysight N9030B Installations- und Betriebshandbuch

Keysight

Keysight u2722a Bedienungsanleitung

Keysight

Keysight B2900A Bedienungsanleitung

Keysight

Keysight E4991B Bedienungsanleitung

Keysight

Keysight 11590B Service-Handbuch

Keysight

Keysight M8131A Bedienungsanleitung

Keysight

Keysight x-series Bedienungsanleitung

Keysight

Keysight PNA-X Series Bedienungsanleitung

Keysight

Keysight N9068A Bedienungsanleitung

Keysight

Keysight N5227A Bedienungsanleitung

Keysight

Keysight N9010B Bedienungsanleitung

Keysight

Keysight M9614A Benutzerhandbuch

Keysight

Keysight Y1301A Bedienungsanleitung

Keysight

Keysight 16900 series Bedienungsanleitung

Keysight

Keysight x series Bedienungsanleitung

Keysight

Keysight PNA-X N5241A Installations- und Betriebshandbuch

Keysight

Keysight U1461A Bedienungsanleitung

Keysight

Keysight u2722a Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung