Keysight X series Installations- und Betriebshandbuch

Option ERC

External Reference Coupling

Keysight X-Series Signal Analyzers

Installation Note

Notice: This document contains references to Agilent.

Please note that Agilent’s Test and Measurement

business has become Keysight Technologies. For

more information, go to www.keysight.com.

Notices

The information contained in this document is subject to change without notice.

Keysight Technologies makes no warranty of any kind with regard to this material, including but

not limited to, the implied warranties of merchantability and fitness for a particular purpose.

Keysight Technologies shall not be liable for errors contained herein or for incidental or

consequential damages in connection with the furnishing, performance, or use of this material.

Manual Part Number

N9020-90180

Edition

Edition 1, May 2015

Printed in USA/Malaysia

Published by:

Keysight Technologies, Inc.

1400 Fountaingrove Parkway

Santa Rosa, CA 95403

Installation Note N9020-90180 3

Option ERC - External Reference Coupling Installation Kit

Introduction

This kit contains all of the instructions required to install Option ERC on an Keysight X-Series Signal

Analyzers. No tools are required.

Products Affected: CXA N9000A

EXA N9010A

MXA N9020A

PXA N9030A

Serial Numbers: All

To Be Performed By: (X) Keysight Service Center

(X) Personnel Qualified by Keysight

(X) Customer

Estimated Installation Time:

Estimated Adjustment and Verification Time:

0.5 Hours

1. The signal analyzer being upgraded with this option must have software

version A.02.00 or newer. To verify that the current version meets this

requirement, press System, Show, System and look for the “Instrument S/W

Revision”.

The latest revision of the X-Series Signal Analyzers software may be

downloaded from

http://www.keysight.com/find/xseries_software.

If a software update is required, you MUST follow the procedure in this

document for redeeming and installing of the option upgrade license key,

BEFORE attempting the software update.

2. This option is licensed for one instrument model/serial number

combination. The license key will only install on the designated

instrument.

4Installation Note N9020-90180

Option ERC - External Reference Coupling Installation Kit

Contents

Tools Required

— Personal computer with internet access and USB port

— USB storage device with > 2 GB free memory

Installation Procedure over USB

1. Locate the Option Upgrade Entitlement Certificate (5964-5178) from the kit.

2. Redeem the Option Upgrade Entitlement Certificate by following the instructions on the

Certificate.

3. After redeeming your Option Upgrade Entitlement Certificate you will receive an email with an

attached License File.

4. Locate a USB storage device. Perform a virus scan on this device before use.

5. Save the License File to the root directory of the USB storage device.

6. Connect the USB storage device to the signal analyzer USB port. Windows will detect the new

hardware and may display the configuration menu shown in Figure 1. This menu may be

configured according to your preferences.

Figure 1 USB Storage Device Configuration Menu

Quantity Description Keysight Part

Number

1 Installation Note This note

1 Option Upgrade Entitlement Certificate 5964-5178

Installation Note N9020-90180 5

Option ERC - External Reference Coupling Installation Kit

7. The signal analyzer will automatically consume the License File. (This may take a few minutes)

When the License File is consumed the Keysight License Manager will display a “Successful

License Installation” message as shown in Figure 2.

Figure 2 Successful License Installation

Alternate Installation Procedure

The License File can be manually installed over USB or LAN by placing the license file in the

following folder on the signal analyzer

C:\Program Files\Agilent\licensing

Verify the Installation and Instrument Software Version

1. Press System, Show, System to display a list of installed options.

2. Verify that the newly installed option number appears on the list.

3. Verify that the “Instrument S/W Revision” meets the requirements outlined in the

note on page 3 of this document.

6Installation Note N9020-90180

Option ERC - External Reference Coupling Installation Kit

Utilities, Adjustments, and Performance Verification Tests

Utilities Required

None

Adjustments Required

None

Performance Testing Required

None

For assistance, contact your nearest Keysight Technologies Sales and Service Office. To find your

local Keysight office access the following URL, or if in the United States, call the following

telephone number:

http://www.keysight.com/find/assist

1-800-829-4444 (8 am - 8 pm ET, Monday - Friday)

This information is subject to change

without notice.

Edition 1, May 2015

www.keysight.com

Andere Handbücher für x series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Keysight Messgerät Handbücher

Keysight

Keysight M9601A Benutzerhandbuch

Keysight

Keysight U1401B Bedienungsanleitung

Keysight

Keysight N9010B EXA Installations- und Betriebshandbuch

Keysight

Keysight 478A Service-Handbuch

Keysight

Keysight N2791A Bedienungsanleitung

Keysight

Keysight x-series Service-Handbuch

Keysight

Keysight M9203A Benutzerhandbuch

Keysight

Keysight N9923A Bedienungsanleitung

Keysight

Keysight U1731C Bedienungsanleitung

Keysight

Keysight x series Bedienungsanleitung

Keysight

Keysight FieldFox Bedienungsanleitung

Keysight

Keysight E4416A Bedienungsanleitung

Keysight

Keysight M9703A Series Kurzanleitung

Keysight

Keysight E5071C Bedienungsanleitung

Keysight

Keysight B2900A Bedienungsanleitung

Keysight

Keysight U8903B Bedienungsanleitung

Keysight

Keysight N5244AU-940 Bedienungsanleitung

Keysight

Keysight U1190A Series Bedienungsanleitung

Keysight

Keysight N9000A Bedienungsanleitung

Keysight

Keysight x series Kurzanleitung

Keysight

Keysight N2804 Bedienungsanleitung

Keysight

Keysight N7744A Bedienungsanleitung

Keysight

Keysight U8903B Bedienungsanleitung

Keysight

Keysight x-series Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung

Keysight x series Installations- und Betriebshandbuch

Beliebte Messgerät Handbücher anderer Marken