Kichler Lighting Seaside Bedienungsanleitung

3EASIDE4-

+ICHLER,IGHTING

%AST0LEASANT6ALLEY2OAD

0/"OX

#LEVELAND/HIO

#USTOMER3ERVICE



!-TO0-%34

-ONDAY&RIDAY

!+ICHLER/UTDOOR ©CEILINGFAN

$ESIGNEDTOCOORDINATEWITHAPOPULAR+ICHLER,IGHTINGCOLLECTION

)NSTRUCTION-ANUAL

KHA9090112

1. To reduce the risk of electric shock, insure

electricity has been turned off at the circuit

breaker or fuse box before beginning.

2. All wiring must be in accordance with the

National Electrical Code and local electrical

codes. Electrical installation should be

performed by a qualified licensed

electrician.

3. WARNING: Suitable for use with solid-

state speed controls.

4. WARNING: To reduce the risk of personal

injury, use only the two steel screws (and

lock washers) provided with the outlet box

for mounting to the outlet box. Most outlet

boxes commonly used for the support of

lighting fixtures are not acceptable for fan

support and may need to be replaced,

consult a qualified electrician if in doubt.

5. The outlet box and support structure must

be securely mounted and capable of

reliably supporting a minimum of 50

pounds. Use only CUL Listed outlet boxes

marked "FOR FAN SUPPORT".

6. The fan must be mounted with a minimum

of 7 feet clearance from the trailing edge of

the blades to the floor.

7. To operate the reverse function on this fan,

press the reverse button while the fan is

running.

8. Avoid placing objects in the path of the

blades.

9. To avoid personal injury or damage to the

fan and other items, be cautious when

working around or cleaning the fan.

10. Do not use water or detergents when

cleaning the fan or fan blades. A dry dust

cloth or lightly dampened cloth will be

suitable for most cleaning.

11. After making the electrical connections,

spliced conductors should be turned

upward and pushed carefully up into outlet

box. The wires should be spread apart with

the ground wire and white (common) wire

to one side with the black (load) wire to the

other side of the outlet box.

12. Electrical diagrams are reference only.

Light kits that are not packed with the fan

must be CUL Listed and marked suitable

for use with the model fan you are

installing. Switches must be CUL General

Use Switches. Refer to the Instructions

packaged with the light kits and switches

for proper assembly.

WARNING

/"Ê,1Ê/Ê,-Ê"Ê,]Ê/,Ê-"Ê

",Ê*,-" Ê 1,9]Ê"1 /Ê Ê/"Ê"1//Ê

"8Ê,Ê¸*/Ê",Ê Ê

-1**",/¸°

WARNING

/"Ê,1Ê/Ê,-Ê"Ê*,-" Ê 1,9]Ê

"Ê "/Ê Ê/ÊÊ,/-Ê-"Ê

,,,Ê/"Ê-Ê -®Ê1, Ê--9Ê

",Ê/,Ê -//" °Ê"Ê "/Ê -,/Ê

"/-Ê Ê/Ê*/Ê"Ê/Ê-°

1. SAFETY RULES

Special Notice

This appliance is equipped with a "Wattage

Limiting Device" required by the United

States Department of Energy. The device

has been installed at the factory and can not

be removed.

Installing Lamps in excess of 190 total watts

will disable the unit's light fixture. If this

should happen, you will need to reset the

lighting fixture by turning the power off to

the ceiling fan and/or light fixture,

reinstalling lamps totaling less that 190

watts and then turning the power back on.

3. PACKAGE CONTENTS

Unpack your fan and check the contents. You

should have the following items:

Philips screw driver

Slot screw driver

11 mm wrench

Step ladder

Wire cutters

2. TOOLS AND MATERIALS REQUIRED

SeasideTM

a. Mounting Bracket (1)

b. Canopy (1)

c. Canopy Décor (1)

d. Ball/Downrod Assembly (1)

& Extra Downrod (1)

e. Coupling Cover (1)

f. Fan Assembly (1)

g. Fan Blades (5)

h. Switch housing assembly (1)

i. Coupling Cover (1)

j. Bulb (1)

k. Package Hardware

1) Mounting Hardware:

a. wood screws (2), flat washers(2),

screws(2),wire nuts(4)

2) Blade Attachment Hardware:

a. screws (16), flat washers(16),

fiber washers(16)

3) Blade bracket hardware:

a. screw (1)

4) Safety Cable Hardware:

a. wood screw (1), spring washer (1),

flat washer (1)

5) Balance Kit (1)

6) Fob (2)

4. MOUNTING OPTIONS

Secure the outlet box directly to the building

structure. Use appropriate fasteners and

building materials. The outlet box and its

support must be able to fully support the

moving weight of the fan (at least 50 lbs). Do

not use plastic outlet boxes.

Figures 1,2 and 3 are examples of different

ways to mount the outlet box.

NOTE: You may need a longer downrod to

maintain proper blade clearance when

installing on a steep, sloped ceiling. (Fig. 3)

Outlet box

Provide strong

support

Recessed

outlet box Ceiling

mounting

plate

Outlet box

Fig. 1

Fig. 3

Fig. 4

Outlet box

Fig. 2

If there isn't an existing UL ( CUL for Canadian

Installation) listed mounting box, then read the

following instructions. Disconnect the power by

removing fuses or turning off circuit breakers.

To hang your fan where there is an existing

fixture but no ceiling joist, you may need a

joist hanging bracket as shown in Fig 4.

Fig. 7

Fig. 5

Fig. 6

Set Screw

Canopy

Download

Motor Coupling

Washer

Set Screw

Fan Assembly

Lcok Pin

Hitch Pin

Cross Pin

Lock Pin

Hanger Ball

Screw

Downrod

Listed electrial

box

Washer

Mounting screw

Mounting bracket

SeasideTM

5. HANGING THE FAN

REMEMBER to turn off the power before you

begin.

Step 1. Pass the 120 volt supply wires from the ceiling

outlet box through the center of the ceiling mounting

bracket. (Fig. 5)

Step 4. Loosen the two set screws from the

coupling on top of the motor assembly. (Fig. 7)

Step 5. Carefully feed the electrical lead wires from

the fan up through the downrod. Thread the downrod

into the coupling until the hitch pin holes are aligned.

Next, replace the hitch pin and retaining clip.

Tighten both set screws. (Fig. 7)

To properly install your ceiling fan, follow the steps below.

Step 2. Attach the ceiling mounting bracket to the

outlet box using the screws and washers included

with the outlet box. (Fig. 5)

Step 3. Remove the hanger ball from the downrod

assembly by loosening the set screw, removing the

cross pin and sliding the ball off the rod. Remove

the hitch pin and retaining clip from the downrod

assembly. (Fig. 6)

Fig. 9

Registration slot

Check Tab

Ceiling Mounting

Bracket

Step 7. Now lift the motor assembly into

position and place the hanger ball into the

hanger bracket. Rotate motor assembly until

the “Check Tab” has dropped into the “Regis-

tration Slot” and seats firmly. (Fig. 9)

NOTE: The entire motor assembly should

not rotate if this is done correctly.

NOTE: Please make sure all set screws are

in place and tight before installation the

following steps.

Step 6. Slip the coupling cover, canopy décor

and canopy onto the downrod. Reinstall the

hanger ball onto the downrod and make sure

the cross pin is in place and the set screw on

hanger ball is tight. (Fig. 8)

Fig. 8

Canopy Decor

Canopy

Coupling

Coupling cover

Hanger ball

6. INSTALLATION OF SAFETY SUPPORT

( For Canadian Installation ONLY )

7. MAKE THE ELECTRIC CONNECTIONS

WARNING: To avoid possible electrical

shock, be sure electricity is turned off at the

main circuit breaker or fuse box before wiring.

A safety support cable is provided to help

prevent the ceiling fan from falling, please install

it as follows.

Step 1. Attach the provided wood screw and

washers to the ceiling joist next to the mounting

bracket but do not tighten. See Figure 10-1

Step 2. Adjust the length of the safety cable to

reach the screw and washers by pulling the

extra cable through the cable clamp until the

overall length is correct, put the end of the cable

back through the cable clamp, forming a loop at

the end of the cable. Tighten the cable clamp

securely. Now, put the loop in the end of the

safety cable over the wood screw and under the

washers. Tighten the wood screw secuely. (Fig.

10-2)

WARNING: If your house wires are different

colors than referenced in this manual, stop

immediately. A professional electrician is

recommended to determine proper wiring.

ALL electrical connections should be made with

the supplied WIRE NUTS. Make sure each

connection below is tight and secure.

Step 1. Connect the fan supply BLACK wire

and fan light supply BLUE wire to the BLACK

household supply wire as shown in Fig. 11.

Step 2. Connect the fan neutral WHITE wire to

the household neutral WHITE wire as shown in

Fig. 11.

Step 3. If your outlet box has a ground wire

(GREEN or bare copper) connect it to the fan

ground wire (GREEN); otherwise, connect the

ground wire on the hanging bracket to the fan

ground wire (GREEN).

WARNING: Be sure no bare wire or wire

strands are visible after making all connections.

Step 4. After making all of the above connect-

ing, spread them apart so the GREEN and

WHITE wire connections are on one side of the

outlet box and the BLACK and the BLUE wires

connections are on the other side. Now, push

the completed connections upward into the

outlet box.

Fig. 11

Fig. 10-1

Fig. 10-2

Safety Cable Cable Clamp

Wood Screw

Green or bare copper

(ground)

Green or bare copper

(ground)

White (neutral)

Fan Assembly

Outlex box

Black (hot)

Blue (for light)

Wood Screw

Outlet Box

Support Brace

Ceiling

Spring Washer

Flat Screw

SeasideTM



&IG

&IG

).34!,,).'4(%#%),).'#!./09

3TEP3LIDETHECANOPYUPTOCEILINGANDONTO

THETWOSCREWSONHANGERBRACKET2OTATETHE

CANOPYCLOCKWISEANDTIGHTENTHETWOSCREWS

.EXTWHILEHOLDINGTHECANOPYWITHONEHAND

SLIDETHECANOPYDÏCOROVERTHESCREWSAND

ROTATECLOCKWISEUNTILTIGHT

#ANOPY

#ANOPY#OVER

3ET3CREWS

(ANGERBRACKET

!44!#().'4(%&!.",!$%3

3TEP!TTACHTHEBLADETOTHEBLADEBRACKET

USINGTHESCREWSWASHERSANDFIBERWASHERS

ASSHOWNIN&IGURE3TARTSCREWINTO

BRACKET2EPEATFORTHETWOREMAININGSCREWS

3TEP-AKESURETHEBLADEISSTRAIGHTAND

TIGHTENEACHSCREWUNTILFIBERWASHERIS

SLIGHTLYCOMPRESSEDANDALLTHREESCREWSARE

SECURE&IG

3TEP2EPEATTHEPROCEDUREABOVEFOR

THEREMAININGBLADES

"LADE

3CREW

"LADE"RACKET

3TEP-AKESUREALLOFTHEELECTRICALCONNEC

TIONSARETUCKEDNEATLYINTOCEILINGOUTLETBOX

7!2.).' /NELASTTIMEMAKESURETHE

h#HECK4ABvATTHEBOTTOMOFTHEHANGERBRACKET

ISPROPERLYSEATEDINTHEh2EGISTRATION3LOTvON

THESIDEOFTHEHANGERBALLBEFOREATTACHINGTHE

CANOPYTOTHEBRACKET&AILURETOPROPERLYSEAT

THEh#HECK4ABvCOULDDAMAGETHEELECTRICAL

WIRESWHENTOCEILINGFANBLADEDIRECTIONIS

CHANGEDWHILETHEFANISRUNNING

./4% 9OUMAYNEEDTOADJUSTTHECANOPY

MOUNTINGSCREWSASNECESSARYUNTILTHECANOPY

ANDCANOPYCOVERHAVEASNUGFIT&IG

).34!,,).'4(%,)'(4"5,",)'(4+)4

&IG

&IG

./4%"EFORECONTINUINGMAKESURETHE

POWERISDISCONNECTEDBYTURNINGOFFTHE

CIRCUITBREAKEROFREMOVINGTHEFUSEATTHE

CIRCUITBOX

9/52.%7+)#(,%2#%),).'&!.)3./7

2%!$94/53%2%-%-"%24/2%34/2%

!,,0/7%2

3OCKET

"ULB &AN!SSEMBLY

3CREW

,IGHT+IT

0LUG

!-0CONNECTION

3TEP)NSTALLTHESINGLEWATT'5

,AMPBYINSERTINGTHETWOPOSTONTHELAMP

BASEINTOTHESLOTSINTHESOCKETBASEAND

ROTATINGCLOCKWISEUNTILSNUG

3TEP#ONNECTTHEELECTRICALWIREPLUGS

FROMTHELIGHTKITTOTHESAMECOLORPLUGFROM

THECEILINGFANBYPUSHINGTHEMTOGETHER

#ONNECTTHESQUARE!-0CONNECTORFROMTHE

CEILINGFANANDTHELIGHTKITBYMATCHUPTHE

COLORONTHESIDEOFTHECONNECTORANDTHEN

PUSHTHEMTOGETHERUNTILTHESNAPENGAGES

&IG

3TEP4UCKTHECONNECTIONSINTOTHEFAN

NEATLYANDTHREADTHELIGHTKITUPTOALIGNTHE

HOLESONTHELIGHTKITANDCEILINGFAN!NDTHEN

TIGHTENTHELIGHTKITSECURELYUSINGTHREESCREWS

PROVIDED



3EASIDE 4-



&IG

&IG

/0%2!4).').3425#4)/.3

0ULL#HAINSHORT

2EVERSE3WITCH

0ULL#HAINLONG

0ULL#HAIN

&OB

3TEP!TTACHETHEDECORATIVEPULLCHAINFOBSTO

THETWOPULLCHAINSCOMINGOUTOFTHELIGHTKIT

&IG

3TEP4HE,/.'%2PULLCHAINISFORMOTOR

SPEEDCONTROLANDITHASFOURPOSITIONS(IGH

-EDIUM,OWAND/&&0ULLINGTHEFOBONCEFOR

EACHPOSITION

3TEP4HE3(/24%.PULLCHAINISFORLIGHT

CONTROL0ULLTHEFOBONCETOSWITCHTHELIGHT

/.OR/&&

3TEPTHEBLACKSLIDESWITCHLOCATEDNEXTTO

THEGLASSGLOBECONTROLSTHEREVERSEFUNCTION

ONTHECEILINGFAN3LIDINGTHESWITCHONE

DIRECTIONWILLREVERSETHEDIRECTIONOFTHEFAN

BLADES

Inhaltsverzeichnis

Andere Kichler Lighting Lüfter Handbücher

Kichler Lighting

Kichler Lighting ZEUS KLF-ZEUS-60-WHT-BN Bedienungsanleitung

Kichler Lighting

Kichler Lighting Universal 3 Light Fitter Bedienungsanleitung

Kichler Lighting

Kichler Lighting True Bedienungsanleitung

Kichler Lighting

Kichler Lighting Arkwright Bedienungsanleitung

Kichler Lighting

Kichler Lighting Decor Dorset Bedienungsanleitung

Kichler Lighting

Kichler Lighting Starkk 330174OZ Bedienungsanleitung

Kichler Lighting

Kichler Lighting 52" RENEW DESIGNER Bedienungsanleitung

Kichler Lighting

Kichler Lighting 330015WH Bedienungsanleitung

Kichler Lighting

Kichler Lighting 330013 Bedienungsanleitung

Kichler Lighting

Kichler Lighting Bead Bedienungsanleitung

Kichler Lighting

Kichler Lighting 35152 Bedienungsanleitung

Kichler Lighting

Kichler Lighting 300395 Bedienungsanleitung

Kichler Lighting

Kichler Lighting Wilton Bedienungsanleitung

Kichler Lighting

Kichler Lighting Todo 330025 Bedienungsanleitung

Kichler Lighting

Kichler Lighting PINION 60 Bedienungsanleitung

Kichler Lighting

Kichler Lighting Emerson HIGH COUNTRY Bedienungsanleitung

Kichler Lighting

Kichler Lighting Sterling Manor Bedienungsanleitung

Kichler Lighting

Kichler Lighting Pacific Edge 300157 Bedienungsanleitung

Kichler Lighting

Kichler Lighting Harbour Walk Patio Bedienungsanleitung

Kichler Lighting

Kichler Lighting Chicago Bedienungsanleitung

Kichler Lighting

Kichler Lighting Botella Bedienungsanleitung

Kichler Lighting

Kichler Lighting BASICS PRO SELECT 330017MWH Bedienungsanleitung

Kichler Lighting

Kichler Lighting LYNDON Bedienungsanleitung

Kichler Lighting

Kichler Lighting 52 inch Colerne LED Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Hinkley

Hinkley HIGHLAND Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung