Kichler Lighting Humble 300415 Bedienungsanleitung

Product images may vary slightly from actual product.

60" Humble

INSTRUCTION MANUAL

Model# 300415

READ AND SAVE THESE INSTRUCTIONS REV 14-FEB-2022

2 | KICHLER.COM

Net Weight: 10.30 kgs (22.66 lbs)

Gross Weight 11.50 kgs (25.30 lbs)

TABLE OF CONTENTS

SAFETY RULES...........................................................4

TOOLS AND MATERIALS REQUIRED ...................6

PACKAGE CONTENTS...............................................6

MOUNTING OPTIONS...............................................7

HANGING THE FAN ...................................................8

INSTALLATION OF SAFETY SUPPORT................11

ELECTRICAL CONNECTIONS ..............................12

FINISHING THE INSTALLATION ...........................14

INSTALLING THE GLASS SHADE......................... 15

INSTALLING THE WALL CONTROL .....................16

CONTROL SYSTEM SET-UP ................................. 17

OPERATING INSTRUCTIONS................................ 17

TROUBLESHOOTING.............................................20

FCC INFORMATION .................................................21

60" Humble | 3

4 | KICHLER.COM

installation of this fan, a qualified licensed electrician is

strongly recommended.

5. All wiring must be in accordance with the National

Electrical Code ANSI/NFPA 70 and local electrical codes.

Electrical installation should be performed by a qualified

licensed electrician.

6. The outlet box and support structure must be securely

mounted and capable of reliably supporting a minimum

of 15.9 kg (35 pounds). Use only CUL Listed outlet boxes

marked “FOR FAN SUPPORT”.

7. WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC

SHOCK OR PERSONAL INJURY, MOUNT FAN TO

OUTLET BOX MARKED “ACCEPTABLE FOR FAN

SUPPORT”.

8. Avoid placing objects in the path of the blades.

9. To avoid personal injury or damage to the fan and other

items be cautious when working around or cleaning the

fan.

READ AND SAVE THESE INSTRUCTIONS

SAFETY RULES

WARNING: FOR CANADA, THIS FAN MUST BE SECURED DIRECTLY TO THE BUILDING STRUCTURE / CEILING JOIST.

DON’T SECURE THIS FAN TO AN OUTLET BOX.

1. CAUTION - RISK OF SHOCK-

Disconnect power at the main circuit breaker panel

or main fusebox before starting and during the

installation.

2. WARNING: This fixture is intended for installation in

accordance with the National Electrical Code (NEC)

and all local code specifications. If you are not familiar

with code requirements, installation by a certified

electrician is recommended.

3. WARNING: To reduce the risk of fire or electric shock,

use only the control provided with the fan.

4. WARNING: To reduce the risk of fire, electric shock,

or Personal Injury mount to an outlet box marked

“Acceptable For Fan Support of up to 15.9 kg (35 lbs)”.

For outlet box mounting, use mounting screws (and

lock washers) provided with the outlet box. Most

outlet boxes commonly used for the support of light

fixtures are not acceptable for fan support and may

need to be replaced. Due to the complexity of the

15. Electrical diagrams are reference only. Light kits that

are not packed with the fan must be Listed and marked

suitable for use with the model fan you are installing.

Switches must be General Use Switches. Refer to the

Instructions packaged with the light kits and switches

for proper assembly.

16. Note: “All set screws must be checked, and re-tightened

where necessary, before installation.”

10. Do not operate reversing switch white fan blades are

in motion. Fan must be turned o and blades stopped

before reversing blade direction.

11. CAUTION: The fan must be mounted with a minimum

of 2.1m (7 feet) clearance from the trailing edge of the

blades to the floor.

12. WARNING: make sure the power is disconnected

before cleaning your fan.

13. Do not use water or detergents when cleaning the fan

or fan blades. A dry dust cloth or lightly dampened

cloth will be suitable for most cleaning.

14. After making electrical connections, spliced

conductors should be turned upward and pushed

carefully up into outlet box. The wires should be

spread apart with the grounded conductor and the

equipment-grounding conductor on one side of the

outlet box and the ungrounded conductor on the

other side of the outlet box.

WARNING

TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE

BLADE BRACKETS DURING ASSEMBLY OR AFTER INSTALLATION.

DO NOT INSERT OBJECTS IN THE PATH OF THE BLADES.

SAFETY RULES

60" Humble | 5

6 | KICHLER.COM

TOOLS AND MATERIALS REQUIRED

PACKAGE CONTENTS

• Phillips Screwdriver

• Blade Screwdriver

• 11 mm Wrench

• Step Ladder

• Wire Cutters

Unpack your fan and check the contents . You should have the following items:

A. Fan blades (5)

B. Ceiling mounting bracket

C. Canopy

D. Canopy cover

E. Ball/downrod assembly

F. Coupling cover

G. Set of 5 blade bracket and

Pre-installed mounting screws

H. Fan motor assembly

I. LED module

J. Glass Shade

K. Package hardware

1) Safety cable hardware:

wood screw (1), flat washer (1)

2) Blade attachment hardware: screws

(22), washers (22)

3) Blade bracket attachment hardware:

screws (2)

4) Balance kit

5) Mounting hardware: wood screws(2),

flat washers(2), star washers(2),

wire nuts(3) screws(2)

L. Transmitter

M. Receiver

MOUNTING OPTIONS

If there isn’t an existing UL (cUL for Canadian Installation) listed

mounting box, then read the following instructions. Disconnect

the power by removing fuses or turning o circuit breakers.

Secure the outlet box directly to the building structure. Use

appropriate fasteners and building materials. The outlet box and

its support must be able to fully support the full weight of the fan

(up to 15.9 kg (35 pounds)). Do not use plastic outlet boxes.

Figures 1, 2 and 3 are examples of dierent ways to mount the

outlet box.

NOTE: If you are installing the ceiling fan on a sloped (vaulted)

ceiling, you may need a longer downrod to maintain proper

clearance between the tip of the blade and the ceiling. A minimum

clearance of 12" is suggested for optimal operation.

NOTE: Depending on the location you have selected for

installation, you may need to purchase and install a joist hanger

for the support of the outlet box. Make sure the joist hanger you

purchase has been designed for use with ceiling fans. (Fig. 4)

Fig. 1

Outlet box

Fig. 2

Fig. 3

Fig. 4

Outlet box

Recessed

outlet box

Ceiling

mounting

plane

Provide strong

support

ANGLED CEILING

MAXIMUM 22° ANGLE

60" Humble | 7

8 | KICHLER.COM

HANGING THE FAN

REMEMBER to turn o the power. Follow the steps below to hang your

fan properly.

NOTE: This ceiling fan is supplied with one type of hanging assembly;

a standard ceiling installation using a downrod with ball and socket

mounting.

Step 1. Pass the 120-volt supply wires through the center hole in the ceiling

hanger bracket as shown in Fig. 5.

Step 2. Secure the hanger bracket to the ceiling outlet box with the screws

and washers provided with your outlet box.

Fig. 5

Hook

Washers

Mounting screws

(supplied with electrical box)

Ceiling

Mounting

Bracket

cULus Listed

Electrical

Box

120V Wires

HANGING THE FAN(CONTINUED)

Standard Ceiling Installation

Step 3. Press canopy cover into the holes on the bottom of canopy in place (Fig 6).

Step 4. Loosen 3 screws from the wire plate (Fig. 7)

Step 5. Attach the fan blade (Fig. 8)

Caution: Remove the styrofoam blocks under the wire plate and clean up any

residue in motor housing before starting installation.

A. Fasten the blade bracket to motor using pre-installed mounting screws

through the hole on wire plate.

B. Attach the blade to the blade bracket using the screws and washers as

shown in Fig 8. Start screw into bracket. Repeat for the remaining screws.

C. Make sure the blade is straight and tighten each screw.

Step 6. Remove the hanger ball from the downrod assembly by loosening the set

screw, unscrewing and removing the cross pin and unscrewing the ball o the rod.

(Fig. 9)

Step 7. Loosen the two set screws and remove the hitch pin and retaining clip from

the coupling on the top of the motor assembly. (Fig. 10)

Fig. 6

Fig. 7

Fig. 8

Canopy

Canopy Cover

Screws

Fiber Washers

Blades

Bracket

60" Humble | 9

10 | KICHLER.COM

HANGING THE FAN (CONTINUED)

Step 8. Slip the coupling cover, canopy cover and canopy onto the downrod. (Fig.

11)

Thread the hanger ball onto the downrod, insert the cross pin through the

downrod and tighten. Tighten the set screw.

Step 9. Lift the motor assembly into position and place the hanger ball into the

ceiling mounting bracket.

Step 10. Tighten three set screws on coupling cover firmly (Fig. 12)

Rotate the entire assembly until the check tab has dropped into the registration

slot and seats firmly. (Fig. 13)

The entire motor assembly should not rotate (left or right) when seated properly.

WARNING: Failure to reattach the cross pin and seat the check tab can cause

the fan to fall from the ceiling during operation. Take special care to make sure

this pin is reattached.

Fig. 9 Fig. 10 Fig. 13

Fig. 12

Fig. 11

Cross Pin

Hanger Ball

Downrod

Set Screw

Supply Wire

& Safety Cable

Downrod

Set Screws

Hitch Pin Coupling

Set Screws

Retaining Clip

Registration Slot

Downrod

Ceiling Canopy

Coupling Cover

Canopy Cover

Ball

Screws

Coupling

Downrod

Supply Wire & Safety Cable

Hanger Ball

Cross Pin

Set Screws

Canopy

Canopy Cover

Coupling Cover

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Kichler Lighting Lüfter Handbücher

Kichler Lighting

Kichler Lighting Cameron Bedienungsanleitung

Kichler Lighting

Kichler Lighting Lucia Bedienungsanleitung

Kichler Lighting

Kichler Lighting Vassar 330002OZ Bedienungsanleitung

Kichler Lighting

Kichler Lighting 300260/60-GENT Series Bedienungsanleitung

Kichler Lighting

Kichler Lighting HATTERAS BAY PATIOLED 60" Bedienungsanleitung

Kichler Lighting

Kichler Lighting Canfield Bedienungsanleitung

Kichler Lighting

Kichler Lighting Starkk Bedienungsanleitung

Kichler Lighting

Kichler Lighting Selectlight fixture Bedienungsanleitung

Kichler Lighting

Kichler Lighting LYNDON Bedienungsanleitung

Kichler Lighting

Kichler Lighting Vinea 52 Bedienungsanleitung

Kichler Lighting

Kichler Lighting Bellamy Bedienungsanleitung

Kichler Lighting

Kichler Lighting Lyndon 300120 Bedienungsanleitung

Kichler Lighting

Kichler Lighting 330013 Bedienungsanleitung

Kichler Lighting

Kichler Lighting Almere Bedienungsanleitung

Kichler Lighting

Kichler Lighting Bentzen Bedienungsanleitung

Kichler Lighting

Kichler Lighting Meredith Bedienungsanleitung

Kichler Lighting

Kichler Lighting Canfield 300117WH Bedienungsanleitung

Kichler Lighting

Kichler Lighting Eris Bedienungsanleitung

Kichler Lighting

Kichler Lighting Arkwet Patio Bedienungsanleitung

Kichler Lighting

Kichler Lighting FRYST Bedienungsanleitung

Kichler Lighting

Kichler Lighting Wilton Bedienungsanleitung

Kichler Lighting

Kichler Lighting Saxon Premier Bedienungsanleitung

Kichler Lighting

Kichler Lighting 330015WH Bedienungsanleitung

Kichler Lighting

Kichler Lighting 52" Chiara LED Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung