Kitsound SLAM Bedienungsanleitung

1 1

kitsound.co.uk

JB. 3083 / Made in China. © KitSound™ 2014. Christchurch, Dorset. BH23 4FL

USER MANUAL

SLAM

WIRELESS SPEAKER

We are craftspeople. We are musicians. We are KitSound™

And we all commit ourselves to achieving one shared goal: Bringing

people closer to their music. By truly understanding music we stay true

to its craft. Pure, rich, incredible sound. We’ll settle for nothing less.

At KS we believe your music deserves to be showcased on great

quality products that don’t cost the earth. We might not all share

the same taste in music (the ferocious disputes on music forums

prove that), but whether it’s Irish folk, death metal or any number

of obscure genres which seem to be multiplying by the minute, the

artists responsible for connecting with you through their craft have

bared their souls to do so. And we think that’s worth celebrating.

6 7

Like the musicians we’re honouring, we’re obsessed with our craft;

ﬁne-tuning and tweaking our products to make sure we constantly

deliver full-bodied, symphonic sound. So from a single note played

on a piano, to the full impact of a bass guitar, you can rest assured

that you’ll always be doing justice to your music.

8 9

Please read this manual carefully before use.

Box contents

• Slam portable speaker

• Mains AC adaptor

• Aux cable

• User manual

Functions

On the front:

1. Power light (red/green)

2. Bluetooth light (blue)

3. Volume down button ( )

4. Volume up button ( )

5. Bluetooth/Play/Pause button ( )

6. Power button ( )

On the back:

7. DC 5 V input

8. Aux-in

9. USB 1 A output

10. Battery door

11. DC/BATT switch

Model no.: KSSLAM

Bluetooth speaker

DC Output: 5 V

DC input: 5 V / 3 A

Made in China

SLAM

7 9

11 8

3 4 5 6

Instructions for use

• Firstly, you will need to plug the Slam into the mains using the supplied power adaptor. Make sure the

mains plug is connected to the DC 5 V input (7)

• Alternatively, the Slam can be powered by 3 x C size batteries. Slide open the battery door and insert

the batteries, observing the correct polarity, then re-ﬁt the battery door

• Please make sure the DC/BATT switch (11) is in the correct position depending on whether you wish

to use mains or battery power

• When you have ﬁnished using the Slam in battery mode, ensure you slide the switch to DC power,

otherwise the batteries will drain when not in use

Note: Please use only non-rechargeable C size batteries. Rechargeable C size batteries may not provide

a high enough voltage to power the Slam. Also, they cannot be recharged by the Slam.

10 11

Bluetooth setup

Pairing a Bluetooth device for the ﬁrst time

With the mains plug connected and/or batteries inserted:

1. Press (don’t hold) the power button (6)

2. The power light (1) will turn from red to green and the Bluetooth light (2) will ﬂash slowly

3. Press and hold the Bluetooth/Play/Pause button (5) for up to 5 seconds and the Bluetooth light (2)

will ﬂash quickly

4. Using the controls on your Bluetooth device, select the ‘Slam’ in your Bluetooth settings to pair

Note: If your device requests a password, enter ‘0000’.

Note: Refer to your device’s user manual for instructions on pairing and connecting Bluetooth devices.

5. When connected, the Slam will beep and the Bluetooth light (2) will turn solid

Note: After initial pairing, the unit will stay paired unless it is unpaired manually by the user or

erased due to a reset of the device. If your device should become unpaired, follow the directions

in the ‘Re-pairing or pairing new devices’ section.

Re-pairing or pairing new devices

1. Make sure Bluetooth is turned off on any previously paired devices

2. Press (don’t hold) the power button (6) on the Slam

3. After 5 seconds, press and hold the Bluetooth/Play/Pause button (5) for up to 5 seconds and the

Bluetooth light (2) will ﬂash quickly

4. Using the controls on your Bluetooth device, select the ‘Slam’ in your Bluetooth settings to pair

Note: If your device requests a password, enter ‘0000’.

5. When connected, the Slam will beep and the Bluetooth light (2) will turn solid

Using Bluetooth

Playing audio wirelessly

1. Follow the instructions in the ‘Pairing a Bluetooth device’ section

2. Use the controls on your device to select a track

3. To play, pause or skip the selected track, use the controls on your device or press the

Bluetooth/Play/Pause (5) button on the Slam

4. To skip a track, you will have to do so on your device

5. Audio played on the connected Bluetooth device will now be heard through the speakers

6. The volume can be adjusted on both your device and the Slam

12 13

Charging

Charging a device

1. Make sure the Slam is plugged into the mains, as this function will not work when using battery power

to operate the Slam

2. Using the appropriate USB charge cable, connect one end to the device and the other to the USB port

on the Slam

Note: The USB output is not suitable for use with any device that requires more than 1 amp to charge

3. Your device will now be charging

Aux audio input

Using the aux audio input

1. Plug one end of an aux cable (not included) into the aux input on the Slam

2. Plug the other end of the cable into the audio output/headphone output on an MP3 player

or other audio source

3. Press (don’t hold) the Power button (6) to turn the unit on (if not on already)

4. The power light will be green and the Bluetooth light (2) should not be ﬂashing

5. Audio played on the connected device will now be heard through the speaker

6. The volume can be adjusted on both your device and on the Slam

Note: Any audio being played on a connected Bluetooth device will cease once the aux audio

source is connected.

Note: The play/pause function on the Slam will not operate in aux mode.

PLEASE NOTE:

Your device will have an internal ampliﬁer and if it is playing digital ﬁles like MP3s it will also have

an integrated DAC (Digital Audio Converter). If you turn up the volume to 100%, your device will be

sending distorted signals to the Slam. To avoid this and to get the best sound quality from the speaker,

we recommend that you do not run your device any higher than 95% volume.

14 15

Speciﬁcations

Troubleshooting

We hope you’ve now got all the information you need to get started, but if you’re having problems

with anything, please feel free to contact us at: support@kitsound.co.uk

Bluetooth V2.1 A2DP, AVRCP

Bluetooth range up to 10 m

Aux input 3.5 mm

Output RMS 6 W x 2

Frequency response 100 Hz – 20 kHz

S/N 40 dB

USB output 1 A

DC input 5 V – 3 A

Battery type 3 x C size (1.5 V per cell)

Play time up to 20 hours (depending on battery)

We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of

product improvement and development.

Care for your Slam

Please DON’T

• Get the Slam wet

• Drop the Slam as this will invalidate your warranty

• Open up the Slam. There are no user serviceable parts inside

• Use any other mains adaptor than the one supplied

• Expose the Slam to extreme temperatures or rapid changes of hot to cold or vice versa

Please DO

• Clean the Slam with a soft dry cloth and no detergents

Inhaltsverzeichnis

Andere Kitsound Sprecher Handbücher

Kitsound

Kitsound KS DIGGIT Bedienungsanleitung

Kitsound

Kitsound SLAM 70 Bedienungsanleitung

Kitsound

Kitsound POCKETBOOM Bedienungsanleitung

Kitsound

Kitsound MINI MOVER 20 Bedienungsanleitung

Kitsound

Kitsound SLAM 2 Bedienungsanleitung

Kitsound

Kitsound Hive2o Bedienungsanleitung

Kitsound

Kitsound Sonar Bedienungsanleitung

Kitsound

Kitsound DANCEFLOOR Bedienungsanleitung

Kitsound

Kitsound SOUL 2 Bedienungsanleitung

Kitsound

Kitsound Glow Stereo Bedienungsanleitung

Kitsound

Kitsound GLOW Bedienungsanleitung

Kitsound

Kitsound CUBE Bedienungsanleitung

Kitsound

Kitsound SOUL Bedienungsanleitung

Kitsound

Kitsound hive evolution Bedienungsanleitung

Kitsound

Kitsound POCKETBOOM XB Bedienungsanleitung

Kitsound

Kitsound HIVE 2 Bedienungsanleitung

Kitsound

Kitsound KS SLAM XL Bedienungsanleitung

Kitsound

Kitsound Chorus Bedienungsanleitung

Kitsound

Kitsound MIAMI Bedienungsanleitung

Kitsound

Kitsound OVATION Bedienungsanleitung

Kitsound

Kitsound UPSTAGE Bedienungsanleitung

Kitsound

Kitsound FLAIR Bedienungsanleitung

Kitsound

Kitsound REUNION Bedienungsanleitung

Kitsound

Kitsound BOOGIE BUDDY Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung