Klein Tools ET300 Bedienungsanleitung

ENGLISH

Instruction Manual

 

 





 



 







ET300

Apo

Digital Circuit

Breaker Finder

Digital Circuit Breaker

Finder

ET300

TRANSMITTER

Digital Circuit Breaker

Finder

ET300

RECEIVER

Micro-Processor

Controlled





(Cat. No. 69411)

ET300





• 90 – 120V AC

• 50 – 60Hz

• Up to 1000 ft. (305 m)

• 32°F – 104°F (0°C – 40°C)

• 50%

• < 6562 ft. (2000 m)

• For indoor use only

•9 volt alkaline battery

• Approximately 4 minutes

• 2.8" x 1.9" x 1.2" (7.11 x 4.83 x 3.04 cm)

• 6.0" x 2.0" x 0.9" (15.24 x 5.08 x 2.29 cm)

• 1.6 oz. (45 g)

•3.2 oz. (91 g)

• Indication at 0.16" (4 mm) distance from a wire

carrying 120V AC.

• UL listed



To ensure safe operation and service of the tester, follow these instructions.

Failure to observe these warnings can result in severe injury or death.

• Understand the risks of working around live voltage.

• Turn off power before inspecting, applying, or removing

the transmitter (when using the optional 'Leads Adapter').

• Exercise extreme caution around live, bare wires, especially

in an open breaker panel.

• Consult with an experienced electrician when necessary.



Screw this adapter into an empty light socket.

Make sure the ﬁxture is live. Plug in the

transmitter and follow the instructions

starting at step 4.



Carefully attach leads to the correct wires.

Plug in transmitter to adapter. Follow the

instructions starting at step 4.

Exercise extreme caution around live wires.

Dig tal C rcu t B eaker

Finder

ET300

TRANSMITTER

99 Washington Street

Melrose, MA 02176

Phone 781-665-1400

Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com





1. Identify the wall outlet or ﬁxture for which the breaker must

be determined.

2. Safely check that the outlet or ﬁxture is live.

3. Plug in the transmitter. Its LED will light if it is receiving power.

4. Move to the breaker panel with the receiver.

5. Turn on the receiver by pressing, but not holding, the power button.

You will hear a beep and see its LED lit.

6. Position the receiver perpendicularly on the breakers in the panel

with the power button pointing up.

7. Slowly scan all breakers in the panel once. Ignore any beeps

or indications, as the receiver is learning the panel.

8. Scan all breakers a second time. This time, the receiver will beep

and illuminate the green arrow only at the correct breaker.

9. Power off the receiver by pressing and holding the power button.

Return to the outlet or ﬁxture and remove the transmitter.



Clean the instrument by using a damp cloth. Do not use abrasive cleaners

or solvents.



Remove the batteries when instrument is not in use for a prolonged period of

time. Do not expose to high temperatures or humidity. After a period of storage in

extreme conditions exceeding the limits mentioned in the Speciﬁcations section,

allow the instrument to return to normal operating conditions before using it.



Do not place equipment and its accessories in the trash. Items must

be properly disposed of in accordance with local regulations.

Digi al Circu t Breaker

Finder

ET300

Micro-Processor

Controlled

Digital Circuit Breaker

Finder

ET300

Digital Circu t Breaker

Finder

ET300

TRANSMITTER

Once plugged in, the LED

will light up when

socket is live

99 Washington Street

Melrose, MA 02176

Phone 781-665-1400

Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

Andere Handbücher für ET300

Andere Klein Tools Messgerät Handbücher

Klein Tools

Klein Tools 93LDM65 Bedienungsanleitung

Klein Tools

Klein Tools ET100 Bedienungsanleitung

Klein Tools

Klein Tools CL220 Bedienungsanleitung

Klein Tools

Klein Tools ET130 Bedienungsanleitung

Klein Tools

Klein Tools CL440 Bedienungsanleitung

Klein Tools

Klein Tools ET110 Bedienungsanleitung

Klein Tools

Klein Tools CL450 Bedienungsanleitung

Klein Tools

Klein Tools ET920 Bedienungsanleitung

Klein Tools

Klein Tools RT390 Bedienungsanleitung

Klein Tools

Klein Tools MM1300 Bedienungsanleitung

Klein Tools

Klein Tools ET140 Bedienungsanleitung

Klein Tools

Klein Tools ET920 Bedienungsanleitung

Klein Tools

Klein Tools CL200 Bedienungsanleitung

Klein Tools

Klein Tools CL800 Bedienungsanleitung

Klein Tools

Klein Tools CL3000 Bedienungsanleitung

Klein Tools

Klein Tools CL450 Bedienungsanleitung

Klein Tools

Klein Tools CL2200 Bedienungsanleitung

Klein Tools

Klein Tools VDV500-051 Bedienungsanleitung

Klein Tools

Klein Tools MM2000 Bedienungsanleitung

Klein Tools

Klein Tools CL120KIT Bedienungsanleitung

Klein Tools

Klein Tools CL380 Bedienungsanleitung

Klein Tools

Klein Tools ET300 Bedienungsanleitung

Klein Tools

Klein Tools 935DAGL Bedienungsanleitung

Klein Tools

Klein Tools VDV Scout Pro 2 LT Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung