Kohler C3-225 K-4736T-0 Bedienungsanleitung

上海科勒电子科技有限公司

上海市浦东新区金滇路18号E幢邮编：201206

K-4736T

English page 1-10

中文页码　11-18

1103349-T01-B

on the product surface. Please ensure sufficient ventilation in your

surroundings to prevent possible damage to electronic components.

Masonry Drill Screw drivers

1103349-T01-B

Kohler Co.

1103349-T01-B

1. Match toilet roughing-in requirement and installation tips

1 Distance between installation holes: 136-140mm

2 Distance between instalaltion holes and tank front rim: >20mm

3 Distance between instalaltion holes and bowl inner rim: 70mm

4 Distance between installation holes and tank top rim: 460-490mm

5 Bowl inner diameter: 370-390mm

6 Reserve place around 1 meter away from the toilet before installation

It is recommended to use water-resistant socket.Do not use an

extension code with the product.

Ensure that there are no obstacles within 40cm in front of the toilet.

1103349-T01-B

Kohler Co.

1103349-T01-B

Kohler Co.

NOTE! For those newly installed G 1/2 hose, before the inlet

hose connected to T-valve, must flush for several seconds to clean

the inner side of the pipe, in order to remove the dirt and debris etc.

G 1/2 Hose

Kohler Co.

1103349-T01-B

7. Installation of Remote Controller Holder

Choose a mounting location for the remote holder that is easily

accessible while sitting on the seat.

Drilling two holes with depth larger than 45mm on the wall by drill with

a diameter of 6mm in accordance with the position of screw holes on

the remote control holder. Installing the expansion tube into the holes.

Placing the installation holder on the fixing hole.

Peeling off the release paper of double-sided tape at the back of holder.

Fixing the holder with screws and install it.

Installing the screw covers on the screws.

Placing the remote controller on the

holder.

Installation Step：

NOTE: if the wall for installation is made of

special material (such as wood board,

density board and etc.), suitable fixing

methods shall be adopted.

＞45mm

6mm

Expansion

Tube

Remote Holder

Double-Sided

Tape

Expansion

Screw

Screw CoverRemote

Controller

1103349-T01-B

Kohler Co.

Remove the tank cover.

Place flushing actuator above the sealed

floating ball in the tank.

NOTE: When installing the flushing actuator, you can

adjust the position of stainless steel so as to fit the tank cover properly.

Connect the salient point of the rotary table on “flushing actuator” and

the hang clasper on the “sealed floating ball” with “metal chain”.

NOTE: 1. Buckling and hanging points on the “sealed floating ball”

shall be near to the floating ball.

2. Twining on the primary manually lifting and pulling metal strip is not

allowed.

3. When installing the metal chain, you need to adjust the length of the

chain tailored to tank mechanism(Adjust S-hook to the proper position

in the chain, ensuring the chain is fully stretched and locked straight by

S-hook).

Rotate the auto flush dial manually. Ensure the dial can lift up the

sealing float completed in the rotation to achieve best flushing effect.

Press key

to double confirm the flushing mechanism works smoothly.

Cover the tank cover properly.

8. Installation of flushing actuator

Flushing

actuator

Rotary table

Sealed floating

ball

Metal chain

Tank cover

Flushing

actuator

Sealed floating

ball

Bump

Stainless steel

S-hook

Kohler Co.

1103349-T01-B

Clip

Plug in the power cord and press the power button.

Verify the auto cover turning and flushing functions (refer to the

homeowner’s guide).

Place one piece of dampened cloth or wet tissue in the seat inductive

area to imitate the status of seat taking; Verify the function of flushing

(refer to the homeowner’s guide).

Make sure to take away the cloth or tissue in the seat inductive area after

normality confirmation.

1103349-T01-B

Kohler Co.

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler Avid K-97358-4-CP Bedienungsanleitung

Kohler

Kohler ATOM 28956X-4 Bedienungsanleitung

Kohler

Kohler K-15182 Montageanleitung

Kohler

Kohler K-170 Montageanleitung

Kohler

Kohler STRAYT 37331M Bedienungsanleitung

Kohler

Kohler K-877 Montageanleitung

Kohler

Kohler K-14402 Bedienungsanleitung

Kohler

Kohler Revival K-2950-1 Montageanleitung

Kohler

Kohler K-158 Bedienungsanleitung

Kohler

Kohler K-2268 Montageanleitung

Kohler

Kohler K-T16237 Bedienungsanleitung

Kohler

Kohler K-7259 Montageanleitung

Kohler

Kohler K-7341 Montageanleitung

Kohler

Kohler K-8549 Bedienungsanleitung

Kohler

Kohler K-7744 Bedienungsanleitung

Kohler

Kohler K-14675 Montageanleitung

Kohler

Kohler GANDIDE 11685T-4 Bedienungsanleitung

Kohler

Kohler Lyntier K-T10333 Montageanleitung

Kohler

Kohler K-19029 Bedienungsanleitung

Kohler

Kohler K-13108 Montageanleitung

Kohler

Kohler C3-050 Bedienungsanleitung

Kohler

Kohler K-2515 Montageanleitung

Kohler

Kohler K-7401 Montageanleitung

Kohler

Kohler Avid T97367-4-BN Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung