Kohler ESCALE K-19611T Bedienungsanleitung

-1-

ESCALE

INSTALLATION INSTRUCTIONS

VANITY TOP CABINET

K-19611T, K-15455T, K-19612T

BEFORE YOU BEGINBEFORE YOU BEGIN

IMPORTANT !

·Installer: This manual is the property of the customer and

must be retained with the product for maintenance and

operational purposes.

Cabinets are very heavy. Get help lifting and moving the

cabinets.

NOTE

Turn off the water supply.

The plumbing installation must comply with all local water

supply and building regulations.

Before installation carefully inspect the new fixture for any

signs of damage.

Ensure all required electrical work has been completed

before installing the furniture.

All information in these instructions is based upon the

latest product information available at the time of

publication. Kohler China reserves the right to make

changes in product characteristics, packaging, or

availability at any time without notice.

These instructions contain import care, cleaning, and

warranty information please leave these instructions for

the consumer.

Escale bathroom cabinet includes a series of washbasin

cabinet with visible surfaces of oak grain. The series

adopt E1 grade wood-based panel of high quality, and

with further processing, its harmful emissions will be less

than 1.5mg/L. Washbasin cabinets with single door and

double doors are available.

1.5mg/L

ORDERING INFORMATION

Escale Vanity Top Cabinet.........................................K-19611T

Bathroom Furniture Legs ..........................................K-15455T

Escale Vessel Cabinet RH ........................................K-19612T

This installation and user guide covers the installation of the

following for the Escale range:

..............................................K-19611T

................................................................K-15455T

( ) ....................................K-19612T

215500

, 2009

1038407-T01-D

-2-

SAFETY: WARNINGS

Kohler products are precision-engineered and should give

continued superior and safe performance, provided:

1. They are installed, commissioned, operated and

maintained in accordance with the recommendations given

in this Manual.

2. Periodic attention is given, as necessary, to maintain the

product in good functional order. Recommended guidelines

are given in the section.

Carefully inspect the new fixture for any signs of damage.

When installing Kohler Products, manufacturers guidelines for

power tool safety should be followed.

MAINTENANCE

ROUGHING-IN

Unit: mm

K-19611T

1000 355

510

K-19612T

510

500

1038407-T01-D

-3-

225

K-15455T

INSTALLATION

SPECIFICATION

Plumbing Connections

Hot (H) and Cold inlets must be connected to the correct

inlet pipes.

(H) (C)

()

Install the Plumbing

Install the drain in accordance with the manufacturer,s

instructions.

Make sure a watertight seal exists on all

basin drain connections.

Provide access to the plumbing connections

for future plumbing maintenance.

The hot and cold water supplies must be installed with

isolating valves.

Caution!

Note!

()

Install the Vanity Top Cabinet

1. Decide on the location of the cabinet, and mark the

dimensions of the wall hanging brackets to the dimensions

given.

Make sure that you avoid hidden cables and

pipes when you drill holes in the wall.

For the vanity top cabinet, make sure that you mark the

positions on the wall for the attachment bolts. (Refer to

countertop installation instructions for further information).

Caution!

Note!

1038407-T01-D

-4-

2. For installations, you must use suitable

attachment bolts and wall plugs to secure the unit to the wall.

Tighten bolts using an hexagonal wrench.

Solid Wall

360mm 280mm

957mm

20mm

510mm

236mm

661mm

()

(Inner Distance Between

Side Boards)

Vanity Top Cabinet

20mm

781mm

3. Using a suitable drill, drill the holes for the wall hanging

brackets. Secure the brackets to the wall with the

appropriate wall plugs and Screws.

510mm

1000mm

4. Carefully unscrew the doors from the cabinet, and lift the

doors off the hinges. Place the doors carefully to one side.

5. /

5. Fit the cabinet/basin unit in position on the wall, lifting it

over the wall hanging brackets.

1038407-T01-D

11.11. Adjust the screw at each end of the back panel until it is

upright.

-5-

12.

13.

12. Fit the shelf supports in position in the pre-drilled holes.

13. Fit the shelf.

14. /

14. Refit the cabinet/basin unit doors onto the hinges, and

tighten the screws. Ensure the doors are level, and adjust

the screws in the hinges Accordingly.

7. /

9. /

10.

6. Level the cabinet by adjusting the adjustment screws. The

top screw will adjust the cabinet vertically, and the bottom

screw will adjust it horizontally.

7. Ensure the vanity top is seated in the correct position and

is secure.

8. Use a spirit level to ensure the cabinet is level.

9. Place the basin in the desired position on the cabinet/basin

unit.

10. Install the back panel

1038407-T01-D

-6-

Install the Undermounted Unit

1. Decide on the location of the unit, and mark the

dimensions of the wall hanging brackets to the dimensions

given.

2. Use a spirit level to ensure the wall hanging brackets are

level.

510mm

236mm

661mm

20mm

457mm

20mm

()

(Inner Distance Between

Side Boards)

Caution!

Solid Wall

Make sure that you avoid hidden cables and

pipes when you drill holes in the wall.

3. For installations, you must use suitable

attachment boltsand wall plugs to secure the unit to the

wall. Tighten bolts using an hexagonal wrench.

4. Using a suitable drill, drill the holes for the wall hanging

brackets. Secure the brackets to the wall with the

appropriate wall plugs and screws.

1038407-T01-D

-7-

5. Carefully unscrew the doors from the undermounted unit,

and lift the doors from the hinges. Place the doors carefully

to one side.

6. Screw the attachment brackets into the required locations

in the undermounted unit. These brackets fit over the wall

hanging brackets to hold the unit in position.

7. Lift the undermounted unit into position on the wall, making

sure the attachment brackets fit into the wall hanging

brackets.

8. Secure the attachment brackets with the screws, and

adjust the screws accordingly until the unit is level. Use a

level to ensure the unit is level.

9. Install the back panel onto the undermounted unit, and

secure in postion with the screws. Adjust the screws to

make sure that the back panel is upright.

10. Apply a bead of silicone sealant aound the opening in the

top of the undermounted unit.

11. Place the washbasin into the opening, and press down

firmly into position.

12. Carefully remove any excess silicone sealant.

13. Refit the undermounted unit doors on the door hinges,

and ensure the doors are fitted scurely and are level.

10.

11.

12.

13.

1038407-T01-D

-8-

Finish the Installation

1. Fit the handles to vanity top cabinet, vanity basin unit,

undermounted unit and pedestal unit.

2. Place the handle on the front of the unit, and secure in

place using two screws.

3. Fit the tap to the basin in accordance with the

manufacturer,s instructions.

4. Connect the hot and cold water supplies.

5. Attach the waste, and tighten securely.

6. Open the hot and cold water valves, and check the supply

connections for leaks.

7. Run water into the basin, and check the drain connections

for leaks.

HOT COLD

1038407-T01-D

-9-

USER MAINTENANCEUSER MAINTENANCE

5. PU .

6. .

Cleaning

Caution! Risk of product damage. Many cleaners

contain abrasive and chemical substances, and should

not be used for cleaning stainless steel, enamel,

plated or plastic fittings. These finishes should be

cleaned using a mild washing up detergent or soap

solution, rinsed and then wiped dry with a soft clean

cloth.

5. The cabinet door and interior are constructed of mirror and

aluminum. Use only a damp cloth to clean. Spray the cloth,

not the mirror when cleaning. Mirrors are damaged by the

use of ammonia or vinegar based cleaners. Rubbing

alcohol can be used for stubborn stains.

6. Use no abrasive cleansers on any part of the cabinet.

7. The white frame should be cleaned with a damp cloth only.

8. If any fixtures caused by abnormal reasons, Kohler China

can supply paid replacement for service parts caused by

abnormal reasons as shown in the next page in the limited

duration of warranty.

Many cleansers contain abrasive and chemical substance

which is not suitable for cleaning stainless steel, enamel,

plating or plastic products. You may use mild cleansers or

soaps to clean the surfaces. Wipe any splashes of cleaner

solutions from the surface with clean soft cloth.

Maintain ventilation in the bathroom, and separate the dry

area from the damp one if conditions permit. Try to open

the door and windows of the bathroom and maintain good

ventilation.

Kohler bathroom cabinet are dealt with strict procedures

for damp-proof, whose good damp-proof function ensures

good performance even in bathroom of huge humidity. Yet

do not splash and pour water directly on the bathroom

cabinet. Make sure that the bathroom is not over damp

and wipe any splashes from surfaces immediately.

Maintenance of door board: Clean and wipe door board

regularly, and wipe the condensation vapor with dry and

soft cloth.

1038407-T01-D

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler K-5331T-S-0 Montageanleitung

Kohler

Kohler PURIST 10129T-4 Bedienungsanleitung

Kohler

Kohler URBANITY+ 23751Т-9 Bedienungsanleitung

Kohler

Kohler Moxie K-14292 Montageanleitung

Kohler

Kohler K-438 Montageanleitung

Kohler

Kohler Avid K-97358-4-CP Bedienungsanleitung

Kohler

Kohler K-T72771 Montageanleitung

Kohler

Kohler K-4917 Bedienungsanleitung

Kohler

Kohler K-8297TW-HC-0 Montageanleitung

Kohler

Kohler Rada Intelligent Care MX1 20 Bedienungsanleitung

Kohler

Kohler Rada T4 Series Bedienungsanleitung

Kohler

Kohler K-8549 Bedienungsanleitung

Kohler

Kohler Family Care 2.0 K-701646T-FM-SHP Bedienungsanleitung

Kohler

Kohler Revival K-2950-1 Montageanleitung

Kohler

Kohler K-7167 Montageanleitung

Kohler

Kohler K-146 Montageanleitung

Kohler

Kohler K-16230 Bedienungsanleitung

Kohler

Kohler Serif 5 BubbleMassage K-1337-G Bedienungsanleitung

Kohler

Kohler K-10094 Montageanleitung

Kohler

Kohler RiverBath Quadrangle K-1365-H2 Bedienungsanleitung

Kohler

Kohler K-9110 Montageanleitung

Kohler

Kohler K-4986X Montageanleitung

Kohler

Kohler Chablis K-2081 Bedienungsanleitung

Kohler

Kohler PureWarmth K-10349-96 Montageanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung