Kohler PureWarmth K-10349-96 Montageanleitung

Installation and Care Guide

Heated Seat with Nightlight

Français, page“ Français-1”

Español, pagina “Español-1”

K-10349

1347697-2-A

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS BEFORE

USING

When using electrical products, especially when children are present,

basic safety precautions should always be followed, including the

following:

IMPORTANT! Risk of product damage. Do not install this product

in a location exposed to excessive moisture where condensation

might form on the product surface. Provide adequate ventilation

when bathing to avoid damage to the electronic components due to

high humidity levels.

NOTE: The thermal protectors may trip during storage or

transportation in warm weather causing the unit to not operate.

Allow the unit to cool to room temperature before installation or

operation.

DANGER: To reduce the risk of electrocution:

Do not place or store this product where it can fall or be pulled

into a bath or sink.

Do not place in or drop into water or other liquid.

Do not reach for a product that has fallen into water. Unplug

immediately.

WARNING: To reduce the risk of burns, electrocution, ﬁre,

or injury to persons:

Close supervision is necessary when this product is used by or

near children, the elderly, or invalids. Adjust the temperature of

the seat for the elderly, those who are incapacitated, or persons

with sensitive skin.

Use this product only for its intended use as described in this

manual. Only use attachments recommended by Kohler Co.

Never operate this product if it has a damaged cord or plug, if it

is not working properly, if it has been dropped, damaged, or

dropped into water. Return the product for examination and

repair.

Keep the cord away from heated surfaces.

Never use while sleeping or drowsy.

1347697-2-A 2 Kohler Co.

IMPORTANT SAFEGUARDS (cont.)

Never drop or insert any object into any opening or hose.

Do not use outdoors or where aerosol spray products are being

used or where oxygen is administered.

Connect this product to a properly grounded outlet only. See the

“Grounding Instructions” section.

SAVE THESE INSTRUCTIONS

Before You Begin

WARNING: Risk of electric shock, ﬁre, or personal injury.

Connect only to a nominal 120 VAC, 60 Hz circuit protected

by a minimum 15 A Ground-Fault Circuit-Interrupter (GFCI)

or Residual Current Device (RCD).

WARNING: Risk of electric shock. Do not immerse or ﬂush

the product with water.

WARNING: Risk of product damage. Liquids can damage

electronic components. Avoid spraying, soaking, or

immersing the seat hinge.

IMPORTANT! The seat mounting holes on the toilet must be

accessible from the underside of the bowl to accommodate the toilet

seat cord. Some skirted toilets, where the mounting holes are not

accessible, will require an alternate mounting plate kit, 1362376 sold

separately

NOTICE: Do not use an extension cord with this product.

NOTE: The features for this product can be controlled from a

mobile device. Download the PureWarmth App and follow the App

instructions.

Observe all local electrical and building codes.

Install an electrical outlet within 4’ (1219 mm) of the toilet.

Kohler Co. 3 1347697-2-A

1. Install the Mounting Plate

Route the cord through the mounting hole on the toilet.

Position the mounting plate over the mounting holes.

Position the washers in the mounting plate with the ″+″oriented

toward the toilet tank.

Insert the bolts through the mounting plate and into the

mounting holes.

Washer

1347697-2-A 4 Kohler Co.

2. Secure the Mounting Plate

Attach the slotted nut onto the cord and slide up on the bolt.

Slide the other nut up on the other bolt.

Using the provided combination tool, tighten the bolts while

holding the nuts in place.

Slotted

Nut

Combination

Tool

Nut

Kohler Co. 5 1347697-2-A

3. Install the Seat

Align the holes in the seat hinge over the posts on the mounting

plate.

Press the seat down to click in place.

Seat Removal

Lift the lid and seat to the vertical position.

Press the side buttons and lift the seat off the mounting plate.

Seat Adjustment (If Needed)

Remove the seat from the mounting plate.

Loosen the bolts, and rotate the washers.

Retighten the bolts.

Reinstall the seat to the mounting plate.

1347697-2-A 6 Kohler Co.

4. Complete the Installation

WARNING: Risk of electric shock, ﬁre, or personal injury.

Connect only to a nominal 120 VAC, 60 Hz circuit protected

by a minimum 15 A Ground-Fault Circuit-Interrupter (GFCI)

or Residual Current Device (RCD).

If not already installed, install an electrical outlet within 4’ (1219

mm) of the toilet.

Thread the power supply cord onto the toilet seat cord. Tighten

the barrel.

Plug the power supply into the electrical outlet.

To begin using this product, refer to the quick start guide.

Care and Cleaning

For best results, keep the following in mind when caring for your

KOHLER product:

IMPORTANT! Do not immerse product in water.

•Always test your cleaning solution on an inconspicuous area

before applying to the entire surface.

•Use a soft, dampened sponge or cloth to wipe surfaces clean.

Remove the cleaner quickly after applying. Rinse and dry any

overspray that lands on nearby surfaces.

•Do not allow cleaners to soak on surfaces.

Kohler Co. 7 1347697-2-A

Care and Cleaning (cont.)

•Never use an abrasive material such as a brush or scouring pad

to clean surfaces.

For detailed cleaning information and products to consider, visit

kohler.com/clean. To order Care & Cleaning information, call

1-800-456-4537.

Range and Function Disclaimer

BLUETOOTH

is the name for a short-range radio frequency (RF)

technology that operates at 2.4 GHz. The effective range of most

BLUETOOTH mobile devices is 10 meters. BLUETOOTH is designed

for very low power use. The compatibility of the BLUETOOTH

ampliﬁer interface to mobile/portable devices differs according to the

various individual devices and, in particular, may vary with different

software versions for a device. The normal mobile device

BLUETOOTH range can be up to 10 meters, however, placement of

your mobile device and the BLUETOOTH ampliﬁer’s installation

environment will impact your reception range.

Water and walls can act as blocking agents to the BLUETOOTH signal

that your mobile device is using to broadcast to your BLUETOOTH

ampliﬁer. Therefore, selecting an installation location that removes

these range blocking obstacles will increase the effective range and

performance of your BLUETOOTH ampliﬁer.

You can test your BLUETOOTH reception by performing simple range

tests using your mobile device prior to performing a permanent

installation. The best way to make use of the short BLUETOOTH range

is to make sure your BLUETOOTH ampliﬁer is as close to the

BLUETOOTH transmitter (mobile phone, tablet, etc.) as possible. The

less distance between the two devices, the greater will be the reliability

of your BLUETOOTH audio signal, and the less distance means less

obstacles in the medium through which the transmission is passing, so

there is a reduced chance of audio signal loss.

The compatibility of the BLUETOOTH ampliﬁer to mobile/portable

devices differs according to the various individual devices and, in

particular, may vary with different software versions for a device. All

functions are based on industry-wide communications standards.

Compatibility between the BLUETOOTH ampliﬁer and mobile device

is therefore largely dependent upon the software version of the mobile

device. Other factors (e.g. installation location, walls, distance) mean

that in individual cases, sporadic impairment of functions may occur in

devices that otherwise function reliably. Not all functions are

supported in all countries.

1347697-2-A 8 Kohler Co.

Range and Function Disclaimer (cont.)

Because of these reasons, Kohler Co. can assume no guarantee for the

unlimited compatibility and functionality of your mobile device in

conjunction with the BLUETOOTH ampliﬁer.

_________________________________________________________________

The BLUETOOTH

word mark and logos are registered trademarks

owned by Bluetooth SIG, Inc. and any use of such marks by Kohler

Co. approved suppliers is under license. Other trademarks and trade

names are those of their respective owners.

Compliance

FCC ID: N82-KOHLER023

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including

interference that may cause undesired operation.

Changes or modiﬁcations not expressly approved by the party

responsible for compliance could void the user’s authority to operate

the equipment.

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one of

the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for

help.

Kohler Co. 9 1347697-2-A

Compliance (cont.)

RF Exposure Warning

This portable transmitter with its antenna complies with FCC’s RF

exposure limits for general population/uncontrolled exposure.

This device must not be co-located or operated in conjunction with any

other antenna or transmitter.

CANADA IC: 4554A-KOHLER023

This device contains licence-exempt transmitter(s)/receiver(s) that

comply with Innovation, Science and Economic Development Canada’s

licence-exempt RSS(s). Operation is subject to the following two

conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference that

may cause undesired operation of the device.

Warranty

ONE-YEAR LIMITED WARRANTY

KOHLER plumbing products are warranted to be free of defects in

material and workmanship for one year from date of installation.

Kohler Co. will, at its election, repair, replace or make appropriate

adjustment where Kohler Co. inspection discloses any such defects

occurring in normal usage within one (1) year after installation. Kohler

Co. is not responsible for removal or installation costs. Use of in-tank

toilet cleaners will void the warranty.

To obtain warranty service contact Kohler Co. either through your

Dealer, Plumbing Contractor, Home Center or E-tailer, or by writing

Kohler Co., Attn.: Customer Care Center, 444 Highland Drive, Kohler,

WI 53044, USA, or by calling 1-800-4-KOHLER (1-800-456-4537) from

within the USA and Canada, and 001-800-456-4537 from within Mexico,

or visit www.kohler.com within the USA, www.ca.kohler.com from

within Canada, or www.mx.kohler.com in Mexico.

IMPLIED WARRANTIES INCLUDING THAT OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE EXPRESSLY LIMITED IN DURATION TO THE

DURATION OF THIS WARRANTY. KOHLER CO. AND/OR

SELLER DISCLAIM ANY LIABILITY FOR SPECIAL, INCIDENTAL

OR CONSEQUENTIAL DAMAGES. Some states/provinces do not

allow limitations on how long an implied warranty lasts, or the

exclusion or limitation of special, incidental or consequential damages,

1347697-2-A 10 Kohler Co.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler K-16250 Montageanleitung

Kohler

Kohler Glenbury Quiet-Close K-4733 Bedienungsanleitung

Kohler

Kohler OnCue Plus RDC Bedienungsanleitung

Kohler

Kohler K-7142 Montageanleitung

Kohler

Kohler K-45764X Montageanleitung

Kohler

Kohler K-7167 Montageanleitung

Kohler

Kohler Discovery Bedienungsanleitung

Kohler

Kohler STRAYT 37341-4 Bedienungsanleitung

Kohler

Kohler K-7465 Montageanleitung

Kohler

Kohler K-7305 Betriebsanleitung

Kohler

Kohler Antique K-100 Montageanleitung

Kohler

Kohler Rada T4 Series Bedienungsanleitung

Kohler

Kohler ESCALE Bedienungsanleitung

Kohler

Kohler K-146 Montageanleitung

Kohler

Kohler Mira Sport J03A Bedienungsanleitung

Kohler

Kohler Parallel T23492-4-CP Bedienungsanleitung

Kohler

Kohler K-T15231 Bedienungsanleitung

Kohler

Kohler Revival K-2950-1/8 Bedienungsanleitung

Kohler

Kohler 10089W-CP Bedienungsanleitung

Kohler

Kohler 72842T-4ND Bedienungsanleitung

Kohler

Kohler K-4000 Montageanleitung

Kohler

Kohler 22572T-9 Bedienungsanleitung

Kohler

Kohler ODEON K-8766 Bedienungsanleitung

Kohler

Kohler Oblo K-124B16-SANA-CP Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung