Kohler K-10430 Bedienungsanleitung

Installation Guide

Kitchen Sink Faucets

Mproduct numbers are for Mexico (i.e. K-12345M)

Los números de productos seguidos de

Mcorresponden a México (Ej.

K-12345M)

Français, page “Français-1”

Español, página “Español-1”

K-10430, K-R10434 K-R10430

1036178-2-F

Thank You For Choosing Kohler Company

We appreciate your commitment to Kohler quality. Please take a few

minutes to review this manual before you start installation. If you

encounter any installation or performance problems, please don’t

hesitate to contact us. Our phone numbers and website are listed on

the back cover. Thanks again for choosing Kohler Company.

Tools and Materials

Before You Begin

Observe all local plumbing and building codes.

Shut off the water supplies.

Before installation, unpack the new faucet and inspect it for

damage. Return the faucet to the carton until you are ready to

install it.

Carefully inspect waste and supply tubing for any sign of

damage and replace if necessary.

For new installations, assemble the faucet to the sink before

installing the sink.

Kohler Co. reserves the right to make revisions in the design of

faucets without notice, as speciﬁed in the Price Book.

Two 3/8" Male

Supply

Connections

Adjustable

Wrench

Plumbers

Putty

Phillips

Screwdriver Hex Wrench

1036178-2-F 2 Kohler Co.

1. Install the Handspray

Apply a bead of plumbers putty or other sealant to the underside

of the spray holder according to the manufacturer’s instructions.

Insert the spray holder into the sink hole.

From under the sink, securely hand tighten the nut.

Remove any excess putty or sealant.

Insert the handspray hose through the spray holder.

Hose

Sink

Nut

Handspray

Spray

Holder

Apply

plumbers

putty.

Kohler Co. 3 1036178-2-F

2. Install the Faucet

IMPORTANT! When mounting the faucet to uneven surfaces, such

as tile grout lines, apply a suitable sealant in addition to the gasket

provided. The sealant will reduce the risk of water seepage under

the faucet.

Slide the escutcheon and gasket to the spout.

Partially thread two screws into the threaded ring until they

protrude slightly from the backside of the threaded ring.

Apply thread sealant to the spray hose outlet threads.

Slide the threaded ring and metal washer onto the handspray

hose.

Run the handspray hose up through the spout mounting hole,

then connect and tighten the handspray hose to the spray hose

outlet.

Position the spout in the desired mounting position.

Slide the metal washer onto the shank from the underside of the

sink.

Thread the ring up the shank until it is about 1/4″(6 mm) away

from the underside of the sink. Ensure the screw holes face the

front and back of the faucet.

Tighten the screws.

Spout

Handspray

Sink

Escutcheon

Washer

Ring Screws

Gasket

Spray Hose

Outlet

1036178-2-F 4 Kohler Co.

3. Install the Remote Valve

NOTE: The remote valve must be located within 8″(20.3 cm) of the

spout.

Slide the hub over the supply hoses and onto the remote valve.

Slide the gasket over the supply hoses onto the hub.

Position the remote valve in the desired location.

Assemble the bracket, washer, and nut to the stud from

underneath the sink.

Align the handle and securely tighten the nut.

Connect the inlet hose to the spout connection. Make sure the

O-ring (not shown) in the spout connection is in place.

Sink

Stud

Bracket

Washer

Nut

Gasket

Inlet Hose

Remote

Valve

Hub

Spout

Connection

Kohler Co. 5 1036178-2-F

4. Install the Soap Dispenser - Style A

NOTE: If your soap dispenser components do not match the above

illustration, proceed to the next ″Install the Soap Dispenser - Style B″

section.

Remove the nut from the escutcheon.

Apply plumbers putty or other sealant in the groove on the

underside of the escutcheon according to the manufacturer’s

instructions.

Position the escutcheon in the desired mounting hole.

From underneath the sink thread the nut onto the escutcheon.

Tighten the nut until the escutcheon is ﬁrmly held in place.

Thread the dispenser bottle onto the escutcheon from below.

Fill the dispenser bottle with soap from above the sink.

Insert the pump assembly into the escutcheon.

Escutcheon

Bottle

Nut

Cap

Apply Plumbers

Putty Here.

Pump

Assembly

1036178-2-F 6 Kohler Co.

5. Install the Soap Dispenser - Style B

Slide the gasket onto the pump assembly.

Insert the blunt end of the tube into the bottom of the pump

assembly.

Position the assembly in the desired mounting hole.

From underneath the sink, thread the nut onto the pump

assembly. Securely hand tighten the nut.

Fill the bottle with soap/lotion.

Slide the bottle opening over the tube and thread the bottle into

the pump assembly until secure.

Pump Assembly

Gasket

Nut

Tube

Bottle

Kohler Co. 7 1036178-2-F

6. Install the Supplies

CAUTION: Risk of restricted waterﬂow and product damage.

Use extreme care when bending the supply hoses to avoid

kinking and twisting. Hoses must not be taut after installation.

NOTE: If the sink installation requires that you coil the supply hoses

to obtain a good connection, maintain an inside coil diameter of at

least 3″(7.6 cm).

Carefully position the hot and cold supplies so they will not

interfere with the other hoses.

Connect the supply hoses to the supply stops. Left is hot, right is

cold.

Tighten all connections.

7. Installation Checkout

Remove the aerator from the end of the spout by turning it

counterclockwise.

Turn on the main water supply.

Open the faucet handle to the ON position.

Flush hot then cold water through the faucet for about one

minute.

Push the faucet handle down to the OFF position.

Reattach the aerator by turning it clockwise.

3" (7.6 cm)

or Larger

Cold

Hot

Aerator

1036178-2-F 8 Kohler Co.

8. Optional Water Temperature Limiting Adjustment

Remove the plug button, setscrew, handle, and bonnet.

Reposition the indexer to stop the valve stem at the desired

maximum temperature.

Turn the handle to the full hot position and check the water

temperature.

Repeat the above procedures until the desired temperature is

reached.

Reinstall the plug button.

Bonnet

Handle

Indexer

Splines

Valve Stem

Setscrew

Plug

Button

Kohler Co. 9 1036178-2-F

Guide d’installation

Robinets d’évier de cuisine

Outils et matériels

Merci d’avoir choisi la compagnie Kohler

Nous apprécions votre engagement envers la qualité Kohler. Veuillez

prendre s’il vous plaît quelques minutes pour lire ce manuel avant de

commencer l’installation. Ne pas hésiter à nous contacter en cas de

problème d’installation ou de performance. Nos numéros de téléphone

et notre adresse du site internet sont au verso. Merci encore d’avoir

choisi la compagnie Kohler.

Avant de commencer

Respecter tous les codes de plomberie et de bâtiment locaux.

Couper les alimentations d’eau.

Avant l’installation, déballer le nouveau robinet et l’examiner

pour en déceler tout dommage. Remettre le robinet dans son

emballage de protection jusqu’à être prêt à l’installation.

Vériﬁer avec soin si l’évacuation ou les tubes d’alimentation pour

déceler tout signe d’endommagement et remplacer si nécessaire.

Pour de nouvelles installations, installer le robinet sur l’évier

avant d’installer ce dernier.

Deux raccords mâles

d'alimentation de 3/8"

Clé à

molette

Clé

hexagonale

Mastic de

plomberie

Tournevis

cruciforme

Kohler Co. Français-1 1036178-2-F

Andere Handbücher für K-10430

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler K-302 Bedienungsanleitung

Kohler

Kohler Oblo K-124B16-SANA-CP Bedienungsanleitung

Kohler

Kohler MODULO 78023T-4 Bedienungsanleitung

Kohler

Kohler Centerset K-15885 Montageanleitung

Kohler

Kohler HYDRO-TOWER 200 Series Bedienungsanleitung

Kohler

Kohler RADA FE9 2.1942.005 Bedienungsanleitung

Kohler

Kohler sprig Bedienungsanleitung

Kohler

Kohler K-13132 Montageanleitung

Kohler

Kohler K-6448 Montageanleitung

Kohler

Kohler C3-430 Montageanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Kohler

Kohler K-T125 Bedienungsanleitung

Kohler

Kohler PARALLEL K-31139T-4-BL Bedienungsanleitung

Kohler

Kohler K-17492 Montageanleitung

Kohler

Kohler July 16027 Bedienungsanleitung

Kohler

Kohler TAHOE Bedienungsanleitung

Kohler

Kohler ARTIFACTS 72798T Bedienungsanleitung

Kohler

Kohler 8881T-VC01-BN Bedienungsanleitung

Kohler

Kohler K-2277 Bedienungsanleitung

Kohler

Kohler MINIMA K-45803T-L-SHP Bedienungsanleitung

Kohler

Kohler K-8998 Montageanleitung

Kohler

Kohler K-1110-G Kurzanleitung

Kohler

Kohler K-T10277 Montageanleitung

Kohler

Kohler 18464 Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung