Kohler K-10441 Bedienungsanleitung

Installation Guide

Single-Control Entertainment Sink Faucet

Mproduct numbers are for Mexico (i.e. K-12345M)

Los números de productos seguidos de

Mcorresponden a México (Ej.

K-12345M)

Français, page “Français-1”

Español, página “Español-1”

K-10441 K-10443

1059390-2-A

Tools and Materials

Thank You For Choosing Kohler Company

We appreciate your commitment to Kohler quality. Please take a few

minutes to review this manual before you start installation. If you

encounter any installation or performance problems, please don’t

hesitate to contact us. Our phone numbers and website are listed on

the back cover. Thanks again for choosing Kohler Company.

Before You Begin

Observe all local plumbing and building codes.

Shut off the water supplies.

Before installation, unpack the new faucet and inspect it for

damage. Return the faucet to the carton until you are ready to

install it.

Carefully inspect waste and supply tubing for any sign of

damage and replace if necessary.

For new installations, assemble the faucet to the sink before

installing the sink.

Kohler Co. reserves the right to make revisions in the design of

faucets without notice, as speciﬁed in the Price Book.

Two 3/8" Male

Supply

Connections

Adjustable

Wrench

Plumbers

Putty

Phillips

Screwdriver Hex Wrench

Thread

Sealant

1059390-2-A 2 Kohler Co.

1. Install the Handspray

Apply a bead of plumbers putty or other sealant to the underside

of the spray holder according to the manufacturer’s instructions.

Insert the spray holder into the sink hole.

From under the sink, securely hand tighten the nut.

Remove any excess putty or sealant.

Insert the handspray hose through the spray holder.

Nut

Handspray

Hose

Handspray

Apply

plumbers

putty.

Spray

Holder

Sink

Kohler Co. 3 1059390-2-A

2. Install the Faucet

IMPORTANT! When mounting the faucet to uneven surfaces, such

as tile grout lines, apply a suitable sealant in addition to the gasket

provided. The sealant will reduce the risk of water seepage under

the faucet.

Slide the escutcheon and gasket to the spout.

Partially thread two screws into the threaded ring until they

protrude slightly from the backside of the threaded ring.

Apply thread sealant to the spray hose outlet threads.

Slide the threaded ring and metal washer onto the handspray

hose.

Run the handspray hose up through the spout mounting hole,

then connect and tighten the handspray hose to the spray hose

outlet.

Position the spout in the desired mounting position.

Slide the metal washer onto the shank.

Thread the ring up the shank until it is about 1/4″(6 mm) away

from the underside of the sink. Ensure the screw holes face the

front and back of the faucet.

Tighten the screws.

Escutcheon

Spout Hose

Spout

Spray Hose Outlet

Threaded Ring

Screws

Gasket

Shank

Handspray Hose

Metal Washer

1059390-2-A 4 Kohler Co.

3. Install the Remote Valve

NOTE: The remote valve must be located within 8″(20.3 cm) of the

spout.

Slide the O-ring over the supply hoses onto the base of the

remote valve.

Insert the remote valve through the hole in the mounting surface.

Assemble the bracket, washer, and nut to the stud from

underneath the mounting surface.

Align the handle and securely tighten the nut.

Connect the inlet spout tube to the spout hose (not shown). Make

sure the O-ring (not shown) on the inlet spout tube is in place.

Inlet Spout Tube

Stud

Supply Hoses

Bracket

Sink

O-Ring

Washer Nut

Remote Valve

Kohler Co. 5 1059390-2-A

4. Install the Supplies

CAUTION: Risk of restricted waterﬂow and product damage.

Use extreme care when bending the supply hoses to avoid

kinking and twisting. Hoses must not be taut after installation.

NOTE: If the sink installation requires that you coil the supply hoses

to obtain a good connection, maintain an inside coil diameter of at

least 3″(7.6 cm).

Carefully position the hot and cold water supplies so they will

not interfere with other hoses.

Connect the supply hoses to the supply stops. Left is hot, right is

cold.

Tighten all connections.

3" (7.6 cm)

or Larger

Cold

Hot

1059390-2-A 6 Kohler Co.

5. Installation Checkout

Verify the faucet handle is in the OFF position and all connections

are tight.

Remove the aerator from the end of the spout by turning the

aerator counterclockwise.

Turn on the main water supply.

Check all connections for leaks; repair as needed.

Lift the handle to the ON position to run water through the

faucet.

Check all connections for leaks. Make any adjustments as needed.

Allow water to run through the spout to remove any debris.

Lower the handle to the OFF position.

Reinstall the aerator by turning it clockwise.

Aerator

Faucet

Spout

Kohler Co. 7 1059390-2-A

6. Optional Temperature Limiting Adjustment

NOTE: The handle style shown may differ from the handle

supplied. The adjustment procedures still apply.

NOTE: The water temperature does not need to be adjusted if the

water temperature is below 105°F (41°C).

NOTE: Before adjusting the water temperature, ensure the handle is

turned all the way to the left. This is the maximum hot position.

Remove the plug button, setscrew, handle, and bonnet.

Reposition the indexer to stop the valve stem at the desired

maximum temperature.

Allow the water to ﬂow through the spout and rotate the valve

stem to the full hot position to conﬁrm the temperature setting.

Repeat the above procedures until the desired temperature is

reached.

Reinstall the bonnet and handle onto the faucet body. Secure the

handle with the setscrew.

Reinstall the plug button.

Bonnet

Handle

Indexer

Splines

Valve Stem

Setscrew

Plug

Button

1059390-2-A 8 Kohler Co.

Guide d’installation

Robinets d’évier de récréation mono-contrôle

Outils et matériels

Merci d’avoir choisi la compagnie Kohler

Nous apprécions votre engagement envers la qualité Kohler. Veuillez

prendre s’il vous plaît quelques minutes pour lire ce manuel avant de

commencer l’installation. Ne pas hésiter à nous contacter en cas de

problème d’installation ou de performance. Nos numéros de téléphone

et notre adresse du site internet sont au verso. Merci encore d’avoir

choisi la compagnie Kohler.

Avant de commencer

Respecter tous les codes de plomberie et de bâtiment locaux.

Couper les alimentations d’eau.

Avant l’installation, déballer le nouveau robinet et l’examiner

pour en déceler tout dommage. Remettre le robinet dans son

emballage de protection jusqu’à être prêt à l’installation.

Vériﬁer avec soin si l’évacuation ou les tubes d’alimentation pour

déceler tout signe d’endommagement et remplacer si nécessaire.

Pour de nouvelles installations, installer le robinet sur l’évier

avant d’installer ce dernier.

Deux raccords

mâles d'alimentation

de 3/8"

Clé à

molette Clé hexagonale

Mastic de

plomberie

Tournevis

cruciforme

Ruban d'étanchéité

pour filetage

Kohler Co. Français-1 1059390-2-A

Avant de commencer (cont.)

Kohler Co. se réserve le droit d’apporter toutes modiﬁcations au

design des robinets et ceci sans préavis, comme spéciﬁé dans le

catalogue des prix.

1059390-2-A Français-2 Kohler Co.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler K-73194X-4A Montageanleitung

Kohler

Kohler K-7128 Montageanleitung

Kohler

Kohler K-856 Kurzanleitung

Kohler

Kohler COMPOSED K-25421T Bedienungsanleitung

Kohler

Kohler K-4350 Series Montageanleitung

Kohler

Kohler Portrait K-2226 Bedienungsanleitung

Kohler

Kohler K-18486 Montageanleitung

Kohler

Kohler K-116 Bedienungsanleitung

Kohler

Kohler Symbol 18471-4FP Bedienungsanleitung

Kohler

Kohler K-302 Montageanleitung

Kohler

Kohler Cleansing Seat Montageanleitung

Kohler

Kohler Coralais Rite-Temp 114522-2-CE Bedienungsanleitung

Kohler

Kohler MEMOIRS Series Bedienungsanleitung

Kohler

Kohler K-705771 Montageanleitung

Kohler

Kohler K-9677 Montageanleitung

Kohler

Kohler Revival K-2950-1/8 Bedienungsanleitung

Kohler

Kohler K-6448 Montageanleitung

Kohler

Kohler K-11076 Montageanleitung

Kohler

Kohler K-5026 Montageanleitung

Kohler

Kohler Carillon K-7806-95 Bedienungsanleitung

Kohler

Kohler K23857-CP Bedienungsanleitung

Kohler

Kohler K-7131 Montageanleitung

Kohler

Kohler PURIST 10129T-4 Bedienungsanleitung

Kohler

Kohler 72218T-B7-CP Montageanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung