Kohler K-4000 Montageanleitung

Installation and Care Guide

Touchless Flush

K-4000, K-6418, K-6419,

K-18202, K-99249, K-99250

Français, page “Français-1”

Español, página “Español-1”

1224637-2-D

Provided Components

Before You Begin

CAUTION: Risk of property damage: Do not use lithium

ion batteries with this product. Exposing lithium ion batteries

to water can result in a ﬁre.

NOTICE: Risk of property damage. If the toilet is plugged, turn off

the water supply before attempting to unplug it. The sensor can be

inadvertently activated while unplugging the toilet, resulting in an

overﬂow.

NOTICE: Risk of product damage. Use of in-tank toilet cleaners

will damage this product. In-tank cleaners emit gases which will

damage the seals and corrode the interior components. Damage due

to use of in-tank cleaners voids the warranty.

For product videos and more information visit

KOHLER.com/TouchlessToilet.

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

Pads

Provided Components

Bracket

Module

Vent Bridge

(4) AA Batteries

1224637-2-D 2 Kohler Co.

1. Determine the Bracket Location

NOTE: The model number of your toilet can be found on the

packaging or stamped on the inside of the tank on the back wall.

Check the table below to determine the bottom tab location.

Install the bracket on the module, with the bottom tab in the slot

indicated in the table below.

Model Bottom Tab Bracket Location

K-4000 Slot #5

K-6418, K-6419 Slot #5

K-18202 Slot #5

K-99249, K-99250 Slot #5

Slot

Bottom Tab

Module

Bracket

Kohler Co. 3 1224637-2-D

2. Install and Connect the Module

NOTE: If the toilet tank does not have vent holes, discard the

bridge.

NOTE: The orientation of the bracket location marks to the vent or

other tank features will vary on different models of toilets.

If a vent is present, install the bridge over the vent if the vent is

aligned with the bracket marks.

Install the module with the bracket aligned with the bracket

marks.

Connect the chain from the canister to the wheel.

Bracket Marks

Bridge

1224637-2-D 4 Kohler Co.

3. Install the Batteries

CAUTION: Risk of property damage: Do not use lithium

ion batteries with this product. Exposing lithium ion batteries

to water can result in a ﬁre.

NOTE: When the batteries are low, the unit will beep ﬁve times at

half second intervals when activated. Replace the batteries when this

happens.

Install the batteries in the battery holder. Orient them as shown in

the diagram on the battery holder.

Open the module lid.

Install the battery holder with the open side facing the back of

the module and press down until it stops.

Conﬁrm the top edge of the battery holder is below the rim of the

module.

Close the module lid and press on the front ledge until the clasp

engages.

Position

as shown.

Battery Holder

Rim

Press.

Kohler Co. 5 1224637-2-D

4. Check Operation

Turn the water supply back on. Allow the tank to ﬁll.

Check for leaks.

Flush the toilet repeatedly using the module.

Observe the canister.

Does the canister fully close when the ﬂush is complete? If not,

adjust the bracket location.

Observe the movement of the wheel.

Does the wheel come in contact with anything when rotating?

Adjust the bracket location as needed.

1224637-2-D 6 Kohler Co.

5. Complete the Installation

IMPORTANT! Wait at least 10 seconds after the last test ﬂush

before installing the tank lid. Hold your hand over the sensor for 1-2

seconds after installing the lid to conﬁrm proper operation.

NOTE: If you are unable to activate the sensor immediately after

installing the tank lid, wait a minimum of 5 minutes for the sensor

to calibrate.

For tank lid stability, install four pads, two on the front (not

shown) and two on the back, near each corner of the tank lid or

tank rim where the lid contacts the tank rim. The pads stabilize

the lid, helping stop false ﬂushes when the lid is bumped.

Install the tank lid.

Hold your hand approximately 1″(25 mm) above the module.

The toilet will ﬂush.

Consult the troubleshooting chart for operation or performance

issues.

Emblem

Sensor Indicator

Pad

Kohler Co. 7 1224637-2-D

Troubleshooting

NOTICE: Risk of property damage. If the toilet is plugged, turn off

the water supply before attempting to unplug it. The sensor can be

inadvertently activated while unplugging the toilet, resulting in an

overﬂow.

NOTE: For service parts information, visit your product page at

www.kohler.com/serviceparts.

Symptoms Recommended Action

1. Toilet is blocked. A. Turn off the water supply. Clear

the blockage using a plunger.

Consult the toilet troubleshooting

for further information.

2. Nothing happens when I

try to activate the sensor. A. Conﬁrm the batteries are correctly

installed.

B. Conﬁrm the batteries have a

charge.

3. The module works, I hear

a beep, the wheel rotates,

the chain moves, but the

toilet does not ﬂush.

A. Conﬁrm the chain is attached to

the wheel and canister.

B. Remove any twists in the chain.

4. The wheel contacts the

canister when ﬂushing. A. Relocate the module further from

the canister to allow room for

operation.

5. The toilet ﬂushes, but the

ﬂush is weak. A. Consult the toilet troubleshooting.

6. The sensor is not sensitive

enough (does not activate

when hand is within 1″(25

mm)-2″(51 mm).

A. Move the module up one notch on

the bracket if the gap is more than

1/4″(6 mm).

B. Conﬁrm the sensor emblem is

located directly above the icon on

the module. Relocate the emblem

if it is not located correctly.

7. The toilet ﬂushes when I

am sitting on it. A. Are you leaning back and

bumping the tank lid? Moving the

tank lid may cause the toilet to

ﬂush.

B. Are pads installed on the tank rim

or lid? Install the provided foam

pads on the tank rim or lid to

stabilize the tank lid.

1224637-2-D 8 Kohler Co.

Troubleshooting (cont.)

Symptoms Recommended Action

8. The toilet ﬂushes when

opening the seat cover. A. Does the seat or lid strike the tank

lid when they are opened? Moving

the tank lid may cause the toilet to

ﬂush.

B. Are pads installed on the tank rim

or lid? Install the provided foam

pads on the tank rim or lid to

stabilize the tank lid.

Warranty

ONE-YEAR LIMITED WARRANTY

KOHLER plumbing products are warranted to be free of defects in

material and workmanship for one year from date of installation.

Kohler Co. will, at its election, repair, replace or make appropriate

adjustment where Kohler Co. inspection discloses any such defects

occurring in normal usage within one (1) year after installation. Kohler

Co. is not responsible for removal or installation costs. Use of in-tank

toilet cleaners will void the warranty.

To obtain warranty service contact Kohler Co. either through your

Dealer, Plumbing Contractor, Home Center or E-tailer, or by writing

Kohler Co., Attn.: Customer Care Center, 444 Highland Drive, Kohler,

WI 53044, USA, or by calling 1-800-4-KOHLER (1-800-456-4537) from

within the USA and Canada, and 001-800-456-4537 from within Mexico,

or visit www.kohler.com within the USA, www.ca.kohler.com from

within Canada, or www.mx.kohler.com in Mexico.

IMPLIED WARRANTIES INCLUDING THAT OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE EXPRESSLY LIMITED IN DURATION TO THE

DURATION OF THIS WARRANTY. KOHLER CO. AND/OR

SELLER DISCLAIM ANY LIABILITY FOR SPECIAL, INCIDENTAL

OR CONSEQUENTIAL DAMAGES. Some states/provinces do not

allow limitations on how long an implied warranty lasts, or the

exclusion or limitation of special, incidental or consequential damages,

so these limitations and exclusions may not apply to you. This

warranty gives you speciﬁc legal rights. You may also have other

rights which vary from state/province to state/province.

This is Kohler Co.’s exclusive written warranty.

Kohler Co. 9 1224637-2-D

Guide d’installation et d’entretien

Chasse sans contact

Composants fournis

Avant de commencer

ATTENTION: Risque de dommages matériels: Ne pas

utiliser de piles aux ions de lithium avec ce produit.

L’exposition de piles aux ions de lithium à l’eau peut

entraîner un incendie.

AVIS: Risque de dommages matériels. Si la toilette est bouchée,

couper l’arrivée d’eau avant d’essayer de la déboucher. Le capteur

peut être activé par accident pendant que l’on débouche la toilette,

ce qui entraîne un débordement.

AVIS: Risque d’endommagement du produit. L’utilisation de

nettoyants de toilette dans le réservoir endommage ce produit. Les

nettoyants dans le réservoir émettent des gaz qui endommagent les

joints et corrodent les composants intérieurs. Les endommagements

dûs aux nettoyants à l’intérieur du réservoir annulent la garantie.

Pour des vidéos sur le produit et pour obtenir de l’information

supplémentaire, visiter le site KOHLER.com/TouchlessToilet.

Cet appareil est conforme à la section 15 des réglementations de la

Coussinets

Composants fournis

Support

Pont d'évent

(4) piles AA

Module

Kohler Co. Français-1 1224637-2-D

Andere Handbücher für K-4000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler Modernlife Touchless 77786K-TF-0 Bedienungsanleitung

Kohler

Kohler K-7179 Montageanleitung

Kohler

Kohler K-2958 Montageanleitung

Kohler

Kohler K-12286 Montageanleitung

Kohler

Kohler Mira Honesty Bedienungsanleitung

Kohler

Kohler C3-150 Bedienungsanleitung

Kohler

Kohler K-7344 Bedienungsanleitung

Kohler

Kohler K-193-4-CP Bedienungsanleitung

Kohler

Kohler COUTURE ECO-LITE Bedienungsanleitung

Kohler

Kohler Sterling 446124 Bedienungsanleitung

Kohler

Kohler URBANITY 23748T-9 Bedienungsanleitung

Kohler

Kohler K-2220X Montageanleitung

Kohler

Kohler K-682 Montageanleitung

Kohler

Kohler K-10094 Montageanleitung

Kohler

Kohler K-T10594 Montageanleitung

Kohler

Kohler K-412 Montageanleitung

Kohler

Kohler 8002A Bedienungsanleitung

Kohler

Kohler K-310 Montageanleitung

Kohler

Kohler K-18647 Montageanleitung

Kohler

Kohler PINOIR K-2015 Bedienungsanleitung

Kohler

Kohler Jarves K-5055 Bedienungsanleitung

Kohler

Kohler K-8220 Bedienungsanleitung

Kohler

Kohler K-T14783 Montageanleitung

Kohler

Kohler K-T16229 Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung