Kohler Co. 5 1358590-X2-A
Take out Deck and place it at the designated place after instal-
lation is nished.
Install the Plumbing
1. Install the drain in accordance with the manufacturer's
instructions.
NOTE:
The distance from center of vanity drain hole to the
wall is 78 mm/81 mm (see roughing-in), and please choose
suitable drainage pipe.
Caution! Make sure a watertight seal exists on all basin
drain connections.
Caution! Provide access to the plumbing connections
for future plumbing maintenance.
2. Connect the hot and cold water supplies.
3. Open the hot and cold water valves, and check the supply
connections for leaks.
4. Run water into the basin, and check the drain connections
for leaks.
Install the drain
Install the flexible pipe into the drain.
Fill up the gap between drain stub-out pipe with sealants.
Fig. 6 /
CARE AND CLEANING
Carefully read the cleaner product label to ensure the
cleaner is safe for use on the material.
Always test your cleaning solution on an inconspicuous
area before applying to the entire surface.
Wipe surfaces clean and rinse completely with water
immediately after cleaner application. Rinse and dry
any overspray that lands on nearby surfaces.
Do not allow cleaners to sit or soak on the surface.
Use a soft, dampened sponge or cloth. Never use an
abrasive material such as a brush or scouring pad to
clean surfaces.
Be careful not to leave staining materials in contact
with the surface for extended periods of time.
The ideal cleaner technique is to rinse thoroughly and
blot dry any water from the surface after each use.
ท่ออ่อน
Flexible Pipe
Pipe
รูท่อน้ำทิ้ง
Sealants.
Fig. 5 /
