Konica Minolta PS5000C MKII Bedienungsanleitung

PS5000C MKII

Operator’s Manual

SAFETY INFORMATION

This section contains detailed instructions on the operation and maintenance of this machine. To

achieve optimum utility of this device, all operators should carefully read and follow the instructions

in this manual. Please keep this manual in a handy place near the machine.

Please read the next section before using this device. It contains important information

related to user safety and preventing equipment problems.

Make sure you observe all of the precautions listed in this manual.

* Please note that some parts of the contents of this section may not correspond with the purchased

product.

Warning and Precautions Symbols

WARNING: Ignoring this warning could cause serious injury or even death.

CAUTION: Ignoring this caution could cause injury or damage to property.

Meaning of Symbols

A triangle indicates a danger against which you should take precautions.

This symbol warns against possible electric shock.

A dialog line indicates a prohibited course of action.

This symbol warns against dismantling the device.

A Black circle indicates an imperative course of action.

This Symbol indicates you must unplug device.

WARNING

●Do not modify product, as a fire, electrical shock, or breakdown could result. If

the product employs a laser, the laser beam source could cause blindness.

●Do not attempt to remove the covers and panels which have been fixed to the

product. Some products have a high-voltage part or a laser beam source inside

that could cause an electrical shock or blindness.

●Only use the power cord supplied in the package. Failure to use this cord could

result in a fire or electrical shock.

●Use only he specified power source voltage. Failure to do that could result in a

fire or electrical shock.

●Do not use a multiple outlet adapter to connect any other appliances or

machines. Use of power outlet for more than the marked current value could

result in a fire or electrical shock.

●Do not unplug and plug in the power cord with a wet hand, as electrical shock

could result.

●Plug the power cord all the way into the power outlet. Failure to do this could

result in a fire or electrical shock.

●Do not scratch, abrade, place a heavy object on, heat, bend, pull on, or damage

the power cord. Use of a damaged power cord (exposed core wire, broken

wire, etc.) could result in a fire or breakdown.

Should any of these conditions be found, immediately turn OFF the power

switch, unplug the power cord from the power outlet, and then call your

authorized service representative.

●In principle, do not use an extension cord. Use of an extension cord could

cause a fire or electrical shock. Contact your authorized service representative

if an extension cord is required.

●Do not place a flower vase or other container that contains water, or metal clips

or other small metallic objects on this product. Spilled water or metallic objects

dropped inside the product could result in fire, electrical shock, or breakdown.

Should a piece of metal, water or any other similar foreign matter get inside the

product, immediately turn OFF the power switch, unplug the power cord from

the power outlet, and then call your authorized service representative.

iii

WARNING

●If this product becomes inordinately hot or emits smoke, or unusual odor or

noise, immediately turn OFF the power switch, unplug the power cord from

the power outlet, and then call your authorized service representative. If you

keep on using it as is, a fire or electrical shock could result.

●If this product has been dropped or its cover damage, immediately turn OFF

the power switch, unplug the power cord from the power outlet, and then call

your authorized service representative. If you keep on using it as is, a fire or

electrical shock could result.

●Do not throw the toner cartridge or toner into an open flame. The hot toner

may scatter and cause burn or other damage.

●Connect the power cord to an electrical outlet that is equipped with a

grounding terminal.

CAUTION

●Do not use flammable sprays, liquids, or gases near this product, as a fire could

result.

●Do not leave a toner unit or drum unit in a place within easy reach of children.

Licking or ingesting any of these things could injure your health.

●Do not let any object plug the ventilation holes of this product. Heat could

accumulate inside the product, resulting in a fire or malfunction.

●Do not install this product at a site that is exposed to direct sunlight, or near an

air conditioner or heating apparatus. The resultant temperature changes inside

the product could cause a malfunction, fire, or electrical shock.

●Do not place the product in a dusty place, or a site exposed to soot or steam,

near a kitchen table, bath, or a humidifier. A fire, electrical shock, or

breakdown could result.

●Do not place this product on an unstable or tilted bench, or in a location subject

to a lot of vibration and shock. It could drop or fall, causing personal injury or

mechanical breakdown.

●After installing this product, mount it on a secure base. If the unit moves or

falls, it may cause personal injury.

●Do not store toner units and PC drum units near a floppy disk or watch that are

susceptible to magnetism. They could cause these products to malfunction.

●The inside of this product has areas subject to high temperature, which may

cause burns. When checking the inside of the unit for malfunctions such as a

paper misfeed, do not touch the locations (around the fusing unit, etc.) which

are indicated by a “Caution! High Temperature!” warning label.

●Do not place any objects around the power plug as the power plug may be

difficult to pull out when an emergency occurs.

●Always use this product in a well ventilated location. Operating the product in

a poorly ventilated room for an extended period of time could injure your

health. Ventilate the room at regular intervals.

●Whenever moving this product, be sure to disconnect the power cord and other

cables. Failure to do this could damage the cord or cable, resulting in a fire,

electrical shock, or breakdown.

●When moving this product, always hold it by the locations specified in the

operator’s manual or other documents. If the unit falls it may cause severe

personal injury. The product may also be damaged or malfunction.

●Remove the power plug from the outlet more than one time a year and clean

the area between the plug terminals. Dust that accumulates between the plug

terminals may cause a fire.

●When unplugging the power cord, be sure to hold onto the plug. Pulling on the

power cord could damage the cord, resulting in a fire or electrical shock.

Precautions for Routine Use

●Do not store toner units, PC drum units, and other supplies and consumables in

a place subject to direct sunlight and high temperature and humidity, as poor

image quality and malfunction could result.

●Do not attempt to replace the toner unit and PC drum unit in a place exposed to

direct sunlight. If the PC drum is exposed to intense light, poor image quality

could result.

●Do not unpack a toner unit or PC drum unit until the very time of use. Do not

leave an unpacked unit standing. Install it immediately or poor image quality

could result.

●Do not keep toner units and PC drum units in an upright position or upside

down, as poor image quality could result.

●Do not throw or drop a toner unit or PC drum unit as poor image quality could

result.

●Do not use this product in an area where ammonia or other gases or chemicals

are present. Failure to do so may shorten the service life of the product, cause

damage or decrease performance.

●Do not use this product in an environment with a temperature outside the range

specified in the operator’s manual, as a breakdown or malfunction could result.

●Do not attempt to feed stapled paper, carbon paper or aluminum foil thorough

this product, as a malfunction or fire could result.

●Do not touch or scratch the surface of the toner unit developing roller and the

PC drum, as poor image quality could result.

●Use the supplies and consumable recommended by dealer. Use of any supply

or consumable not recommended could result in poor image quality and

breakdown.

Please follow the instructions given in this manual when handling the system and do not touch any

part of the system the manual does not cover.

NEVER attempt to disassemble or remodel the system.

The contents of this manual are subject to change without notice.

No part of this manual may be quoted, reproduced, or translated into any other language.

vii

Introduction

Thank you for choosing our Book Scanner (herein after referred to as “the Scanner”).

This operator’s manual includes precautions for installation/operation of the Scanner, a system outline,

an explanation of the Driver software, operation procedures for the Scanner, troubleshooting tips,

maintenance, and product specifications.

To ensure the best performance and effective use of your unit, read this manual carefully until you

familiarize yourself thoroughly with the unit's operation and features.

Please keep this manual and use it as a quick and handy reference tool for immediately clarifying any

questions that may arise.

Please also note the following precautions.

Safety Information

All area

Use the USB cable supplied with the equipment. Use of an unshielded cable invites radio frequency

interference.

Always refer to this manual when operating the scanner and do not attempt to touch the scanner parts

for which no explanations are given in the text.

NEVER attempt to disassemble or remodel the scanner, as it is very dangerous.

Call your authorized dealer when you want to move a scanner, which has been installed.

U.S.A. only

NOTE

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at their own expense.

WARNIN G

The design and production of this unit conform to FCC regulations, and any changes or modifications

must be registered with the FCC and are subject to FCC control. Any changes made by the purchaser

or user without first contacting the manufacturer will be subject to penalty under FCC regulations.

viii

Scanning into a computer and subsequent printing of the following is also prohibited by law under

some circumstances.

1. Paper Money of the United States or any Foreign Government

2. Obligations or Securities of the United States

3. Postage stamps, Postal Money Orders or Internal Revenue Stamps

4. Passports

5. Badges, Identification Card, Passes or Insignia carried by Federal Departments

6. Obligations or Securities of any Foreign Government, Bank or Corporation

The above list is not all-inclusive, and no liability is assumed for its completeness. In case you have

doubt, consult your lawyer.

UL/UL Marking

This equipment has been tested and found to comply with UL60950-1.

Books, magazines, journals and other materials may be copyrighted.

Unauthorized scanning into a computer and subsequent printing of such

copyrighted materials may be contrary to the provisions of the United States

You are encouraged to obtain permission to scan, copy or otherwise use copyrighted

materials, or to obtain a license from an organization such as the Copyright

Clearance Center in those circumstances where it is appropriate.

KMBS provides this equipment and software for legitimate and lawful purposes only,

and specifically instructs you that use of the software for unlawful purposes violates

the license agreement for the software.

ost a cop

the above notice where it will be clearly visible to

users of the scanner.

Andere Handbücher für PS5000C MKII

Inhaltsverzeichnis

Andere Konica Minolta Scanner Handbücher

Konica Minolta

Konica Minolta bizhub PRESS 1052 Bedienungsanleitung

Konica Minolta

Konica Minolta MS 7000 Bedienungsanleitung

Konica Minolta

Konica Minolta Fujitsu fi-6800 Bedienungsanleitung

Konica Minolta

Konica Minolta DiMAGE Scan Elite 5400 II Handbuch

Konica Minolta

Konica Minolta PS5000C MKII Bedienungsanleitung

Konica Minolta

Konica Minolta MS6000 MK II Bedienungsanleitung

Konica Minolta

Konica Minolta DiMAGE Scan Dual IV Bedienungsanleitung

Konica Minolta

Konica Minolta II Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB PRO 1050 Bedienungsanleitung

Konica Minolta

Konica Minolta Dimage Scan Elite 5400II Bedienungsanleitung

Konica Minolta

Konica Minolta PS5000C MKII Bedienungsanleitung

Konica Minolta

Konica Minolta ScanDIVA Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 600 Bedienungsanleitung

Konica Minolta

Konica Minolta SU-502 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub PRESS C8000 Bedienungsanleitung

Konica Minolta

Konica Minolta PW1-NS Bedienungsanleitung

Konica Minolta

Konica Minolta DR1600 Bedienungsanleitung

Konica Minolta

Konica Minolta Bizhub 222 Bedienungsanleitung

Konica Minolta

Konica Minolta PS7000C MKII Bedienungsanleitung

Konica Minolta

Konica Minolta SL1000 Digital Film Scanner Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB C252 Bedienungsanleitung

Konica Minolta

Konica Minolta Color Centro IC-601 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 160 Bedienungsanleitung

Konica Minolta

Konica Minolta SL1000 Digital Film Scanner Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung