Kramer VS-5x5 Bedienungsanleitung

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

VS-5x5

5x5 Video Audio Matrix

Switcher

P/N: 2900-055001 Rev 6

VS-5x5 – Contents i

Contents

1Introduction 1

2Getting Started 2

2.1Achieving the Best Performance 2

2.2Firmware Upgrade 2

3Overview 3

3.1Defining the VS-5x5 5x5 Video Audio Matrix Switcher 3

4Installing in a Rack 6

5Connecting the VS-5x5 5x5 Video Audio Matrix Switcher 7

5.1Connecting the VS-5x5 Rear Panel 7

5.2Connecting to the VS-5x5 via RS-232 8

5.3Connecting a PC or Controller to the RS-485 Port 9

5.4Connecting a Balanced/Unbalanced Stereo Audio Input/Output 10

5.5Setting the DIP-Switches 10

6Controlling via RS-232 and RS-485 12

7Operating the VS-5x5 14

7.1Displaying Unit Characteristics 14

7.2Choosing the Audio-Follow-Video or Breakaway Option 15

7.3Switching OUT-IN Combinations 15

7.4Confirming Settings 16

7.5Storing/Recalling Input/Output Configurations 17

7.6Locking the Front Panel 19

7.7Adjusting the Audio Gain Control 19

8Technical Specifications 20

9Table of Hex Codes for Serial Communication 21

10Tables of Hex Codes for Audio Input/Output Gain Control 22

10.1Tables of Hex Codes for Audio Input GainControl 22

10.2Tables of Hex Codes for Audio Output Gain Control 24

11Kramer Protocol 2000 26

Figures

Figure 1: VS-5x5 Video Audio Matrix Switcher - Front Panel 4

Figure 2: VS-5x5 Video Audio Matrix Switcher - Rear Panel 5

Figure 3: Connecting the VS-5x5 5x5 Video Audio Matrix Switcher 8

Figure 4: Crossed Cable RS-232 Connection 9

Figure 5: Straight Cable RS-232 Connection with a Null Modem Adapter 9

Figure 6: Balanced Stereo Audio Connection 10

Figure 7: Unbalanced Stereo Audio Input Connection 10

Figure 8: Unbalanced Stereo Audio Output Connection 10

Figure 9: DIP-switch Settings 10

Figure 10: Cascade Configuration for RS-232/RS-485 Control 13

Figure 11: VS-5x5 Unit Characteristics 14

Figure 12: Storing and Recalling using the Input / Output Buttons 17

VS-5x5 - Introduction 1

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront the video, audio, presentation, and broadcasting

professional on a daily basis. In recent years, we have redesigned and upgraded

most of our line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix

Switchers; GROUP 3: Control Systems; GROUP 4: Format/Standards Converters;

GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;

GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors;

GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters; and

GROUP 11: Sierra Products.

Congratulations on purchasing your Kramer VS-5x5 5x5 Video Audio Matrix

Switcher, which is ideal for the following typical applications:

•Professional display systems requiring true 5x5 matrix operation

•Multimedia and presentation source and acceptor selection, and remote

monitoring of computer activity in schools and businesses

2VS-5x5 - Getting Started

2 Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

•Review the contents of this user manual

•Use Kramer high performance high resolution cables

•Use only the power cord that is supplied with this machine

Go to http://www.kramerelectronics.com to check for up-to-date

user manuals, application programs, and to check if firmware

upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

•Use only good quality connection cables to avoid interference, deterioration

in signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

•Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

•Position your Kramer VS-5x5 away from moisture, excessive sunlight and

dust

2.2 Firmware Upgrade

For instructions on upgrading the firmware, see the document: Upgrading the

VS-5x5 Firmware.

The latest version of firmware and installation instructions can be downloaded

from the Kramer Web site at www.kramerelectronics.com.

VS-5x5 - Overview 3

3 Overview

The VS-5x5 is a true 5x5 matrix switcher for composite video signals and

balanced stereo audio signals. The VS-5x5 lets you simultaneously route any or

all of the 5 inputs to any or all of the 5 outputs.

The VS-5x5 5x5 Video Audio Matrix Switcher includes:

•Video bandwidth of 70MHz that ensures transparent performance

•Easy-to-connect detachable terminal block connectors for the audio signals

•Glitch-free transitions, which are produced when sources share a common

reference sync, as switching occurs during the vertical interval. Any input or

special external sync input may be selected as the vertical interval source

•DC coupled inputs and outputs

•Audio-follow-video and breakaway options

•The storing and recalling of setups

•A “Take” button for precise switch control

•A “Lock” button to prevent tampering with the front panel

•Gain control for all inputs and all outputs

Control the VS-5x5 via:

•The front panel buttons, infrared remote control transmitter, and remotely by

RS-485 or RS-232 serial commands transmitted by a touch screen system,

PC, RC-IR3 or other serial controller

The VS-5x5 is housed in a 19” 1U rack mountable enclosure, with rack “ears”

included and is fed from a 100-240V AC universal switching power supply.

3.1 Defining the VS-5x5 5x5 Video Audio Matrix Switcher

This section defines the VS-5x5 5x5 Video Audio Matrix Switcher:

Figure 1: VS-5x5 Video Audio Matrix Switcher - Front Panel

# Feature Function

1 IR Receiver The yellow LED is illuminated when receiving signals from the infrared remote control transmitter

2 POWER Switch Illuminated switch for turning the unit ON or OFF

3 OUT Buttons Select the output to which the input is switched

4 IN Buttons Select the input to switch to the output

5 ALL Button Pressing ALL followed by an INPUT button, connects that input to all outputs

For example, press ALL and then Input button # 2 to connect input # 2 to all the outputs

6 OFF Button An OFF-OUT combination disconnects that output from the inputs; an OFF-ALL combination disconnects all the outputs

7 7-segment display Displays the selected audio or video input switched to the output (marked above each input). When audio breakaway mode

is selected the Audio button illuminates. When the video breakaway mode is selected the Video button illuminates.

Also displays the number of IN and OUT ports, the firmware version number, and the MACHINE #. Refer to Section 7.1

8 VIDEO Button When pressed actions relate to video. When the video breakaway mode is selected the VIDEO button illuminates

9 AFV Button When pressed actions relate to video and audio channels. Audio channels follow the video channels. When the AFV mode

is selected the AFV button illuminates

10 AUDIO Button When pressed actions relate to audio. When the audio breakaway mode is selected the AUDIO button illuminates

11 STO (STORE) Button Pressing STO followed by an output button stores the current setting

For example, press STO and then the Output button # 3 to store in Setup # 3

12 RCL (RECALL) Button Pressing the RCL button and the corresponding OUTPUT key recalls a setup from the non-volatile memory. The stored

status flashes. Pressing a different OUTPUT button lets you view another setup. After making your choice, pressing the

RCL button again implements the new status

Only view, nothing is implemented at this stage

13 TAKE Button Pressing TAKE toggles the mode between the CONFIRM mode and the AT ONCE mode (user confirmation per action is

unnecessary). When in Confirm mode, the TAKE button illuminates

14 LOCK Button Disengages the front panel switches

4VS-5x5 – Overview

VS-5x5 – Overview 5

Figure 2: VS-5x5 Video Audio Matrix Switcher - Rear Panel

# Feature Function

15 LOOP BNC Connector For looping the video inputs

16 SYNC BNC Connector Connects to the external SYNC source

17 Composite BNC OUT Connectors Connects to the composite video acceptors (from 1 to 5)

18 Composite BNC IN Connectors Connects to the composite video sources (from 1 to 5)

19 INPUT Terminal Block Connectors Connect to the balanced stereo audio sources (from 1 to 5)

20 REMOTE IR Socket

Covered by a cap. The 3.5mm mini

connector at the end of the internal IR

connection cable fits through this opening

Connect to an external IR receiver unit for controlling the machine via an IR remote

controller instead of using the front panel IR receiver

Optional. Can be used instead of the front panel (built-in) IR receiver to remotely control the

machine (only if the internal IR connection cable has been installed)

21 OUTPUT Terminal Block Connectors Connect to the balanced stereo audio acceptors (from 1 to 5)

22 RS-232 9-pin D-sub (F) Port Connects to the PC or the Remote Controller

23 RESET Button Press to reset the unit to its original factory settings, or after firmware upgrade

24 FLASH PROG Button Using a screwdriver if required, push in for “Program” to upgrade to the latest Kramer

firmware or release for Normal (the factory default)

25 RS-485 Terminal Block Port Pin G is for ground connection; pins B (-) and A (+) are for RS-485

26 DIP-switches DIP-switches for setup of the unit (1, 2, 3 and 4 are for setting the Machine #; 5 is for the

Vertical Interval Source; 8 is for RS-485 termination)

27 Power Connector with Fuse AC connector enabling power supply to the unit

6 VS-5x5 - Installing in a Rack

4 Installing in a Rack

VS-5x5 - Connecting the VS-5x5 5x5 Video Audio Matrix Switcher 7

5 Connecting the VS-5x5 5x5 Video Audio

Matrix Switcher

Always switch off the power to each device before connecting it to your

VS-5x5. After connecting your VS-5x5, connect its power and then

switch on the power to each device.

This section describes how to connect the VS-5x5. In particular, how to:

•Connect the VS-5x5 rear panel (see Section 5.1)

•Control via RS-232, for example, using a PC (see Section 5.2)

•Control via RS-485 (see Section 5.3)

•Connect the audio inputs/outputs (see Section 5.4)

•Set the DIP-switches (see Section 5.5)

5.1 Connecting the VS-5x5 Rear Panel

To connect the VS-5x5, do the following:

Switch OFF the power on each device before connecting it to your VS-5x5. After connecting your VS-5x5,

switch on its power and then switch on the power on each device. DO NOT push in the rear panel Flash

Program “Program” button and DO NOT push in the underside Flash Program “Reset” button. These are only

used for upgrade to the latest Kramer firmware.

1. Connect up to 5 composite video sources (for example, composite video

recorders) to the 5 BNC input connectors, and connect up to 5 balanced

stereo audio sources to the “AUDIO INPUTS” terminal block connectors.

See Section 5.4 for a description of how to connect a balanced/unbalanced stereo audio input/output

2. Connect the 5 composite video output connectors to up to 5 composite video

acceptors and connect the corresponding “AUDIO OUTPUTS” terminal

block connectors to the balanced stereo audio acceptors.

When less than five outputs are required, connect only those outputs that are required, and leave the

other outputs unconnected

3. Set the DIP-switches (see Section 5.5).

4. Connect a PC and/or controller (if required) to the RS-232 port (see Section

5.2) and/or RS-485 port (see Section 5.3).

Andere Handbücher für VS-5x5

Inhaltsverzeichnis

Andere Kramer Matrix-Umschalter Handbücher

Kramer

Kramer VS-42HN Bedienungsanleitung

Kramer

Kramer Sierra Pro XL 1616V5S Bedienungsanleitung

Kramer

Kramer VS-3232Vxl Bedienungsanleitung

Kramer

Kramer VP-725DS Bedienungsanleitung

Kramer

Kramer VS-88UHD Bedienungsanleitung

Kramer

Kramer MV-4X Bedienungsanleitung

Kramer

Kramer XL 1204VS Bedienungsanleitung

Kramer

Kramer VS-2616 Bedienungsanleitung

Kramer

Kramer VS-622DT Bedienungsanleitung

Kramer

Kramer 88V5S Bedienungsanleitung

Kramer

Kramer VS-6464DN-EM Bedienungsanleitung

Kramer

Kramer VP-4x8 Bedienungsanleitung

Kramer

Kramer VS-162AV Bedienungsanleitung

Kramer

Kramer XL 1208VS Bedienungsanleitung

Kramer

Kramer VP-16x18AK Bedienungsanleitung

Kramer

Kramer VS-1616D Bedienungsanleitung

Kramer

Kramer VS-88HDCPxl Bedienungsanleitung

Kramer

Kramer VS-6EII Bedienungsanleitung

Kramer

Kramer VS-1616DN-MD Bedienungsanleitung

Kramer

Kramer VS-6464DN-EM Bedienungsanleitung

Kramer

Kramer Sierra Video 1204V3 Bedienungsanleitung

Kramer

Kramer VS-44HDCP Bedienungsanleitung

Kramer

Kramer ASPEN-32UFX Bedienungsanleitung

Kramer

Kramer VP-88K Bedienungsanleitung

Beliebte Matrix-Umschalter Handbücher anderer Marken

Broadcast Tools

Broadcast Tools SS 8.2 Bedienungsanleitung

Altimium

Altimium MATF32 Bedienungsanleitung

ALFAtron

ALFAtron ALF-MUK44N Bedienungsanleitung

Monoprice

Monoprice Blackbird 15377 Bedienungsanleitung

PTN

PTN FMX12 Bedienungsanleitung

CYP

CYP nT15GX01 Bedienungsanleitung

TESmart

TESmart HMA0402A40 Bedienungsanleitung

Octava

Octava HD4XSTPMX Bedienungsanleitung

Intelix

Intelix FLX-88 Betriebsanleitung

Roland

Roland XS-1HD Bedienungsanleitung

Atlona

Atlona AT-HDMI-22M Bedienungsanleitung

Link

Link HD8X8 Bedienungsanleitung

AMX

AMX AVS-OP-2020-117 Anleitungen und Rezepte

Lindy

Lindy 38042 Bedienungsanleitung

Extron electronics

Extron electronics MTPX Plus Series Bedienungsanleitung

Key Digital

Key Digital Champion KD-16x16CS Bedienungsanleitung

Shinybow USA

Shinybow USA SB-8811 Bedienungsanleitung

Optimus

Optimus Compact Bedienungsanleitung