Kramer VS-88HDxl Bedienungsanleitung

Kramer Electronics, Ltd.

Preliminary

USER MANUAL

Model:

VS-88HDxl

8x8 3G SD/HD-SDI Matrix Switcher

Contents

1Introduction 1

2Getting Started 1

2.1 Quick Start 2

3Overview 3

4Your VS-88HDxl 8x8 3G SD/HD-SDI Matrix Switcher 4

4.1 Using the IR Transmitter 7

5Installing the VS-88HDxl in a Rack 8

6Connecting the VS-88HDxl 9

6.1 Connecting the VS-88HDxl in the Single Link Mode 9

6.2 Connecting the VS-88HDxl in the Dual Link Mode 11

6.3 Setting the Working Mode 13

6.4 Connecting the RS-232 Port 13

6.4.1 Determining the Machine Number 13

6.4.2 Setting the DIP-Switches 14

6.5 Connecting a PC or Controller to the RS-485 Port 15

6.5.1 Setting the Address Switches 15

6.5.2 Setting the Line Termination 15

6.6 Switching Genlocked Video Signals 16

6.7 Connecting the Ethernet Port 16

6.7.1 Connecting the ETHERNET Port Directly to a PC (Crossover Cable) 16

6.7.2 Connecting the ETHERNET Port via a Network Hub (Straight-Through Cable) 18

6.8 Configuring the Ethernet Port 18

6.9 Controlling via the Ethernet Port 19

6.10 Using the Ethernet Reset Button 19

7Operating the VS-88HDxl 20

7.1 Operating the VS-88HDxl from the Front Panel 20

7.1.1 Power On Display 20

7.1.2 Using the AT ONCE and CONFIRM Modes 20

7.1.3 Switching in the AT ONCE Mode 20

7.1.4 Toggling Between Modes 21

7.1.5 Switching in the CONFIRM Mode 21

7.1.6 Storing an Input/Output Configuration 21

7.1.7 Recalling an Input/Output Configuration 22

7.1.8 Locking the Front Panel 22

7.1.9 Switching Protocols 22

7.1.10 Indicating Errors 22

7.2 Using Serial Commands 23

7.3 Using the Infrared Remote Controller 23

8Technical Specifications 23

9Using the P3K Wizard 24

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Contents

9.1 Changing the Device Parameters 24

9.2 Updating the VS-88HDxl Firmware 26

10 Kramer Protocol 3000 27

10.1 Switching Protocols 27

10.2 Kramer Protocol 3000 Syntax 28

10.2.1 Host Message Format 28

10.2.1.1 Simple Command 28

10.2.1.2 Command String 28

10.2.2 Device Message Format 28

10.2.2.1 Device Long Response 28

10.2.3 Command Terms 29

10.2.4 Entering Commands 29

10.2.5 Command Forms 30

10.2.6 Command Chaining 30

10.2.7 Maximum String Length 30

10.2.8 Backward Support 30

10.3 Kramer Protocol 3000 Commands 31

10.3.1 Device Initiated Messages 31

10.3.2 Result and Error Codes 31

10.3.3 Basic Routing Commands 31

10.3.4 Preset Commands 32

10.3.5 Operation Commands 32

10.3.6 Machine Information Commands 32

10.3.7 Identification Commands 33

10.3.8 Network Setting Commands 33

11 Hex Table (Protocol 2000) 34

12 Kramer Protocol 2000 35

Figures

Figure 1: VS-88HDxl 8x8 3G SD/HD-SDI Matrix Switcher 5

Figure 2: Connecting the VS-88HDxl 8x8 3G SD/HD-SDI Matrix Switcher 10

Figure 3: VS-88HDxl Dual-Link Inputs and Outputs 12

Figure 4: Connecting the Dual-Link VS-88HDxl 3G HD/SD-SDI Matrix Switcher 12

Figure 5: DIP-Switch Settings 14

Figure 6: Local Area Connection Properties Window 17

Figure 7: Internet Protocol (TCP/IP) Properties Window 17

Figure 8: Connect Screen 18

Figure 9: Device Properties Screen 19

Figure 10: P3K Wizard Screen 24

Figure 11: Connect Window 25

Figure 12: Device Properties Window 26

Contents

iii

Tables

Table 1: Front Panel VS-88HDxl 8x8 3G SD/HD-SDI Matrix Switcher 6

Table 2: Rear Panel VS-88HDxl 8x8 3G SD/HD-SDI Matrix Switcher 6

Table 3: Machine # DIP-Switch Settings 14

Table 4: DIP-Switch Settings 14

Table 5: Genlock Settings 16

Table 6: VS-88HDxl Technical Specifications 23

Table 7: VS-88HDxl Hex Codes for Switching via RS-232/RS-485 34

Table 8: Protocol Definitions 35

Table 9: Instruction Codes for Protocol 2000 36

Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast

range of problems that confront the video, audio, presentation, and

broadcasting professional on a daily basis. In recent years, we have

redesigned and upgraded most of our line, making the best even better! Our

1,000-plus different models now appear in 11 groups1

Thank you for purchasing the Kramer VS-88HDxl 8x8 3G SD/HD-SDI

Matrix Switcher, which is ideal for:

that are clearly

defined by function.

•Professional broadcasting and production studios

•Presentation applications

The package includes the following items:

•The VS-88HDxl 8x8 3G SD/HD-SDI Matrix Switcher

•RC-IR3remote control (with manual)

•Power cord2

•This user manual

2 Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and

packaging materials for possible future shipment

•Review the contents of this user manual

•Use Kramer high performance high-resolution cables4

1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Systems;

GROUP 4: Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;

GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity;

GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Products

2 We recommend that you use only the power cord supplied with this device

3 Download up-to-date Kramer user manuals from our Web site at http://www.kramerelectronics.com

4 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Getting Started

2.1 Quick Start

This quick start chart summarizes the basic setup and operation:

Overview

3 Overview

The VS-88HDxl is a high-performance matrix switcher for 3G HD-SDI and

HD-SDI dual link signals. The unit can switch up to eight single link inputs

to any or all of eight single link outputs or four dual link inputs to any or all

of four dual link outputs.

In particular, the VS-88HDxl features:

•Operation of up to 2.97Gbps – enabling it to be used for standard

definition, high-definition and 3G high-definition serial digital

video signals (SD/HD/3G HD-SDI)

•SMPTE 259M, 292M, 424M, and 372M (dual link) compliance

and support for data rates of 270Mbps, 1483.5Mbps, 1485Mbps

and 2970Mbps

•Cable equalization up to 350m for SD1signals, 140m for 1.5GHz

HD2

•Reclocking and equalization on each input, storing and recalling

setups, and a TAKE button for the execution of multiple switches

all at once

signals, and 120m for 3GHz HD signals

•The ability to switch genlocked video signals according to the

timing of the genlock reference input. Switching according to the

bi-level or tri-level genlock3

The VS-88HDxl is housed in a 19" 1U rack-mountable enclosure, and is fed

from a 100-240 VAC universal switching power supply. The unit can be

controlled via the front panel buttons or via:

input according to SMPTE RP-168

•An infrared remote control transmitter

•An infrared remote extension cable transmitter

•Remotely, by RS-232 or RS-485 serial commands transmitted by a

PC, touch screen system, or other serial controller

•The Ethernet

•By default, the VS-88HDxl is operated using the Kramer 3000

protocol (see section 7.1.9 for details of how to switch to Protocol

2000 and section 9.2 for the relevant protocol commands)

1 Standard Definition (SD) means an NTSC or PAL compatible video format, consisting of 480 (for NTSC) or 576 (for PAL)

lines of interlaced video

2 High Definition (HD) means a video format, consisting of 720 active lines of progressive video or 1080 lines of progressive

or interlaced video

3 The sources must be genlocked to the GENLOCK input in order to switch clearly

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Your VS-88HDxl 8x8 3G SD/HD-SDI Matrix Switcher

To achieve the best performance:

•Use only good quality connection cables1

•Avoid interference from neighboring electrical appliances that may

adversely influence signal quality and position your Kramer

VS-88HDxl away from moisture, excessive sunlight and dust

to avoid interference,

deterioration in signal quality due to poor matching, and elevated

noise levels (often associated with low quality cables)

4 Your VS-88HDxl 8x8 3G SD/HD-SDI Matrix Switcher

Figure 1, Table 1, and Table 2define the VS-88HDxl 8x8 3G SD/HD-SDI

Matrix Switcher.

1 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com

Your VS-88HDxl 8x8 3G SD/HD-SDI Matrix Switcher

Figure 1: VS-88HDxl 8x8 3G SD/HD-SDI Matrix Switcher

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Your VS-88HDxl 8x8 3G SD/HD-SDI Matrix Switcher

Table 1: Front Panel VS-88HDxl 8x8 3G SD/HD-SDI Matrix Switcher

Feature

Function

1 IR Receiver The yellow LED illuminates when receiving signals from the infrared remote

control transmitter

2 POWER LED Illuminates when the unit is ON

3 ALL Button Pressing ALL followed by an INPUT button, connects that input to all outputs

4 OFF Button Pressing OFF+OUT disconnects that output from the inputs;

pressing OFF+ALL disconnects all the outputs;

a long press toggles between dual link and normal mode

5 IN SELECT Buttons Select the input to switch to the output;

long presses on buttons IN1 to IN5 change the genlock timing (see Table 5)

6 OUT SELECT Buttons Select the output to which the input is switched

7 STO (STORE) Button Pressing STO followed by an IN / OUT button stores the current setting

8 RCL (RECALL) Button Pressing the RCL button and the corresponding INPUT / OUTPUT key recalls a

setup from the non-volatile memory

9 LOCK Button A long press toggles activation/inactivation of the front panel buttons;

pressing LOCK+OUT2 selects Protocol 2000; pressing LOCK+OUT3 selects

Protocol 3000

10 TAKE Button Pressing TAKE toggles the mode between the CONFIRM mode and the AT

ONCE mode (user confirmation per action is unnecessary)

11 7-segment Display Displays the selected input switched to the output (marked above each input)

Table 2: Rear Panel VS-88HDxl 8x8 3G SD/HD-SDI Matrix Switcher

Feature

Function

12 GENLOCK BNC Connector Connects to the genlock source

13 TERM HI-Z/75Ω Pushbutton Press to terminate the genlock source (75Ω) or release for looping

14 LOOP BNC Connector Connects to the genlock connector of the next unit in the line

15 INPUT BNC Connectors Connects to the serial digital video sources

16 RS-232 9-pin D-sub (F) Port Connects to the PC or the remote controller

17 PROG/RS-485 TERM

DIP-switches PROG DIP-switch enables microcontroller firmware upgrade

RS-485 TERM DIP-switch terminates the RS-485 line with a 120Ω load

18 RS-485 Terminal Block Port Pins B (-) and A (+) are for RS-485;

Pin G may be connected to the shield (if required)

19 ETHERNET RJ-45 Connector Connects to the PC or other Serial Controller through computer networking

LAN

20 MACH # DIP-switches DIP-switches 1-4 for setting the Machine Address of the unit

21 ETH RESET Button Press to reset to factory default definitions

IP number −192.168.1.39, Mask – 255.255.0.0, Gateway – 0.0.0.0

OUTPUT BNC Connectors Connect to the serial digital video acceptors

23 REMOTE IR 3.5mm Mini Jack Connect to an external IR receiver unit for controlling the machine via an IR

remote controller (instead of using the front panel IR receiver)2

Power Connector with Fuse AC connector enabling power supply to the unit

25 Power Switch Turns the power to the unit ON and OFF

1 First disconnect the power cord and then connect it again while pressing the ETH Factory Reset button. The unit powers up

and loads its memory with the factory default definitions and erases all stored presets

2 Optional. Can be used instead of the front panel (built-in) IR receiver to remotely control the VS-88HDxl (only if the

internal IR connection cable has been installed) (See section 4.1)

Andere Handbücher für VS-88HDxl

Inhaltsverzeichnis

Andere Kramer Matrix-Umschalter Handbücher

Kramer

Kramer Sierra Video 4864V5xl Bedienungsanleitung

Kramer

Kramer VS-88FO Bedienungsanleitung

Kramer

Kramer VP-88ETH Bedienungsanleitung

Kramer

Kramer VS-4228 Bedienungsanleitung

Kramer

Kramer VS-48HDCPxl Bedienungsanleitung

Kramer

Kramer Sierra Video 4832V5Sxl Bedienungsanleitung

Kramer

Kramer VS-88UT Bedienungsanleitung

Kramer

Kramer VS-5x4 Bedienungsanleitung

Kramer

Kramer Sierra Video 3248V5xl Bedienungsanleitung

Kramer

Kramer VS-88H2 Bedienungsanleitung

Kramer

Kramer VS-6464DN-EM Bedienungsanleitung

Kramer

Kramer VP-729 Bedienungsanleitung

Kramer

Kramer VP-4x8AK Bedienungsanleitung

Kramer

Kramer VS-66H Bedienungsanleitung

Kramer

Kramer Sierra Video 1204V3 Bedienungsanleitung

Kramer

Kramer 1616D Bedienungsanleitung

Kramer

Kramer VS-808TP Bedienungsanleitung

Kramer

Kramer VS-3232A Bedienungsanleitung

Kramer

Kramer VS-44HN Bedienungsanleitung

Kramer

Kramer XL 1616V4S Bedienungsanleitung

Kramer

Kramer VP-8x8 Bedienungsanleitung

Kramer

Kramer TailorMade Bedienungsanleitung

Kramer

Kramer 88DS Bedienungsanleitung

Kramer

Kramer VS-81HD Bedienungsanleitung

Beliebte Matrix-Umschalter Handbücher anderer Marken

Broadcast Tools

Broadcast Tools SS 8.2 Bedienungsanleitung

Altimium

Altimium MATF32 Bedienungsanleitung

ALFAtron

ALFAtron ALF-MUK44N Bedienungsanleitung

Monoprice

Monoprice Blackbird 15377 Bedienungsanleitung

PTN

PTN FMX12 Bedienungsanleitung

CYP

CYP nT15GX01 Bedienungsanleitung

TESmart

TESmart HMA0402A40 Bedienungsanleitung

Octava

Octava HD4XSTPMX Bedienungsanleitung

Intelix

Intelix FLX-88 Betriebsanleitung

Roland

Roland XS-1HD Bedienungsanleitung

Atlona

Atlona AT-HDMI-22M Bedienungsanleitung

Link

Link HD8X8 Bedienungsanleitung

AMX

AMX AVS-OP-2020-117 Anleitungen und Rezepte

Lindy

Lindy 38042 Bedienungsanleitung

Extron electronics

Extron electronics MTPX Plus Series Bedienungsanleitung

Key Digital

Key Digital Champion KD-16x16CS Bedienungsanleitung

Shinybow USA

Shinybow USA SB-8811 Bedienungsanleitung

Optimus

Optimus Compact Bedienungsanleitung