Kramer FC-101Net Bedienungsanleitung

FC‑101NET Quick Start

P/N:

2900- 300861QS

Rev:

Scan for full manual

FC‑101NET Quick Start Guide

This guide helps you install and use your FC‑101NET for the first time.

Go to www.kramerav.com/downloads/FC-101NET to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

FC‑101NET Dual Dante Interface

1 Bracket set

Double-sided adhesive dual lock tape

1 Quick start guide

Step 2: Get to know your FC‑101NET

Feature

Function

ON LED

Lights green when the device receives power.

SYS LED

Lights green when Dante network is available; red if an error has occurred.

SYNC LED

Lights green for digital audio normal operation.

Flashes green when this unit is the Master clock.

Lights red if an error has occurred.

Dante PoE RJ-45 Port

Connect to the Dante audio source via the Network and provide Power over Ethernet

(PoE) to the device.

By default, DHCP is enabled.

DEF Push Button

To reset/reboot the device, press and release the button.

To reset to factory settings, press and hold the button for 30 seconds.

OUTPUTS 1 and 2 5-pin Terminal

Block Connector

Connect to a single balanced stereo audio output or two separate mono outputs

(+, –, G).

RS-232 3-pin Terminal Block

Connector

Connect to a serial controller to control this device.

Step 3: Install FC‑101NET

Install FC‑101NET using one of the following methods:

Attach one side of the adhesive dual lock tape to the metallic surface of the device and the

other to a flat surface.

Fasten a bracket (included) on each side of the unit and attach it to a flat surface. For more

information go to www.kramerav.com/downloads/FC-101NET.

Mount the unit in a rack using an optional RK-4PT rack adapter.

Step 4: Connect the inputs and outputs

Always switch OFF the power on each device before connecting it to your FC‑101NET. For best results, we recommend that

you always use Kramer high-performance cables to connect AV equipment to FC‑101NET.

Step 5: Connect the power

Once connected, PoE is provided via the Dante port.

Safety Instructions

Caution:

There are no operator serviceable parts inside the unit.

Warning:

Disconnect the power before installing.

See www.KramerAV.com for updated safety information.

Step 6: Operate FC‑101NET

Operate FC‑101NET via:

Remotely, RS-232 serial commands

transmitted by a touch screen system, PC, or

other serial controller.

RS-232

Baud Rate:

115200

Parity:

None

Stop Bits:

Data Bits:

Command Format:

ASCII

Example: (set the volume output to -6dB): #AUD-LVL 2,1,-6<CR>

Technical Specifications

Outputs

1 Balanced Stereo Audio/2 Mono

Audio

On a 5-pin terminal block

Port

1 Dante

On an RJ-45 connector

Control

Dante IP control matrix and Kramer Protocol

3000

Power

Consumption

48V DC, 100mA

Source

48V DC (PoE)

Cooling

Convection Ventilation

Environmental

Conditions

Operating Temperature

0° to +40°C (32° to 104°F)

Storage Temperature

-40° to +70°C (-40° to 158°F)

Humidity

10% to 90%, RHL non-condensing

Regulatory Compliance

Safety

Environmental

RoHs, WEEE

Enclosure

Size

Pico TOOL

Type

Aluminum

General

Net Dimensions (W, D, H)

6.2cm x 5.2cm x 2.4cm (2.4” x 2” x 1”) W, D, H

Shipping Dimensions (W, D, H)

15.7 cm x 12cm x 8.7cm (6.2” x 4.7” x 3.4”) W,

D, H

Net Weight

0.08kg (0.2lb)

Shipping Weight

0.23kg (0.5lb)

Accessories

Included

Bracket set, double-sided adhesive dual lock

tape

Optional

RK-4PT rack adapter

Specifications are subject to change without notice at www.kramerav.com

Andere Handbücher für FC-101Net

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kramer Medienkonverter Handbücher

Kramer

Kramer VP-426C Bedienungsanleitung

Kramer

Kramer FC-32 Bedienungsanleitung

Kramer

Kramer VW-9 Bedienungsanleitung

Kramer

Kramer VM-2DH Bedienungsanleitung

Kramer

Kramer VM-2DH Bedienungsanleitung

Kramer

Kramer ACC3-12-SP Bedienungsanleitung

Kramer

Kramer FC-16 Bedienungsanleitung

Kramer

Kramer FC-7501 Bedienungsanleitung

Kramer

Kramer VA-256XL Bedienungsanleitung

Kramer

Kramer TOOLS VP-100 Bedienungsanleitung

Kramer

Kramer VM-1120 Bedienungsanleitung

Kramer

Kramer FC-15 Bedienungsanleitung

Kramer

Kramer FC-101Net Bedienungsanleitung

Kramer

Kramer FC-2 Bedienungsanleitung

Kramer

Kramer FC-32 Bedienungsanleitung

Kramer

Kramer TP-580TD Bedienungsanleitung

Kramer

Kramer VM-4Hxl Bedienungsanleitung

Kramer

Kramer FC-70R Bedienungsanleitung

Kramer

Kramer VM-1110xl Bedienungsanleitung

Kramer

Kramer MV-5 Bedienungsanleitung

Kramer

Kramer VM-212HDMI Bedienungsanleitung

Kramer

Kramer 6808HDxl Bedienungsanleitung

Kramer

Kramer VP-472 Bedienungsanleitung

Kramer

Kramer KDS-10 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung