Kramer FC-46H2 Bedienungsanleitung

FC-46H2 Quick Start

P/N:

2900- 300873QS

Rev:

Scan for full manual

FC-46H2 Quick Start Guide

This guide helps you install and use your FC-46H2 for the first time.

Go to www.kramerav.com/downloads/FC-46H2 to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

FC-46H2 4K HDMI Audio De-Embedder

4 Rubber feet

1 Bracket set

1 Power adapter and cord

1 Quick start guide

Step 2: Get to know your FC-46H2

# Feature Function

PROG Mini USB Port

Connect to a PC to perform firmware upgrades (via K-Upload) and work with the

EDID Designer.

K-Upload and EDID Designer can be downloaded from our Web site at:

www.kramerav.com/downloads/FC-46H2).

To use the mini USB port, you need to download the Kramer USB driver from our

Web site at: www.kramerav.com/support/product_downloads.asp and install it.

SETUP 4-way DIP-switch

Set the device behavior.

All the DIP-switches are set to off (up) by default.

Feature

DIP-switch Settings

EDID Mode

On (down) — EDID locked.

Off (up) — EDID pass-through mode.

When EDID is locked, the audio parameters are set

as defined by DIP-switch 2. In pass-through mode,

the DIP-switch 2 setup is ignored.

2 Audio Support On (down) — Limits the audio to 2-channel LPCM.

Off (up) — Passes the audio parameters.

This setup is enabled only after DIP-switch 1 is set

to On (down; EDID locked).

3/4

Analog Audio

Amplification

Off (up)

On (down)

Off (up)

On (down)

Off (up)

On (down)

Amplification Level

0dB

6dB

12dB

18dB

AUDIO SOURCE

Selector Button

Press to route the audio source from HDMI IN or from HDMI OUT (ARC) to the

audio outputs.

IN LED

Lights green when HDMI IN is selected.

OUT LED

Lights green when HDMI OUT is selected (ARC).

AUDIO OUT

LEDs

DIGITAL

Lights green when a de-embedded audio signal is present on the S/PDIF output.

ANALOG

Lights green when a de-embedded audio signal is present on the ANALOG

audio output.

ON LED

Lights green when powered.

HDMI™ IN Connector

Connect to an HDMI source.

HDMI™ OUT Connector

Connect to an HDMI acceptor.

# Feature Function

8 AUDIO OUT

Connectors

ANALOG 5-pin

Terminal Block

Connect to an analog audio acceptor.

S/PDIF RCA

Connect to a digital audio acceptor.

MUTE 2-pin Terminal Block Connector

Momentarily connect the MUTE pin to GND to mute the analog audio output.

5V DC Power Connector

Connect to the Kramer power adapter.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Step 3: Install FC-46H2

Install FC-46H2 using one of the following methods:

•Attach the rubber feet and place the unit on a flat surface.

•Fasten a bracket (included) on each side of the unit and attach it to a flat surface.

For more information go to www.kramerav.com/downloads/FC-46H2.

•Mount the unit in a rack using the recommended rack adapter

(see www.kramerav.com/product/FC-46H2).

Step 4: Connect the inputs and outputs

Always switch OFF the power on each device before connecting it to your FC-46H2. For best results, we recommend that you

always use Kramer high-performance cables to connect AV equipment to FC-46H2.

Contact Closure Switches:

Mute the analog output by momentarily connecting the MUTE

pin to the GND.

Step 5: Connect the power

Connect the 5V DC power supply to FC-46H2 and plug it into the mains electricity.

Safety Instructions

Caution:

There are no operator serviceable parts inside the unit.

Warning:

Use only the Kramer Electronics power supply that is provided with the unit.

Warning:

Disconnect the power and unplug the unit from the wall before installing.

See www.KramerAV.com for updated safety information.

Andere Handbücher für FC-46H2

Inhaltsverzeichnis

Andere Kramer Medienkonverter Handbücher

Kramer

Kramer VP-501N Bedienungsanleitung

Kramer

Kramer VM-28H Bedienungsanleitung

Kramer

Kramer VM-8H Bedienungsanleitung

Kramer

Kramer TOOLS VP-100 Bedienungsanleitung

Kramer

Kramer 810 Bedienungsanleitung

Kramer

Kramer KDS-EN6 Bedienungsanleitung

Kramer

Kramer VM-80VN Bedienungsanleitung

Kramer

Kramer Tools 482xl Bedienungsanleitung

Kramer

Kramer VP-441 Bedienungsanleitung

Kramer

Kramer VP-424 Bedienungsanleitung

Kramer

Kramer VP-480 Bedienungsanleitung

Kramer

Kramer VM-24H Bedienungsanleitung

Kramer

Kramer FC-321 Bedienungsanleitung

Kramer

Kramer VP-434 Bedienungsanleitung

Kramer

Kramer DigiTOOLS 7408 Bedienungsanleitung

Kramer

Kramer KDS-100EN Bedienungsanleitung

Kramer

Kramer VM-24HC Bedienungsanleitung

Kramer

Kramer FC-31xl Bedienungsanleitung

Kramer

Kramer KDS-SW3-EN7 Bedienungsanleitung

Kramer

Kramer VW-9 Bedienungsanleitung

Kramer

Kramer VP-701XL Bedienungsanleitung

Kramer

Kramer VM-30CA Bedienungsanleitung

Kramer

Kramer FC-4046 Bedienungsanleitung

Kramer

Kramer VP-418 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung