Kramer VP-409 Bedienungsanleitung

VP-409 Quick Start

P/N:

2900- 301262QS

Rev:

Scan for full manual

VP-409 Quick Start Guide

This guide helps you install and use your VP-409 for the first time.

Go to www.kramerav.com/downloads/VP-409 to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

VP-409 Video to WUXGA Scaler

1 Set of rack ears

1 Power cord

1 Quick start guide

Step 2: Get to know your VP-409

Feature

Function

OUTPUT 15-pin HD Connector

Connects to the VGA-WUXGA acceptor

Y/C IN 4-pin Connector

Connects to an s-Video source

CV IN RCA Connector

Connects to a composite video source

5V DC

+5V DC connector for powering the unit

INPUT SELECT Button

Press to select between inputs

CV LED

Illuminates when the CV input is selected

Y/C LED

Illuminates when the Y/C input is selected

OUTPUT RES. Button

Press to select the desired output resolution

VGA LED

Illuminates when the VGA (640x480) resolution is selected

SVGA LED

Illuminates when the SVGA (800x600) resolution is selected

XGA LED

Illuminates when the XGA (1024x768) resolution is selected

1280x800 LED

Illuminates when the 1280x800 (Wide XGA) resolution is selected

1366x768 LED

Illuminates when the 1366x768 (WXGA) resolution is selected

WSXGA LED

Illuminates when the WSXGA (1440x900) resolution is selected

SXGA LED

Illuminates when the SXGA (1280x1024) resolution is selected

1400x1050 LED

Illuminates when the 1400x1050 (SXGA+) resolution is selected

1680x1050 LED

Illuminates when the 1680x1050 (WSXGA+) resolution is selected

UXGA LED

Illuminates when the UXGA (1600x1200) resolution is selected

1920x1080 LED

Illuminates when the 1920x1080 (1080p RGB) resolution is selected

WUXGA LED

Illuminates when the WUXGA (1920x1200) resolution is selected

Step 3: Mount VP-409

Install VP-409 using one of the following methods:

•Attach the rubber feet and place the unit on a flat surface.

•Fasten a bracket on each side of the unit and attach it to a flat surface

(see www.kramerav.com/downloads/VP-409).

•Mount the unit in a rack using the recommended rack adapter

(see www.kramerav.com/product/VP-409).

•Ensure that the environment (e.g., maximum ambient temperature &

air flow) is compatible for the device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

Step 4: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your VP-409.

To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/VP-409.

Using third-party cables may cause damage!

Step 5: Connect power

Connect the power cord to VP-409 and plug it into the mains electricity.

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the

terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

•Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only.

•To ensure continuous risk protection, replace fuses only according to the rating specified on the product label which located on the

bottom of the unit.

Andere Handbücher für VP-409

Andere Kramer Medienkonverter Handbücher

Kramer

Kramer KDS-SW3-EN7 Bedienungsanleitung

Kramer

Kramer FC-101Net Bedienungsanleitung

Kramer

Kramer FC-15 Bedienungsanleitung

Kramer

Kramer FC-7501 Bedienungsanleitung

Kramer

Kramer FC-42 Bedienungsanleitung

Kramer

Kramer FC-340S Bedienungsanleitung

Kramer

Kramer VP-506 Bedienungsanleitung

Kramer

Kramer DigiTOOLS 6410N Bedienungsanleitung

Kramer

Kramer VP-790 Bedienungsanleitung

Kramer

Kramer PIP-400 Bedienungsanleitung

Kramer

Kramer VM-2DH Bedienungsanleitung

Kramer

Kramer VP-428H2 Bedienungsanleitung

Kramer

Kramer VP-25xl Bedienungsanleitung

Kramer

Kramer VP-451 Bedienungsanleitung

Kramer

Kramer VM-4DH Bedienungsanleitung

Kramer

Kramer VM-4UX Bedienungsanleitung

Kramer

Kramer VS-21DT Bedienungsanleitung

Kramer

Kramer VP-426C Bedienungsanleitung

Kramer

Kramer VA-1VGA Bedienungsanleitung

Kramer

Kramer VP-792 Bedienungsanleitung

Kramer

Kramer PT-1SPDIF Bedienungsanleitung

Kramer

Kramer KIT-500 Bedienungsanleitung

Kramer

Kramer VM-4HDx1 Bedienungsanleitung

Kramer

Kramer KDS-EN3 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung