Kramer PT-571HDCP Bedienungsanleitung

KRAMER ELECTRONICS LTD.

USER MANUAL

MODELS:

PT-571HDCP

DVI Line Transmitter

PT-572HDCP+

DVI Line Receiver

P/N: 2900-000689 Rev 8

PT-571HDCP/PT-572HDCP+ – Contents

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 2

2.3 Recycling Kramer Products 3

2.4 Accessory to Medical Equipment (IEC 60601-1-2) 3

3Overview 4

3.1 Using Twisted Pair Cable 5

3.2 About the Power Connect™ Feature 5

4Defining the PT-571HDCP DVI Line Transmitter 6

5Defining the PT-572HDCP+ DVI Line Receiver 7

6Connecting the Transmitter Receiver Pair 8

6.1 Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors 10

7Technical Specifications 11

Figures

Figure 1: PT-571HDCP DVI Line Transmitter 6

Figure 2: PT-572HDCP+ DVI Line Receiver 7

Figure 3: Connecting the PT-571HDCP/PT-572HDCP+ Transmitter/Receiver Pair 9

Figure 4: CAT 5 PINOUT 10

PT-571HDCP/PT-572HDCP+ - Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront the video, audio, presentation, and broadcasting

professional on a daily basis. In recent years, we have redesigned and upgraded

most of our line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP

5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP

7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters, and GROUP

11: Sierra Products.

Congratulations on purchasing your Kramer PT-571HDCP and PT-572HDCP+

transmitter/receiver pair, which is ideal for the following typical applications:

Boardrooms, conference rooms and training rooms

Presentation systems

Signal distribution and home theater

Range extender for medical equipment

You must use Shielded Twisted Pair (STP) cabling with the

PT-571HDCP and PT-572HDCP+.

Use only a straight pin-to-pin cable with RJ-45 connectors that

meet the EIA /TIA 568B standard. Failure to do so may result in

damage to the device(s).

PT-571HDCP/PT-572HDCP+ - Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Go to http://www.kramerelectronics.com/support/product_downloads.asp

to check for up-to-date user manuals, application programs, and to check

if firmware upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

Position your Kramer PT-571HDCP and PT-572HDCP+ transmitter/receiver

pair away from moisture, excessive sunlight and dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

2.2 Safety Instructions

Caution:

There are no operator serviceable parts inside the unit

Warning:

Use only the Kramer Electronics input power wall

adapter that is provided with the unit

Warning:

Disconnect the power and unplug the unit from the wall

before installing

PT-571HDCP/PT-572HDCP+ - Getting Started

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country

go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

2.4 Accessory to Medical Equipment (IEC 60601-1-2)

In the modern medical environment remote access is essential, for example, to

transfer clinical data between doctors and to train to medical students. The

PT-571HDCP/PT-572HDCP+ pair is certified according to the IEC 60601-1-2,

Clause 2.1.3, Medical Electrical Equipment, Part 1: General Requirements for

EMC standard which is required when accessory devices are used at locations

where medical personnel and patients are present.

The PT-571HDCP/PT-572HDCP+ pair constitutes an optional component that can

be considered necessary and suitable as part of medical equipment or for use as

part of a medical system to provide real time simultaneous video feeds to those

present at the local medical environment and at remote locations. In this

environment, the PT-571HDCP/PT-572HDCP+ can be added to the system ONLY

if the connecting equipment has been evaluated and meets the IEC 60601-1-2

EMC standards. Note, that when attaching accessory devices to a digital or

analog interface, they must comply with the IEC standard for which they are used:

EMC Standard (IEC 60601-1-2), Information Technology equipment (IEC 60950-1

(2ed)).

PT-571HDCP/PT-572HDCP+ - Overview

3 Overview

The PT-571HDCP is a DGKat™ twisted pair transmitter for DVI signals. The

PT-571HDCP converts a DVI signal to a single twisted pair signal and the

PT-572HDCP+ converts the twisted pair signal back to a DVI signal.

The DVI Line Transmitter/Receiver system features:

Maximum data rate/bandwidth up to 4.95Gbps (1.65Gbps per graphic

channel), WUXGA, 1920x1080p

HDTV compatibility and HDCP compliance

Medical equipment compliance

EDID PassThru that passes EDID signals between the source and display

3D pass-through

Up to 90m (295ft) at SXGA, or up to 30m (98ft) at UXGA on shielded

BC−DGKat524 cable. Up to 90m (295ft) at SXGA, or up to 70m (230ft) at

UXGA on shielded BC−DGKat623 cable. Up to 100m (330ft) at SXGA, or up

to 80m (265ft) at UXGA on shielded BC−DGKat7a23 cable

Note that the transmission range depends on the signal resolution, graphics card and

display used. The distance using non-Kramer CAT 5, CAT 6 and CAT 7a cables may

not reach these ranges

DGKat™ Signal Integration – Kramer’s unique technology for converting

TMDS as well as control and communication to signals that run over twisted

pair cables

Power Connect™ that feeds 12V DC over the CAT 5 cable from transmitter

to receiver (see Section 3.2)

Ultra-Compact Pico TOOLS™ – 4 units can be rack mounted side−by−side

in a 1U rack space with the optional RK−4PT rack adapter.

Use only shielded cable where both ends of the shield are soldered

to ground to eliminate ESD interface.

PT-571HDCP/PT-572HDCP+ - Overview

3.1 Using Twisted Pair Cable

Kramer engineers have developed special twisted pair cables to best match our

digital twisted pair products; the Kramer: BC-DGKat524 (CAT 5 24 AWG), the

Kramer: BC-DGKat623 (CAT 6 23 AWG cable), and the Kramer: BC-DGKat7a23

(CAT 7a 23 AWG cable). These specially built cables significantly outperform

regular CAT 5/CAT 6/CAT 7a cables.

3.2 About the Power Connect™ Feature

The Power Connect™ feature here means that only one unit in a system, the

transmitter or receiver, needs to be connected to a power source when the

devices are within 90m (270ft) of each other. The Power Connect™ feature

applies as long as the cable can carry power and the distance does not exceed

90m on standard CAT 5 cable. For longer distances, heavy gauge cable should be

used (CAT 5 cable is still suitable for the video/audio transmission, but not for

feeding the power at these distances).

PT-571HDCP/PT-572HDCP+ - Defining the PT-571HDCP DVI Line Transmitter

4 Defining the PT-571HDCP DVI Line

Transmitter

The Kramer Pico TOOLS PT-571HDCP DVI Line Transmitter receives a DVI

signal, encodes it, and transmits it over a CAT 5 cable to the PT-572HDCP+. The

PT-571HDCP has:

A DVI input connector

An RJ-45 CAT 5 output connector

One power status LED

Figure 1: PT-571HDCP DVI Line Transmitter

Feature

Function

12V DC

+12V DC connector for powering the unit

DVIINConnector

Connect to the DVI source

OUT RJ-45 Connector

Connect to the IN RJ-45 connector on the PT-572HDCP+

ON LED

Lights only when the machine is powered (whether directly

from the power adapter or via the PT-572HDCP+) and an

input is connected

If no input is connected the unit invokes the power save

mode automatically turning off the power

PT-571HDCP/PT-572HDCP+ - Defining the PT-572HDCP+ DVI Line Receiver

5 Defining the PT-572HDCP+ DVI Line

Receiver

The Kramer Pico TOOLS PT-572HDCP+ DVI Line Receiver receives an encoded

signal over a CAT 5 cable transmitted from the PT-571HDCP, decodes it, and

converts it to a DVI output.

The PT-572HDCP+ has:

A DVI output connector

An RJ-45 CAT 5 input connector

One power status LED

Figure 2: PT-572HDCP+ DVI Line Receiver

Feature

Function

12V DC

+12V DC connector for powering the unit

DVIOUTConnector

Connect to the DVI acceptor

IN RJ-45 Connector

Connect to the OUT RJ-45 connector on the PT-571HDCP

ON LED

Lights red when receiving power only, orange when output

and power are attached, and yellow when both an active

input and output are attached

Andere Handbücher für PT-571HDCP

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kramer Empfänger Handbücher

Kramer

Kramer DigiTOOLS TP-551 Bedienungsanleitung

Kramer

Kramer 711N Bedienungsanleitung

Kramer

Kramer PT-571HDCP-MD Bedienungsanleitung

Kramer

Kramer PT-110 Bedienungsanleitung

Kramer

Kramer TOOLS TP-220HD Bedienungsanleitung

Kramer

Kramer KW-14T Bedienungsanleitung

Kramer

Kramer PT-571 Bedienungsanleitung

Kramer

Kramer 610T Bedienungsanleitung

Kramer

Kramer WP-872xr-EU-80/86-W Bedienungsanleitung

Kramer

Kramer TP-141 Bedienungsanleitung

Kramer

Kramer TP-200 Bedienungsanleitung

Kramer

Kramer PT-571 Bedienungsanleitung

Kramer

Kramer VP-427X2 Bedienungsanleitung

Kramer

Kramer TP-574 Bedienungsanleitung

Kramer

Kramer DigiTOOLS TP-580RA Bedienungsanleitung

Kramer

Kramer DigiTOOLS TP-551 Bedienungsanleitung

Kramer

Kramer KDS-EN2T Bedienungsanleitung

Kramer

Kramer 670T Bedienungsanleitung

Kramer

Kramer TOOLS VPN-12 Bedienungsanleitung

Kramer

Kramer TP-31 Bedienungsanleitung

Kramer

Kramer WP-571 Bedienungsanleitung

Kramer

Kramer 706XL Bedienungsanleitung

Kramer

Kramer 708 Bedienungsanleitung

Kramer

Kramer TP-578H Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung

Dish Network

Dish Network Satellite Television Bedienungsanleitung