KSB Trialine Montageanleitung

In-line Pump;In-line Twin Pump

Trialine / Trialine Z

Installation/Operating

Manual

Legal information/Copyright

Installation/Operating Manual Trialine / Trialine Z

Original operating manual

KSB Aktiengesellschaft Pegnitz

or processed for any other purpose, nor otherwise transmitted, published or made available to a third

party without KSB´s express written consent.

Subject to technical modification without prior notice.

Contents

Glossary ................................................................................................ 5

1 General ................................................................................................ 6

1.1 Principles .......................................................................................................... 6

1.2 Target group ................................................................................................... 6

1.3 Other applicable documents .......................................................................... 6

1.4 Symbols ............................................................................................................ 6

2 Safety ................................................................................................... 7

2.1 Key to safety symbols/markings ..................................................................... 7

2.2 General ............................................................................................................ 7

2.3 Intended use .................................................................................................... 7

2.4 Personnel qualification and training ............................................................. 8

2.5 Consequences and risks caused by non-compliance with these operating

instructions ...................................................................................................... 8

2.6 Safety awareness ............................................................................................. 8

2.7 Safety information for the operator/user ...................................................... 9

2.8 Safety information for maintenance, inspection and installation work ..... 9

2.9 Unauthorised modes of operation ................................................................. 9

3 Transport/Temporary Storage/Disposal ........................................... 10

3.1 Transport ....................................................................................................... 10

3.2 Storage and preservation ............................................................................. 10

3.3 Return to supplier ......................................................................................... 11

3.4 Disposal .......................................................................................................... 11

4 Description of the Pump (Set) .......................................................... 12

4.1 General .......................................................................................................... 12

4.2 Designation ................................................................................................... 12

4.3 Name plate .................................................................................................... 12

4.4 Design details ................................................................................................ 12

4.5 Configuration and function ......................................................................... 13

4.6 Noise characteristics ...................................................................................... 14

4.7 Scope of supply ............................................................................................. 14

4.8 Dimensions and weights ............................................................................... 14

5 Installation at Site ............................................................................. 15

5.1 Installing the pump set ................................................................................. 15

5.2 Piping ............................................................................................................. 15

5.3 Protective equipment ................................................................................... 16

5.4 Connection to power supply ........................................................................ 16

5.5 Checking the direction of rotation .............................................................. 17

Contents

Trialine / Trialine Z 3 of 36

6 Commissioning/Start-up/Shutdown ................................................. 18

6.1 Commissioning/start-up ................................................................................ 18

6.2 Shutdown/storage/preservation ................................................................... 21

6.3 Returning to service after storage ............................................................... 21

7 Servicing/Maintenance ...................................................................... 22

7.1 Safety regulations ......................................................................................... 22

7.2 Servicing/inspection ...................................................................................... 22

7.3 Drainage/disposal .......................................................................................... 24

7.4 Dismantling the pump set ............................................................................ 24

7.5 Reassembling the pump set .......................................................................... 26

8 Trouble-shooting ............................................................................... 28

9 Related Documents ........................................................................... 30

9.1 Typical installation positions ........................................................................ 30

9.2 General assembly drawing with list of components ................................... 31

10 EC Declaration of Conformity .......................................................... 32

11 Certificate of Decontamination ....................................................... 33

Index .................................................................................................. 34

Contents

4 of 36 Trialine / Trialine Z

Glossary

Back pull-out design

The complete back pull-out unit can be pulled

out without having to remove the pump casing

from the piping.

Back pull-out unit

Pump without pump casing; partly completed

machinery

Certificate of decontamination

A certificate of decontamination certifies that

the pump (set) has been properly drained to

eliminate any environmental and health

hazards arising from components in contact

with the fluid handled.

Close-coupled design

Motor directly fitted to the pump via a flange

or a drive lantern

Discharge line

The line which is connected to the discharge

nozzle

Hydraulic system

The part of the pump in which the kinetic

energy is converted into pressure energy

Pool of pumps

Pumps which are purchased and stored

independently of their later use

Pump set

Complete pump set consisting of pump, drive,

additional components and accessories

Suction lift line/suction head line

The line which is connected to the suction

nozzle

Glossary

Trialine / Trialine Z 5 of 36

1 General

1.1 Principles

This manual is supplied as an integral part of the type series and variants indicated

on the front cover. It describes the proper and safe use of this equipment in all

phases of operation.

The name plate indicates the type series/size and the main operating data.

In the event of damage, contact your nearest KSB service centre immediately to

maintain the right to claim under warranty.

Noise characteristics (⇨ Section 4.6 Page 14)

1.2 Target group

This manual is aimed at the target group of trained and qualified specialist technical

personnel. (⇨ Section 2.4 Page 8)

1.3 Other applicable documents

Table 1: Overview of other applicable documents

Document Contents

Sub-supplier product literature Operating manuals and other documentation of

accessories and integrated machinery components

1.4 Symbols

Table 2: Symbols used in this manual

Symbol Description

✓Conditions which need to be fulfilled before proceeding with the

step-by-step instructions

⊳Safety instructions

⇨Result of an action

⇨Cross-references

Step-by-step instructions

Note

Recommendations and important information on how to handle

the product

1 General

6 of 36 Trialine / Trialine Z

2 Safety

!DANGER

All the information contained in this section refers to hazardous situations.

2.1 Key to safety symbols/markings

Table 3: Definition of safety symbols/markings

Symbol Description

!DANGER

DANGER

This signal word indicates a high-risk situation which, if not

avoided, will result in death or serious injury.

!WARNING

WARNING

This signal word indicates a medium-risk situation which, if not

avoided, could result in death or serious injury.

CAUTION

This signal word indicates a hazardous situation which, if not

avoided, could damage the machine and its functions.

General hazard

In conjunction with one of the signal words this symbol indicates a

hazard which will or could result in death or serious injury.

Electrical hazard

In conjunction with one of the signal words this symbol indicates a

hazard involving electrical voltages and provides information

about protection against electrical voltages.

Machine damage

In conjunction with the signal word CAUTION this symbol indicates

a hazardous situation for the machine and its functions.

2.2 General

This manual contains general installation, operating and maintenance instructions

that must be observed to ensure safe pump operation and prevent personal injury

and damage to property.

The safety information in all sections of this manual must be complied with.

This manual must be read and completely understood by the responsible specialist

personnel/operators prior to installation and commissioning.

The contents of this manual must be available to the specialist personnel at the site

at all times.

Information attached directly to the pump must always be complied with and be

kept in a perfectly legible condition at all times. This applies to, for example:

▪Arrow indicating the direction of rotation

▪Markings for connections

▪Name plate

The operator is responsible for ensuring compliance with all local regulations which

are not taken into account in this manual.

2.3 Intended use

The pump set must only be operated within the operating limits described in the

other applicable documents.

▪Only operate pump sets which are in perfect technical condition.

▪Do not operate partially assembled pump sets.

▪Only use the pump set to handle the fluids described in the data sheet or product

literature of the pump model.

2 Safety

Trialine / Trialine Z 7 of 36

▪Never operate the pump set without the fluid to be handled.

▪Observe the minimum flow rates indicated in the data sheet or product literature

(to prevent overheating, bearing damage, etc).

▪Observe the maximum flow rates indicated in the data sheet or product

literature (to prevent overheating, mechanical seal damage, cavitation damage,

bearing damage, etc).

▪Do not throttle the flow rate on the suction side of the pump set (to prevent

cavitation damage).

▪Consult the manufacturer about any use or mode of operation not described in

the data sheet or product literature.

Prevention of foreseeable misuse

▪Never open discharge-side shut-off elements further than permitted.

– The maximum flow rate specified in the data sheet or product literature

would be exceeded.

– Risk of cavitation damage

▪Never exceed the permissible operating limits specified in the data sheet or

product literature regarding pressure, temperature, etc.

▪Observe all safety information and instructions in this manual.

2.4 Personnel qualification and training

All personnel involved must be fully qualified to install, operate, maintain and

inspect the machinery this manual refers to.

The responsibilities, competence and supervision of all personnel involved in

installation, operation, maintenance and inspection must be clearly defined by the

operator.

Deficits in knowledge must be rectified by sufficiently trained specialist personnel

training and instructing the personnel who will carry out the respective tasks. If

required, the operator can commission the manufacturer/supplier to train the

personnel.

Training on the pump (set) must always be supervised by technical specialist

personnel.

2.5 Consequences and risks caused by non-compliance with these operating

instructions

▪Non-compliance with these operating instructions will lead to forfeiture of

warranty cover and of any and all rights to claims for damages.

▪Non-compliance can, for example, have the following consequences:

–Hazards to persons due to electrical, thermal, mechanical and chemical

effects and explosions

– Failure of important product functions

– Failure of prescribed maintenance and servicing practices

– Hazard to the environment due to leakage of hazardous substances

2.6 Safety awareness

In addition to the safety information contained in this manual and the intended use,

the following safety regulations shall be complied with:

▪Accident prevention, health and safety regulations

▪Explosion protection regulations

▪Safety regulations for handling hazardous substances

▪Applicable standards and laws

2 Safety

8 of 36 Trialine / Trialine Z

2.7 Safety information for the operator/user

▪The operator shall fit contact guards for hot, cold and moving parts and check

that the guards function properly.

▪Never remove a contact guard while the pump is running.

▪Contain leakages (e.g at the shaft seal) of hazardous fluids handled (e.g.

explosive, toxic, hot) so as to avoid any danger to persons and the environment.

Adhere to all relevant laws.

▪Eliminate all electrical hazards. (In this respect refer to the applicable national

safety regulations and/or regulations issued by the local energy supply

companies.)

2.8 Safety information for maintenance, inspection and installation work

▪Modifications or alterations of the pump are only permitted with the

manufacturer's prior consent.

▪Use only original spare parts or parts authorised by the manufacturer. The use of

other parts can invalidate any liability of the manufacturer for consequential

damage.

▪The operator ensures that all maintenance, inspection and installation work is

performed by authorised, qualified specialist personnel who are thoroughly

familiar with the manual.

▪Carry out work on the pump set during standstill only.

▪The pump casing must have cooled down to ambient temperature.

▪Pump pressure must have been released and the pump must have been drained.

▪When taking the pump set out of service always adhere to the procedure

described in the manual. (⇨ Section 6.2.1 Page 21)

▪Decontaminate pumps which handle fluids posing a health hazard. (⇨ Section 7.3

Page 24)

▪As soon as the work is completed, re-install and/or re-activate any safety-relevant

and protective devices. Before returning the product to service, observe all

instructions on commissioning. (⇨ Section 6.1 Page 18)

2.9 Unauthorised modes of operation

Never operate the pump set outside the limits stated on the data sheet and in this

manual.

The warranty relating to the operating reliability and safety of the pump set supplied

is only valid if the equipment is used in accordance with its intended use. (⇨ Section

2.3 Page 7)

2 Safety

Trialine / Trialine Z 9 of 36

3 Transport/Temporary Storage/Disposal

3.1 Transport

DANGER

The pump set could slip out of the suspension arrangement.

Danger to life from falling parts!

▷Always transport the pump set in horizontal position.

▷Never attach the suspension arrangement to the free shaft end or the motor

eyebolt of the pump set.

▷Refer to the weights given in the general arrangement drawing.

▷Observe the local health and safety regulations.

▷Use suitable, permitted lifting tackle, e.g. self-tightening lifting tongs.

To transport the pump set suspend it from the lifting tackle as shown below.

Fig. 1: Transporting the pump set

3.2 Storage and preservation

If commissioning is to take place some time after delivery, we recommend that the

following measures be taken for pump (set) storage.

CAUTION

Damage during storage by humidity, dirt, or vermin

Corrosion/contamination of the pump (set)!

▷For outdoor storage cover the packed or unpacked pump (set) and accessories

with waterproof material.

CAUTION

Wet, contaminated or damaged openings and connections

Leakage or damage to the pump set!

▷Only remove caps/covers from the openings of the pump set at the time of

installation.

Store the pump (set) in a dry, protected room where the atmospheric humidity is as

constant as possible.

Rotate the shaft by hand once a month, e.g. via the motor fan.

If properly stored indoors, the pump set is protected for a maximum of 12 months.

For storing a pump (set) which has already been operated, observe the instructions

given in this manual. (⇨ Section 6.2.1 Page 21)

3 Transport/Temporary Storage/Disposal

10 of 36 Trialine / Trialine Z

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere KSB Wasserpumpe Handbücher

KSB

KSB HPK-L Montageanleitung

KSB

KSB Etanorm FXV Montageanleitung

KSB

KSB INVCP Bedienungsanleitung

KSB

KSB Etanorm Montageanleitung

KSB

KSB Etabloc Bedienungsanleitung

KSB

KSB Ama-Drainer-Box Mini Montageanleitung

KSB

KSB Etaline-R Montageanleitung

KSB

KSB moviBOOST VPt Bedienungsanleitung

KSB

KSB Amarex N Bedienungsanleitung

KSB

KSB UPA Montageanleitung

KSB

KSB Multi Eco Montageanleitung

KSB

KSB Evamatic-Box N Series Montageanleitung

KSB

KSB Emporia MB Montageanleitung

KSB

KSB Amarex Montageanleitung

KSB

KSB AmaPorter SB 545 SE Montageanleitung

KSB

KSB MK Montageanleitung

KSB

KSB INVCP Betriebsanleitung

KSB

KSB Ama-Drainer 4 Series Montageanleitung

KSB

KSB Ama-Drainer-Box Montageanleitung

KSB

KSB S 100D Installations- und Betriebshandbuch

KSB

KSB Secochem-Ex Bedienungsanleitung

KSB

KSB Movitec Series Montageanleitung

KSB

KSB UPAchrom CC Montageanleitung

KSB

KSB Etaline Montageanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung