KUHN T10 Bedienungsanleitung

AC0001GB C

Complementary instructions

Simple weighing system T10

Bedding and feeding

AC0001GB C

- English - 04-2010

Dear Owner

Simple weighing system T10

Bedding and feeding

$Dear Owner

In buying a Kuhn machine you have chosen wisely. Into it have gone years of thought, research and

improvement. You will find, as have thousands of owners all over the world, that you have the best that

engineering skill and actual field testing can produce. You have purchased a dependable machine, but only

through proper care and operation can you expect to receive the performance and long service built into it.

This manual contains all the necessary information for you to receive full efficiency from your machine. The

performance you get from this machine is largely dependent on how well you read and understand this manual

and apply this knowledge. Please DO NOT ASSUME YOU KNOW HOW TO OPERATE AND MAINTAIN YOUR

MACHINE before reading this manual carefully. KEEP THIS MANUAL AVAILABLE FOR REFERENCE. Pass

it on to the next owner if you re-sell the machine.

Your KUHN dealer can offer a complete line of genuine KUHN service parts. These parts are manufactured and

carefully inspected in the same factory that builds the machine to assure high quality and accurate fitting of any

necessary replacements.

About improvements

We are continually striving to improve our products. It therefore reserves the right to make improvements or

changes when it becomes practical to do so, without incurring any obligations to make changes or additions to

the equipment sold previously.

Simple weighing system T10

Bedding and feeding

Contents

$Contents

Dear Owner.....................................................................................................................1

Contents..........................................................................................................................2

Identification of the machine.........................................................................................4

View of the terminal T10 ..................................................................................................................4

View of the module M10...................................................................................................................4

Manufacturers' marking...................................................................................................................5

Optional equipment..........................................................................................................................5

Safety...............................................................................................................................6

Description of symbols used in this document.............................................................................6

Safety instructions...........................................................................................................................7

Weighing system characteristics ...............................................................................10

Description and glossary...............................................................................................................10

Technical specifications................................................................................................................11

Description of the controls............................................................................................................12

Electrical connection .....................................................................................................................13

Operating conditions...................................................................................................16

All machines ...................................................................................................................................16

Machine with chassis.....................................................................................................................16

Machines without chassis.............................................................................................................17

Contents

Simple weighing system T10

Bedding and feeding

Functioning .................................................................................................................. 18

Power on.........................................................................................................................................18

Resetting to zero............................................................................................................................19

Net/Gross weighing mode.............................................................................................................19

Setting the weighing unit display speed......................................................................................20

Resolution.......................................................................................................................................21

Error messages..............................................................................................................................21

Optional equipment.....................................................................................................22

Remote display...............................................................................................................................22

Battery.............................................................................................................................................22

Maintenance and storage............................................................................................ 23

Limited warranty.......................................................................................................... 24

Simple weighing system T10

Bedding and feeding

Weighing system identification

$Weighing system identification

1. View of the terminal T10

2. View of the module M10

Weighing system identification

Simple weighing system T10

Bedding and feeding

3. Manufacturers' marking

Please write below the type and serial number of the

machine. This information is to be indicated to the dealer

for all spare parts orders.

Type:

Serial no.:

KUHN reference:

4. Optional equipment

Tick box corresponding to the equipment fitted on your

machine:

The marking is on the card under the KUHN logo

(1) visible from the outside.

Remote display

Battery

Simple weighing system T10

Bedding and feeding

Safety

$Safety

1. Description of symbols used in this

document

This symbol indicates a potentially hazardous situation

that if not avoided, could result in serious bodily injury.

This symbol is used to identify special instructions or

procedures which, if not followed strictly, could result in

machinery damage.

This symbol is used to communicate technical

information of particular interest.

Safety

Simple weighing system T10

Bedding and feeding

2. Safety instructions

Read and follow the safety instructions

Before using the machine, carefully read all the safety

instructions in this manual and the warnings placed on

the machine.

Before starting work, the operator must be familiar with

all machine controls, handling devices and their

functions. It is too late to learn once work has been

started!

Never let anyone operate the machine who is not trained

to do so.

Should you have any difficulties in understanding certain

parts in this manual, please contact your KUHN dealer.

Precautions to be taken before carrying out

any operations on the machine

Before leaving the tractor or before adjusting,

maintaining or repairing the machine, disengage the

PTO drive, turn off the engine, remove ignition key and

wait until all moving parts have come to a complete stop

and apply park brake.

Introduction

The machine must only be operated, maintained and repaired by competent persons who are familiar with

machines' specifications and operation and aware of safety regulations for preventing accidents.

The operator must imperatively respect safety instructions in this manual and in the warnings posted on the

machine. The operatoris also obliged to respect current legislation concerning accident prevention, work safety

and public traffic circulation.

Designated use of the machine also means following operation, maintenance and repair recommendations

given by the manufacturer, and using only genuine spare parts, equipment and accessories, as recommended

by the manufacturer.

The manufacturer is not held liable for any damage resulting from machine applications other than those

specified by the manufacturer. Any use other than the designated operation is at the risk and responsibility of

the operator.

The manufacturer is not held liable for any damage or accident resulting from machine modifications carried out

by the operator himself or by a third party without previous written agreement from the manufacturer.

Simple weighing system T10

Bedding and feeding

Safety

Waste disposal

Respect the environment! Never spill pollutants (oil,

grease, filters, etc.) on the ground, never pour them

down the drain and never discard them in any other

place where they could pollute the environment. Never

throw away or burn a tyre. Always take waste to

specialized recycling or waste disposal centers.

Precautions for maintenance and repair

work

Before leaving the tractor or before adjusting,

maintaining or repairing the machine, disengage the

PTO drive, turn off the engine, remove ignition key and

wait until all moving parts have come to a complete stop

and apply park brake.

Rest the machine on the ground, release the pressure

from the hydraulic circuit and leave the machine to cool

down.

Make sure that the parts of the machine that need to be

lifted for maintenance or repair work are firmly propped

up.

Before any work is done on the electric circuit or before

any electric welding is carried out on the attached

machine, disconnect the machine from the tractor

electrical circuit. Also disconnect alternator and battery

terminals.

Repairs on elements under pressure or tension (springs,

pressure accumulators, etc.) must only be carried out by

competent persons with regulation equipment.

Wear the appropriate protective clothing for the work in

hand (gloves, shoes, goggles, helmet, ear defenders,

etc.).

Do not solder, weld or use a blow torch near fluids under

pressure or inflammable products.

For your own safety and for correct machine operation,

only use original manufacturer parts.

Inhaltsverzeichnis

Andere KUHN Zubehör Handbücher

KUHN

KUHN IND 900 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung