KUHN GMD602 GII Bedienungsanleitung

OPERATOR'S MANUAL

Disc mower

GMD602 GII

KN011FGB F

- English - 01-2007

Dear Owner

Disc mower

GMD602 GII

$DEAR OWNER

In buying a Kuhn machine you have chosen wisely. Into it have gone years of thought, research and

improvements. You will find, as have thousands of owners all over the world, that you have the best that

engineering skill and actual field testing can produce. You have purchased a dependable machine, but only by

proper care and operation can you expect to receive the performance and long service built into it.

This manual contains all the necessary information for you to receive full efficiency from your machine. The

performance you get from this machine is largely dependent on how well you read and understand this manual

and apply this knowledge. Please DO NOT ASSUME YOU KNOW HOW TO OPERATE AND MAINTAIN YOUR

MACHINE before reading this manual carefully. KEEP THIS MANUAL AVAILABLE FOR REFERENCE. Pass

it on to the next owner if you re-sell the machine.

Your KUHN dealer can offer a complete line of genuine KUHN service parts. These parts are manufactured and

carefully inspected in the same factory that builds the machine to assure high quality and accurate fitting of any

necessary replacements.

About improvements

We are continually striving to improve our products. It therefore reserves the right to make improvements or

changes when it becomes practical to do so, without incurring any obligations to make changes or additions to

the equipment sold previously.

Designated use of the machine

The GMD602 GII disc mower must only be used for the purpose for which it was manufactured: mowing on the

ground of hay fields, grass silage fields and improved pastures for the purpose of harvesting fodder for feeding

livestock.

Disc mower

GMD602 GII

Contents

$CONTENTS

Dear Owner..................................................................................................................... 1

Contents ......................................................................................................................... 2

Identification of the machine ........................................................................................ 4

Front view ......................................................................................................................................... 4

Rear view .......................................................................................................................................... 4

Model identification plate................................................................................................................ 5

Optional equipment ......................................................................................................................... 5

Safety .............................................................................................................................. 6

Description of symbols used in this document ............................................................................ 6

Safety instructions........................................................................................................................... 7

Location and description of safety decals on the machine....................................................... 15

Road safety equipment and recommendations .......................................................................... 18

Machine specifications................................................................................................ 19

Description and glossary .............................................................................................................. 19

Technical specifications................................................................................................................ 20

Sound levels................................................................................................................................... 20

Putting into service...................................................................................................... 21

Description of control elements ................................................................................................... 21

Coupling and uncoupling.............................................................................................................. 21

Instructions for transport............................................................................................ 32

Putting the machine into transport position ............................................................................... 32

Conformity with the road regulations .......................................................................................... 33

Contents

Disc mower

GMD602 GII

Instructions for work....................................................................................................34

Putting the machine into work position ...................................................................................... 34

Adjustments in working position .................................................................................................35

Machine use ................................................................................................................................... 39

Optional equipment......................................................................................................40

Raised skid shoes ......................................................................................................................... 40

Side deflector kit............................................................................................................................ 40

Large cone discs ........................................................................................................................... 40

Maintenance and storage ............................................................................................41

Frequency chart............................................................................................................................. 41

Lubrication ..................................................................................................................................... 42

Maintenance................................................................................................................................... 47

Storage ........................................................................................................................................... 54

Trouble shooting guide................................................................................................55

Limited warranty...........................................................................................................57

Disc mower

GMD602 GII

Identification of the machine

$IDENTIFICATION OF THE MACHINE

1. Front view

2. Rear view

Identification of the machine

Disc mower

GMD602 GII

3. Model identification plate

Please write below the type and serial number of the

machine. This information is to be indicated to the dealer

for all spare parts orders.

Type: GMD602 GII

No:

4. Optional equipment

Tick box corresponding to the equipment fitted on your

machine:

TYPE

MASSE kg

KUHN S.A.

67700 SAVERNE - FRANCE

N°

MADE IN FRANCE

TYPE

MASSE kg

KUHN S.A.

67700 SAVERNE - FRANCE

N°

MADE IN FRANCE

Kit no. 1076440: Raised skid shoes 120 mm (4.7’’).

Kit no. 1036300: Side deflector kit.

Kit no. 1046170: high cone disc kit.

Kit no. 1036320: Large cone discs.

Disc mower

GMD602 GII

Safety

$SAFETY

1. Description of symbols used in this

document

This symbol indicates a potentially hazardous situation

that if not avoided, could result in serious bodily injury.

This symbol is used to identify special instructions or

procedures which, if not followed strictly, could result in

machinery damage.

This symbol is used to communicate technical

information of particular interest.

Safety

Disc mower

GMD602 GII

2. Safety instructions

Read and follow the safety instructions

Before using the machine, carefully read all the safety

instructions in this manual and the warnings placed on

the machine.

Before starting work, the operator must be familiar with

all machine controls, handling devices and their

functions. It is too late to learn once work has been

started!

Never let anyone operate the machine who is not trained

to do so.

Should you have any difficulties in understanding certain

parts in this manual, please contact your KUHN dealer.

Precautions to be taken before carrying out

any operations on the machine

Before leaving the tractor or before adjusting,

maintaining or repairing the machine, disengage the

PTO drive, turn off the engine, remove ignition key and

wait until all moving parts have come to a complete stop

and apply park brake.

Introduction

The machine must only be operated, maintained and repaired by competent persons who are familiar with

machine specifications and operation and aware of safety regulations for preventing accidents.

The operator must imperatively respect safety instructions in this manual and in the warnings posted on the

machine. The operator is also obliged to respect current legislation concerning accident prevention, work safety

and public traffic circulation.

Designated use of the machine also means following operation, maintenance and repair recommendations

given by the manufacturer, and using only genuine spare parts, equipment and accessories, as recommended

by the manufacturer.

The manufacturer is not held liable for any damage resulting from machine applications other than those

specified by the manufacturer. Any use other than the designated operation is at the risk and responsibility of

the operator.

The manufacturer is not held liable for any damage or accidents resulting from machine modifications carried

out by the operator himself or by a third party without previous written agreement from the manufacturer.

Disc mower

GMD602 GII

Safety

Precautions to take before using the

machine

Do not wear loose clothing which could become caught

up in moving parts.

Wear the appropriate protective clothing for the work in

hand (gloves, shoes, goggles, helmet, ear-protectors,

etc.).

Make sure that all operating controls (ropes, cables,

rods, etc) are placed so that they cannot be set off

accidentally, risking accident or damage.

Before operating the machine, check tightness of nuts

and bolts, particularly on fixing elements (tines, forks,

blades, knives, etc). Retighten if necessary.

Before operating the machine, ensure that all the safety

guards are firmly in place and in good condition.

Immediately replace any worn or damaged guard.

Precautions when driving

Precision steering, tractor adherence, road holding and

efficient braking are influenced by the type of implement,

weight, ballast of front axle, ground or road conditions. It

is therefore of the utmost importance to be cautious in

every given situation.

Groundspeed must be adapted to ground conditions as

well as to roads and paths. Always avoid abrupt changes

of direction.

Be particularly cautious when turning corners, paying

attention to machine overhang, length, height and

weight.

Never use a narrow track tractor on very uneven or

steeply sloping ground.

Never leave the tractor seat while the machine is

operating.

Carrying people or animals on the machine when

working or in transport is strictly forbidden.

Inhaltsverzeichnis

Andere KUHN Landwirtschaftliche Geräte Handbücher

KUHN

KUHN FC243 Bedienungsanleitung

KUHN

KUHN FC2860TLD Bedienungsanleitung

KUHN

KUHN GMD3510-FF Bedienungsanleitung

KUHN

KUHN FC2860 TLR Bedienungsanleitung

KUHN

KUHN HRB353D Bedienungsanleitung

KUHN

KUHN AXERA-M Bedienungsanleitung

KUHN

KUHN KMS208 Bedienungsanleitung

KUHN

KUHN GMD16 Bedienungsanleitung

KUHN

KUHN HR303M Bedienungsanleitung

KUHN

KUHN GA300G Bedienungsanleitung

KUHN

KUHN GF10802T Bedienungsanleitung

KUHN

KUHN GA 7301 Bedienungsanleitung

KUHN

KUHN GF422 Bedienungsanleitung

KUHN

KUHN GF 5001 MH Bedienungsanleitung

KUHN

KUHN GMD240 Bedienungsanleitung

KUHN

KUHN ATHENOR 6070 Bedienungsanleitung

KUHN

KUHN MERGE MAXX 950 Bedienungsanleitung

KUHN

KUHN HR3004D Bedienungsanleitung

KUHN

KUHN FC3160TCD Bedienungsanleitung

KUHN

KUHN HAYBOB 300 Bedienungsanleitung

KUHN

KUHN HRB 122 Bedienungsanleitung

KUHN

KUHN KNM Bedienungsanleitung

KUHN

KUHN GA7822 Bedienungsanleitung

KUHN

KUHN GF 5001 MHA Bedienungsanleitung

Beliebte Landwirtschaftliche Geräte Handbücher anderer Marken

GSi

GSi PNEG-2314 Bedienungsanleitung

Checchi & Magli

Checchi & Magli TEXDRIVE Bedienungsanleitung

Amazone

Amazone Cenius 4003-2TX Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Bedienungsanleitung

Cima

Cima BLITZ Bedienungs- und Wartungsanleitung

Amazone

Amazone CombiDisc 3000 Montageanleitung

HE-VA

HE-VA Disc-Roller XL Contour Bedienungsanleitung

AGT

AGT AGT-SSFM Bedienungsanleitung

Milestone

Milestone 72-84 Bedienungsanleitung

Krone

Krone X-Disc 6200 Bedienungsanleitung

Eliet

Eliet DZC450 Bedienungsanleitung

Taarup

Taarup BIO+ B4000 Bedienungsanleitung

Garland

Garland SHAKER 310 DPG Bedienungsanleitung

stable comfort

stable comfort StableWall System Bedienungsanleitung

Raven

Raven AccuBoom Bedienungsanleitung

International

International 710 Bedienungsanleitung

Ashland

Ashland HDW-3217-14 Bedienungsanleitung

TURF TANK

TURF TANK One+ Bedienungsanleitung