KUHN HRB 122 Bedienungsanleitung

KN135GGB F

OPERATOR'S MANUAL

Power harrows

HRB 122-152-182

KN135GGB F

- English - 11-2009

Dear Owner

Power harrows

HRB 122-152-182

$Dear Owner

In buying a Kuhn machine you have chosen wisely. Into it have gone years of thought, research and

improvement. You will find, as have thousands of owners all over the world, that you have the best that

engineering skill and actual field testing can produce. You have purchased a dependable machine, but only

through proper care and operation can you expect to receive the performance and long service built into it.

This manual contains all the necessary information for you to receive full efficiency from your machine. The

performance you get from this machine is largely dependent on how well you read and understand this manual

and apply this knowledge. Please DO NOT ASSUME YOU KNOW HOW TO OPERATE AND MAINTAIN YOUR

MACHINE before reading this manual carefully. KEEP THIS MANUAL AVAILABLE FOR REFERENCE. Pass

it on to the next owner if you re-sell the machine.

Your KUHN dealer can offer a complete line of genuine KUHN service parts. These parts are manufactured and

carefully inspected in the same factory that builds the machine to assure high quality and accurate fitting of any

necessary replacements.

About improvements

We are continually striving to improve our products. It therefore reserves the right to make improvements or

changes when it becomes practical to do so, without incurring any obligations to make changes or additions to

the equipment sold previously.

Designated use of the machine

HRB122-152-182 power harrows must only be used for the work for which they have been designed:

- Market gardening.

- Maintenance of green spaces.

- Seedbed preparation on ploughed or unploughed ground.

- Use by nurserymen, landscape gardeners and horticulture.

- Vineyard work.

Power harrows

HRB 122-152-182

Contents

$Contents

Dear Owner.....................................................................................................................1

Contents..........................................................................................................................2

Identification of the machine.........................................................................................4

Front view..........................................................................................................................................4

Rear view...........................................................................................................................................4

Model identification plate ................................................................................................................5

Optional equipment..........................................................................................................................5

Safety...............................................................................................................................6

Description of symbols used in this document.............................................................................6

Safety instructions...........................................................................................................................7

Location and description of safety decals on the machine .......................................................14

Road safety equipment and recommendations...........................................................................16

Machine specifications................................................................................................17

Description and glossary...............................................................................................................17

Technical specifications................................................................................................................18

Compulsory equipment .................................................................................................................19

Sound levels ...................................................................................................................................20

Putting into service......................................................................................................21

Coupling and uncoupling..............................................................................................................21

Instructions for transport............................................................................................34

Putting the machine into transport position................................................................................34

Conformity with the road regulations...........................................................................................34

Contents

Power harrows

HRB 122-152-182

Instructions for work................................................................................................... 35

Putting the machine into work position.......................................................................................35

Adjustments in working position..................................................................................................36

Machine use....................................................................................................................................38

Optional equipment.....................................................................................................40

Lighting and signalling..................................................................................................................40

Maintenance and storage............................................................................................ 41

Cleaning the machine....................................................................................................................42

Lubrication......................................................................................................................................42

Maintenance....................................................................................................................................45

Storage............................................................................................................................................48

Trouble shooting guide............................................................................................... 49

Limited warranty.......................................................................................................... 50

Power harrows

HRB 122-152-182

Identification of the machine

$Identification of the machine

1. Front view

2. Rear view

Identification of the machine

Power harrows

HRB 122-152-182

3. Model identification plate

Please write below the type and serial number of the

machine. This information is to be indicated to the dealer

for all spare parts orders.

Type: HRB 122-152-182

Serial no.:

4. Optional equipment

Tick box corresponding to the equipment fitted on your

machine:

Kit no. 1029000: Lighting and signalling: Device with a single signalling panel.

Kit no. 1238170: Lighting and signalling: Device with 2 signalling panels.

Power harrows

HRB 122-152-182

Safety

$Safety

1. Description of symbols used in this

document

This symbol indicates a potentially hazardous situation

that if not avoided, could result in serious bodily injury.

This symbol is used to identify special instructions or

procedures which, if not followed strictly, could result in

machinery damage.

This symbol is used to communicate technical

information of particular interest.

Safety

Power harrows

HRB 122-152-182

2. Safety instructions

Read and follow the safety instructions

Before using the machine, carefully read all the safety

instructions in this manual and the warnings placed on

the machine.

Before starting work, the operator must be familiar with

all machine controls, handling devices and their

functions. It is too late to learn once work has been

started!

Never let anyone operate the machine who is not trained

to do so.

Should you have any difficulties in understanding certain

parts in this manual, please contact your KUHN dealer.

Precautions to be taken before carrying out

any operations on the machine

Before leaving the tractor or before adjusting,

maintaining or repairing the machine, disengage the

PTO drive, turn off the engine, remove ignition key and

wait until all moving parts have come to a complete stop

and apply park brake.

Introduction

The machine must only be operated, maintained and repaired by competent persons who are familiar with

machines' specifications and operation and aware of safety regulations for preventing accidents.

The operator must imperatively respect safety instructions in this manual and in the warnings posted on the

machine. The operatoris also obliged to respect current legislation concerning accident prevention, work safety

and public traffic circulation.

Designated use of the machine also means following operation, maintenance and repair recommendations

given by the manufacturer, and using only genuine spare parts, equipment and accessories, as recommended

by the manufacturer.

The manufacturer is not held liable for any damage resulting from machine applications other than those

specified by the manufacturer. Any use other than the designated operation is at the risk and responsibility of

the operator.

The manufacturer is not held liable for any damage or accident resulting from machine modifications carried out

by the operator himself or by a third party without previous written agreement from the manufacturer.

Power harrows

HRB 122-152-182

Safety

Precautions to take before using the

machine

Do not wear loose clothing which could become caught

up in moving parts.

Wear the appropriate protective clothing for the work in

hand (gloves, shoes, goggles, helmet, ear defenders,

etc.).

Ensure that all operating controls (ropes, cables, rods,

etc) are placed so as they cannot be operated

unintentionally and cause damage or injury.

Before operating the machine, check tightness of nuts

and bolts, particularly on fixing elements (tines, forks,

blades, knives, etc). Retighten if necessary.

Before operating the machine, ensure that all the safety

guards are firmly in place and in good condition.

Immediately replace any worn or damaged guard.

Precautions when driving

Tractor handling, stability, performance and braking

efficiency are all affected by weight distribution, trailedor

mounted implements, additional ballast and driving

conditions. It is therefore of great importance that the

operator exercises caution in every given situation.

Groundspeed must be adapted to ground conditions as

well as to roads and paths. Always avoid abrupt changes

of direction.

Be particularly cautious when turning corners, paying

attention to machine overhang, length, height and

weight.

Never use a narrow track tractor on very uneven or

steeply sloping ground.

Never leave the tractor seat while the machine is

operating.

Carrying people or animals on the machine when

working or in transport is strictly forbidden.

Andere Handbücher für HRB 122

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere KUHN Landwirtschaftliche Geräte Handbücher

KUHN

KUHN SR300 Bedienungsanleitung

KUHN

KUHN GA6501 Bedienungsanleitung

KUHN

KUHN GA7822 Bedienungsanleitung

KUHN

KUHN Hector 3000 Bedienungsanleitung

KUHN

KUHN GMD3510-FF Bedienungsanleitung

KUHN

KUHN Venta 3030 Bedienungsanleitung

KUHN

KUHN HR4004D Bedienungsanleitung

KUHN

KUHN EL82 Bedienungsanleitung

KUHN

KUHN GMD44 Bedienungsanleitung

KUHN

KUHN ALTOR 7560 Bedienungsanleitung

KUHN

KUHN GMD33 N Bedienungsanleitung

KUHN

KUHN PRIMOR Bedienungsanleitung

KUHN

KUHN GA8121 Bedienungsanleitung

KUHN

KUHN MERGE MAXX 950 Bedienungsanleitung

KUHN

KUHN GA 6000 Bedienungsanleitung

KUHN

KUHN PZ 320C Bedienungsanleitung

KUHN

KUHN FC2860 TLR Bedienungsanleitung

KUHN

KUHN GA 9321 H/P Bedienungsanleitung

KUHN

KUHN GF17002 Bedienungsanleitung

KUHN

KUHN GMD602 GII Bedienungsanleitung

KUHN

KUHN MOUNTED MINOTOR 3050 Bedienungsanleitung

KUHN

KUHN HAYBOB 300 Bedienungsanleitung

KUHN

KUHN GMD33 N Bedienungsanleitung

KUHN

KUHN FC3160TCD Bedienungsanleitung

Beliebte Landwirtschaftliche Geräte Handbücher anderer Marken

GSi

GSi PNEG-2314 Bedienungsanleitung

Checchi & Magli

Checchi & Magli TEXDRIVE Bedienungsanleitung

Amazone

Amazone Cenius 4003-2TX Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Bedienungsanleitung

Cima

Cima BLITZ Bedienungs- und Wartungsanleitung

Amazone

Amazone CombiDisc 3000 Montageanleitung

HE-VA

HE-VA Disc-Roller XL Contour Bedienungsanleitung

AGT

AGT AGT-SSFM Bedienungsanleitung

Milestone

Milestone 72-84 Bedienungsanleitung

Krone

Krone X-Disc 6200 Bedienungsanleitung

Eliet

Eliet DZC450 Bedienungsanleitung

Taarup

Taarup BIO+ B4000 Bedienungsanleitung

Garland

Garland SHAKER 310 DPG Bedienungsanleitung

stable comfort

stable comfort StableWall System Bedienungsanleitung

Raven

Raven AccuBoom Bedienungsanleitung

International

International 710 Bedienungsanleitung

Ashland

Ashland HDW-3217-14 Bedienungsanleitung

TURF TANK

TURF TANK One+ Bedienungsanleitung