Kwikset Powerbolt 2 Installationshandbuch

START

First, we need to confirm your lock is “ready” to

be programmed.

To be sure, let’s reset your lock.

1. Make sure the lock is in the unlocked position.

2. Remove the battery cover.

3. Press and hold the “Reset” button for 5 seconds. You will hear 3 long beeps after

the 5 seconds is completed indicating the lock has been reset.

A User Code is used to unlock the door while a Mastercode is a password for making changes to

the lock features.

Step 1:

Reset your lock to original settings

Interior of door

You will reset your User Code to 1-2-3-4

and Mastercode to 0-0-0-0 when the reset is

complete.

TIP

Powerbolt 2| Touchpad Keyless Entry

Programming Instructions

Programming Instructions Powerbolt 2 Touchpad Keyless Entry

Step 2:

Set locking and unlocking direction

1. Make sure the door is open and in the unlocked position.

2. Press 0 –0 –0 –0 – – 00 –

Note: Each button represents two numbers (i.e. ONLY push the button once for 0). If

you incorrectly enter the code, wait 10 seconds until you hear three beeps. Then you

can try again.

You may or may not see your keypad light up

orange during this step. Either way, complete the

step.

TIP

3. If the step was completed correctly, the latch bolt will extend out and retract back in

completely.

The lock will also beep twice and the keypad will

flash Green when the step is successful.

TIP

Step 2:

Set locking and unlocking direction

Programming Instructions Powerbolt 2 Touchpad Keyless Entry

1. Make sure the door is open and in the unlocked position.

2. Press 0

3. The latch will extend fully to the lock position and end with one beep and the keypad

will turn off.

4. Enter 1 –2 –3 –4 –

5. The latch will retract fully in the unlock position and end with one beep and the

keypad will turn off.

1. Make sure the door is open and in the unlocked position.

2. Enter the default Master Code 0 –0 –0 –0 – – 5 –

3. The lock will beep twice and the keypad will flash Green.

Step 3:

Test the Lock

Step 4:

Delete all User Codes

Programming Instructions Powerbolt 2 Touchpad Keyless Entry

1. Make sure the door is open and in the unlocked position.

2. Enter the default Master Code 0 –0 –0 –0 – – 7 –

3. Enter a 4 to 10 digit code and press

4. The lock will beep twice and the keypad will flash Green

If you need further assistance, please call us back at 1-800-327-LOCK (5625).

1. Make sure the door is open and in the unlocked position.

2. Enter the default Master Code 0 –0 –0 –0 – – 1 –

3. Enter a 4 to 10 digit code and press

4. The lock will beep twice and the keypad will flash Green.

Step 6:

Change the Default Mastercode

Step 5:

Program User Codes

Andere Handbücher für Powerbolt 2

Inhaltsverzeichnis

Andere Kwikset Türschloss Handbücher

Kwikset

Kwikset Powerbolt 2 Bedienungsanleitung

Kwikset

Kwikset 69925-001 Bedienungsanleitung

Kwikset

Kwikset 62873/01 Bedienungsanleitung

Kwikset

Kwikset 62822 / 01 Bedienungsanleitung

Kwikset

Kwikset 907 15 SMT Bedienungsanleitung

Kwikset

Kwikset 44594/01 Bedienungsanleitung

Kwikset

Kwikset Burbank Bedienungsanleitung

Kwikset

Kwikset Smartcode 914 Bedienungsanleitung

Kwikset

Kwikset Kevo Bedienungsanleitung

Kwikset

Kwikset Signature Series Austin 720AUL 11P CP Bedienungsanleitung

Kwikset

Kwikset SmartCode 9270CNT-514S Bedienungsanleitung

Kwikset

Kwikset 506KNL 3 Bedienungsanleitung

Kwikset

Kwikset Kevo Bedienungsanleitung

Kwikset

Kwikset SmartCode 909 Bedienungsanleitung

Kwikset

Kwikset Vancouver Handleset Bedienungsanleitung

Kwikset

Kwikset 599 P&T Bedienungsanleitung

Kwikset

Kwikset Prismo 740PSK RDT 15 SMT Bedienungsanleitung

Kwikset

Kwikset OBSIDIAN Bedienungsanleitung

Kwikset

Kwikset Signatures Lisbon 157LSL SQT 26 Bedienungsanleitung

Kwikset

Kwikset 699 FN Bedienungsanleitung

Kwikset

Kwikset 910CNT ZB 11P SMT Bedienungsanleitung

Kwikset

Kwikset 665 Bedienungsanleitung

Kwikset

Kwikset Signature Series Bedienungsanleitung

Kwikset

Kwikset 971MRL SQT 15 Bedienungsanleitung

Beliebte Türschloss Handbücher anderer Marken

Assa Abloy

Assa Abloy effeff 827A-IP Bedienungsanleitung

Iseo

Iseo MA1A Bedienungsanleitung

ID Lock

ID Lock 150 Bedienungsanleitung

Lockly

Lockly ACCESS TOUCH PRO Bedienungsanleitung

iLoq

iLoq G50S Bedienungsanleitung

SDC

SDC Z7835 Bedienungsanleitung

ilco

ilco 452 Bedienungsanleitung

Samsung

Samsung shs-h705 Bedienungsanleitung

TRU-BOLT

TRU-BOLT 08102017 Bedienungsanleitung

CDVI

CDVI 500-LADJ Bedienungsanleitung

Igloohome

Igloohome Deadbolt 2S Metal Grey Montage- und Wartungsanleitung

eSSL

eSSL FL-300 Bedienungsanleitung

Dorma

Dorma MUNDUS PREMIUM GK 50 Benutzerhandbuch

SCOOP

SCOOP Pullbloc 4.1 FS Panik Bedienungsanleitung

Yale

Yale MORTISE 8800 SERIES Bedienungsanleitung

Siegenia

Siegenia KFV AS3500 Bedienungsanleitung

Saflok

Saflok Quantum ädesē RFID Bedienungsanleitung

ArrowVision

ArrowVision Shepherd 210 Bedienungsanleitung