Kyocera FS-C5100DN Bedienungsanleitung

Operation Guide

FS-C5100DN

FS-C5200DN

FS-C5300DN

iii

Contents

1 Machine Parts

Components at the Front of the Printer ................................... 1-2

Components at the Left of the Printer ...................................... 1-2

Internal Components .................................................................. 1-3

Components at the Rear of the Printer ..................................... 1-3

Operation Panel .......................................................................... 1-4

2 Printing Operation

Changing Network Interface Parameters ................................. 2-2

Printing a Network Interface Status Page .............................. 2-10

Installing the Printer Driver ..................................................... 2-11

Printing from Application Software ........................................ 2-17

Status Monitor .......................................................................... 2-18

Uninstalling Software (Windows PC) ...................................... 2-22

3 Maintenance

General Information ................................................................... 3-2

Toner Container Replacement .................................................. 3-2

Replacing the Waste Toner Box ................................................ 3-6

Cleaning the Printer ................................................................... 3-8

4 Troubleshooting

General Guidelines ..................................................................... 4-2

Print Quality Problems ............................................................... 4-3

Error Messages ........................................................................... 4-6

Clearing Paper Jams ................................................................ 4-12

5 Specifications

Legal and Safety Information

Notice on Software

SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE

PRINTER'S EMULATION MODE. The printer is factory-set to emulate the

PCL.

Notice

The information in this guide is subject to change without notification.

Additional pages may be inserted in future editions. The user is asked to

excuse any technical inaccuracies or typographical errors in the present

edition.

No responsibility is assumed if accidents occur while the user is following

the instructions in this guide. No responsibility is assumed for defects in

the printer's firmware (contents of its read-only memory).

This guide, any copyrightable subject matter sold or provided with or in

connection with the sale of the page printer, are protected by copyright.

All rights are reserved. Copying or other reproduction of all or part of this

guide, any copyrightable subject matter without the prior written consent

of Kyocera Mita Corporation is prohibited. Any copies made of all or part

of this guide, any copyrightable subject must contain the same copyright

notice as the material from which the copying is done.

Regarding Tradenames

PRESCRIBE is a registered trademark of Kyocera Corporation. KPDL is

trademark of Kyocera Corporation.

Hewlett-Packard, PCL, and PJL are registered trademarks of Hewlett-

Packard Company. Centronics is a trade name of Centronics Data

Computer Inc. PostScript is a registered trademark of Adobe Systems

Incorporated. Macintosh is a registered trademark of Apple Computer,

Inc. Microsoft, Windows, and Windows NT are registered trademarks of

Microsoft Corporation. PowerPC and Microdrive are trademarks of

International Business Machines Corporation. CompactFlash is a

trademark of SanDisk Corporation. ENERGY STAR is a U.S. registered

mark. All other brand and product names are registered trademarks or

trademarks of their respective companies.

This product was developed using the Tornado™ Real Time Operating

System and Tools from Wind River Systems.

This product contains UFST™ and MicroType®from Monotype Imaging

Inc.

CAUTION NO LIABILITY IS ASSUMED FOR ANY

DAMAGE CAUSED BY IMPROPER INSTALLATION.

License Agreements

Typeface Trademark Acknowledgement

All resident fonts in this printer are licensed from Monotype Imaging Inc.

Helvetica, Palatino and Times are registered trademarks of Linotype-Hell

AG. ITC Avant Garde Gothic, ITC Bookman, ITC ZapfChancery and ITC

Zapf Dingbats are registered trademarks of International Typeface

Corporation.

Monotype Imaging License Agreement

1“Software” shall mean the digitally encoded, machine readable,

scalable outline data as encoded in a special format as well as the

UFST Software.

2You agree to accept a non-exclusive license to use the Software to

reproduce and display weights, styles and versions of letters,

numerals, characters and symbols (“Typefaces”) solely for your own

customary business or personal purposes at the address stated on

the registration card you return to Monotype Imaging. Under the

terms of this License Agreement, you have the right to use the Fonts

on up to three printers. If you need to have access to the fonts on

more than three printers, you need to acquire a multi-user license

agreement which can be obtained from Monotype Imaging.

Monotype Imaging retains all rights, title and interest to the Software

and Typefaces and no rights are granted to you other than a License

to use the Software on the terms expressly set forth in this

Agreement.

3To protect proprietary rights of Monotype Imaging, you agree to

maintain the Software and other proprietary information concerning

the Typefaces in strict confidence and to establish reasonable

procedures regulating access to and use of the Software and

Typefaces.

4You agree not to duplicate or copy the Software or Typefaces,

except that you may make one backup copy. You agree that any

such copy shall contain the same proprietary notices as those

appearing on the original.

5This License shall continue until the last use of the Software and

Typefaces, unless sooner terminated. This License may be

terminated by Monotype Imaging if you fail to comply with the terms

of this License and such failure is not remedied within thirty (30)

days after notice from Monotype Imaging. When this License expires

or is terminated, you shall either return to Monotype Imaging or

destroy all copies of the Software and Typefaces and documentation

as requested.

6You agree that you will not modify, alter, disassemble, decrypt,

reverse engineer or decompile the Software.

7Monotype Imaging warrants that for ninety (90) days after delivery,

the Software will perform in accordance with Monotype Imaging-

published specifications, and the diskette will be free from defects in

material and workmanship. Monotype Imaging does not warrant that

the Software is free from all bugs, errors and omissions.

8THE PARTIES AGREE THAT ALL OTHER WARRANTIES,

EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF

FITNESS FOR A PARTICULAR PURPOSE AND

MERCHANTABILITY, ARE EXCLUDED.

vii

9Your exclusive remedy and the sole liability of Monotype Imaging in

connection with the Software and Typefaces is repair or replacement

of defective parts, upon their return to Monotype Imaging.

10 IN NO EVENT WILL MONOTYPE IMAGING BE LIABLE FOR LOST

PROFITS, LOST DATA, OR ANY OTHER INCIDENTAL OR

CONSEQUENTIAL DAMAGES, OR ANY DAMAGES CAUSED BY

ABUSE OR MISAPPLICATION OF THE SOFTWARE AND

TYPEFACES.

11 Massachusetts U.S.A. law governs this Agreement.

12 You shall not sublicense, sell, lease, or otherwise transfer the

Software and/or Typefaces without the prior written consent of

Monotype Imaging.

13 Use, duplication or disclosure by the Government is subject to

restrictions as set forth in the Rights in Technical Data and Computer

Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or

subparagraph (c)(1)(ii), as appropriate. Further use, duplication or

disclosure is subject to restrictions applicable to restricted rights

software as set forth in FAR 52.227-19 (c)(2).

14 YOU ACKNOWLEDGE THAT YOU HAVE READ THIS

AGREEMENT, UNDERSTAND IT, AND AGREE TO BE BOUND BY

ITS TERMS AND CONDITIONS. NEITHER PARTY SHALL BE

BOUND BY ANY STATEMENT OR REPRESENTATION NOT

CONTAINED IN THIS AGREEMENT. NO CHANGE IN THIS

AGREEMENT IS EFFECTIVE UNLESS WRITTEN AND SIGNED

BY PROPERLY AUTHORIZED REPRESENTATIVES OF EACH

PARTY. BY OPENING THIS DISKETTE PACKAGE, YOU AGREE

TO ACCEPT THE TERMS AND CONDITIONS OF THIS

AGREEMENT.

GPL

Firmware of this machine is using in part the GPL applied codes

(www.fsf.org/copyleft/gpl.html). Please access "http://

www.kyoceramita.com/gpl" for more information on how to make GPL

applied codes available.

Open SSLeay License

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are met:

1Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

2Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

3All advertising materials mentioning features or use of this software

must display the following acknowledgment:

"This product includes software developed by the OpenSSL Project

for use in the OpenSSL Toolkit. (http://www.openssl.org/)"

4The names "OpenSSL Toolkit" and "OpenSSL Project" must not be

used to endorse or promote products derived from this software

without prior written permission.

For written permission, please contact [email protected].

5Products derived from this software may not be called "OpenSSL"

nor may "OpenSSL" appear in their names without prior written

permission of the OpenSSL Project.

viii

6Redistributions of any form whatsoever must retain the following

acknowledgment: "This product includes software developed by the

OpenSSL Project for use in the OpenSSL Toolkit (http://

www.openssl.org/)"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS"

AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT

NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR

ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR

PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN

IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Original SSLeay License

reserved.

This package is an SSL implementation written by Eric Young

([email protected]). The implementation was written so as to conform

with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the

following conditions are aheared to. The following conditions apply to all

code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code;

not just the SSL code. The SSL documentation included with this

distribution is covered by the same copyright terms except that the holder

is Tim Hudson ([email protected]).

code are not to be removed.

If this package is used in a product, Eric Young should be given attribution

as the author of the parts of the library used.

This can be in the form of a textual message at program startup or in

documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are met:

1Redistributions of source code must retain the copyright notice, this

list of conditions and the following disclaimer.

2Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

3All advertising materials mentioning features or use of this software

must display the following acknowledgement:

"This product includes cryptographic software written by Eric Young

(eay@cryptsoft.com)"

The word 'cryptographic' can be left out if the rouines from the library

being used are not cryptographic related :-).

4If you include any Windows specific code (or a derivative thereof)

from the apps directory (application code) you must include an

acknowledgement:

"This product includes software written by Tim Hudson

([email protected])"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN

NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE

FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,

OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED

TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS

OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,

WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE

USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY

OF SUCH DAMAGE.

The licence and distribution terms for any publically available version or

derivative of this code cannot be changed. i.e. this code cannot simply be

copied and put under another distribution licence [including the GNU

Public Licence.]

Compliance and Conformity

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

• The use of a non-shielded interface cable with the referenced device

is prohibited.

CAUTION —The changes or modifications not expressly approved by

the party responsible for compliance could void the user’s authority to

operate the equipment.

This device complies with Part 15 of FCC Rules and RSS-Gen of IC

Rules.

Operation is subject to the following two conditions; (1) this device may

not cause interference, and (2) this device must accept any interference,

including interference that may cause undesired operation of the device.

* The above warning is valid only in the United States of America.

Interface connectors

IMPORTANT Be sure to power off the printer before connecting or

disconnecting an interface cable. For protection against static

electricity discharge to the printer's internal electronics through the

interface connector(s), cover any interface connector that is not in use

with the protective cap supplied.

Note Use shielded interface cables.

Andere Handbücher für FS-C5100DN

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kyocera Drucker Handbücher

Kyocera

Kyocera ECOSYS FS-1370DN Bedienungsanleitung

Kyocera

Kyocera ECOSYS P2040dw Bedienungsanleitung

Kyocera

Kyocera Taskalfa Pro 15000c Bedienungsanleitung

Kyocera

Kyocera FS-1750 Bedienungsanleitung

Kyocera

Kyocera ECOSYS FS-C8650DN Installations- und Betriebshandbuch

Kyocera

Kyocera ECOSYS FS-1350DN Bedienungsanleitung

Kyocera

Kyocera FS-C5015N Bedienungsanleitung

Kyocera

Kyocera PA2000w Bedienungsanleitung

Kyocera

Kyocera DU-61 Bedienungsanleitung

Kyocera

Kyocera ECOSYS PA2100cwx Bedienungsanleitung

Kyocera

Kyocera FS-6020 Bedienungsanleitung

Kyocera

Kyocera ECOSYS P4040dn Bedienungsanleitung

Kyocera

Kyocera FS-2100DN Installations- und Betriebshandbuch

Kyocera

Kyocera FS-3700 Bedienungsanleitung

Kyocera

Kyocera F-1000 Bedienungsanleitung

Kyocera

Kyocera KM-2560 Bedienungsanleitung

Kyocera

Kyocera FS-2000D, FS-3900DN, FS-4000DN, FS-6950DN Bedienungsanleitung

Kyocera

Kyocera KYOCERA FS-C8100DN Bedienungsanleitung

Kyocera

Kyocera ECOSYS P4060DN Bedienungsanleitung

Kyocera

Kyocera EP 470DN Bedienungsanleitung

Kyocera

Kyocera PA2000w Bedienungsanleitung

Kyocera

Kyocera TASKalfa 2020 Bedienungsanleitung

Kyocera

Kyocera FS-1100 Bedienungsanleitung

Kyocera

Kyocera ECOSYS FS-C5350DN Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung