La Crosse Technology TX141TH-BV4 Bedienungsanleitung

WIRELESS

TEMPERATURE / HUMIDITY SENSOR

Model: TX141TH-Bv4

DC: 092021

WARRANTY INFO

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this

product relating to manufacturing defects in materials & workmanship.

For Full Warranty Details, Visit: www.lacrossetechnology.com/support

CARE + MAINTENANCE

•Do not mix old and new batteries.

•Do not mix Alkaline, Lithium, standard, or rechargeable batteries.

•Always purchase the correct size and grade of battery most suitable for intended use.

•Clean the battery contacts and also those of the device prior to battery installation.

•Ensure the batteries have with correct polarity (+ / -).

•Remove batteries from equipment that will not to be used for an extended period.

•Promptly remove expired batteries.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

•Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1 ) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

Caution!

Any changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

processed using electronic, mechanical or chemical process without the written permission

of the publisher.

This booklet may contain errors or misprints. The information it contains is regularly checked and

corrections are included in subsequent editions. We disclaim any responsibility for any technical error

or printing error, or their consequences. All trademarks and patents are recognized.

WARNING: This product can expose you to chemicals including styrene, which is known to

the State of California to cause cancer. For more information go to: www.P65Warnings.ca.gov View online at: bit.ly/tx141th-bv4

Page | 4

Power up

Insert 2-AA batteries into your Outdoor Sensor. Option 1:

• Install one mounting screw into a wall.

• Place the transmitter onto the screw.

Option 2:

• Insert the mounting screw through the front of the sensor and into

the wall.

• Tighten the screw to snug (do not over tighten).

• Mount the temperature sensor on a north-facing wall or in any

well shaded location. Sun will make it read high.

• Under an eave or deck rail is preferred.

• Be sure the outdoor sensor is mounted vertically to drain

moisture.

• The maximum wireless transmission range to the weather station

is over 330 feet (100 meters) in open air, not including walls or

ﬂoors.

Watch sensor mounting video: bit.ly/TH_SensorMounting

Refer to the owner’s manual for your clock or weather station to

see if you can Search for Sensor. If so, enable a search and press

the TX button (transmission) on your sensor.

If there is no Search option, try this:

1. Bring your sensor inside next to the station and remove

batteries from both devices.

2. Press any button at least 20 times, and then wait 15 minutes.

3. After the wait, install fresh batteries into both your sensor and

station. Your outdoor temperature should return within the next

few minutes.

4. Keep your sensor next to the station for another 15 minutes to

establish a strong connection.

5. Once connection is reestablished, place sensor outside in a

shaded location.

Power up as a Replacement Sensor

Position Sensor

Specications

Temperature range: -40°F to 140°F (-40 °C to 60 °C)

Humidity range: 10%-99% RH

Transmission range: Up to 330 feet

Transmission frequency: 433 MHz

Power requirements: 2 “AA” Alkaline batteries (not included)

Dimensions: 1.58” L x 0.83” W x 5.08” H

Page | 2 Page | 3

TX button

(Transmission

LED

Dieses Handbuch passt für folgende Modelle

Andere La Crosse Technology Zubehör Handbücher

La Crosse Technology

La Crosse Technology CA79097 Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX8U Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX15U Bedienungsanleitung

La Crosse Technology

La Crosse Technology LTV-W2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX8U Bedienungsanleitung

La Crosse Technology

La Crosse Technology CYCLONE PRO SENSOR Bedienungsanleitung

La Crosse Technology

La Crosse Technology LTV-WR1 Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX6 Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX12U Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX23U Bedienungsanleitung

La Crosse Technology

La Crosse Technology D012.104.E1 Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX10U Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX7U Bedienungsanleitung

La Crosse Technology

La Crosse Technology LTV-R2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX141TH-BCHv3 Bedienungsanleitung

La Crosse Technology

La Crosse Technology LTV-R3 Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX60U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology 925-1418 Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX-63U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology Alerts TX60U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology LTV-THP1-T1 Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX21U Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX145R Bedienungsanleitung

La Crosse Technology

La Crosse Technology BREEZE PRO SENSOR Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung