La Crosse Technology 512-811-BBB Bedienungsanleitung

Model: 512-811-BBBwww.lacrossetechnology.com/support | 1

Model: 512-811-BBB

Quick Setup Guide

DC: 121615

ATOMIC CLOCK WITH WEATHER FORECAST

Time,

Alarm Time

+ Snooze

Weather

Forecast

Icons +

Outdoor

Temperature

with

Channels

18-hour

Pressure

History

Graph, Date,

Weekday, +

Indoor

Temperature

Battery

Compartment

3-AA Alkaline

Batteries.

Foldout Legs

Battery

Compartment

2-AAA

batteries

W186-D

Outdoor

Sensor

Buttons

Back View

Front

View

Model: 512-811-BBBwww.lacrossetechnology.com/support | 2

Get Started

1. Insert 2 new AAA batteries (not included) into the

W186-D outdoor sensor. Observe the correct polarity. The

red LED will flash during transmission.

2. Insert the 3 new AA Alkaline batteries (not included) into

the clock. Observe the correct polarity.

3. After 5 minutes place sensor outside in a shaded location.

Set Language, Calendar, Time, Weather Forecast Icon

1. Hold the SET button to enter time set mode.

2. Press the + or -buttons to adjust the values.

3. Press the SET button to confirm adjustments and move to

the next item.

Setting order:

1. Language (EN English, GE German, FR French, DU Dutch,)

SP Spanish,) .

2. Year

3. Month

4. Date

5. Hour

6. Minutes

7. 12/24 hour time

8. Weather Forecast Icon

9. Daylight Saving Time Indicator

Note: The day of the week sets automatically, as the year,

month and date are set.

Press the SET button to exit, or wait 60 seconds without

pressing buttons to return to the normal time display.

Time Zone

Press the ZONE button to select one of four time zones:

•ES = Eastern

•CS = Central

•MS = Mountain

•PS = Pacific

Note: The time zone letters will flash in the weekday display.

The hours will change as you change time zones.

Model: 512-811-BBBwww.lacrossetechnology.com/support | 3

Alarm

Icon

Celsius/Fahrenheit

Clock: Hold the °C/°F button to switch from Fahrenheit

to Celsius temperature display.

Outdoor Sensor: Remove the battery cover then press

and release the °C/°F button on the transmitter to

select Fahrenheit or Celsius shown on the transmitter.

Set Time Alarm

1. Hold the AL button to enter alarm set mode.

The letters “AL” will replace the weekday.

2. Press the + or -buttons to adjust the values.

3. Press the AL button to confirm & move to the next item.

Alarm Time setting order: 1. Hours, 2. Minutes

Activate/Deactivate Time Alarm

•Press the AL button once to view alarm time.

•Press the + or -buttons to activate the alarm.

Once activated, the alarm icon appears.

•Press the + or - buttons again to deactivate the

alarm. The alarm icon will disappear.

Snooze (Silences Alarm Temporarily)

•When alarm sounds, press the ZZ button to silence the

alarm for 5 minutes.

•The alarm icon will flash.

•In snooze mode, press the AL button to stop the alarm for

one day.

Note: The alarm is crescendo sound. The alarm sounds for

Two minutes and then shut off completely.

WWVB Time Signal Search

Hold the +button to start or stop a manual signal search. WWVB

Icon will flash

For information about WWVB visit:

www.nist.gov/pml/div688/grp40/wwvb.cfm

Model: 512-811-BBBwww.lacrossetechnology.com/support | 4

Forecast Icons

The forecast icon is programmable in the setup menu above.

The unit predicts weather condition of the next 12 – 24 hours

based on the change of atmospheric pressure. The weather

forecast is about 70-75% correct. As weather conditions

cannot be 100% correctly forecasted we cannot be responsible

for any loss caused by an incorrect forecast.

18-hour Barometric Pressure History Graph

The bar chart indicates the air pressure history trend over the

last 18 hours. The “0” in the middle of this scale is equal to the

current pressure and each change bar represents how high or

low in “hPa“.

When read from left to right, if the bars are rising, it means

that the weather is getting better due to the increase of air

pressure. If the bars go down, it means the air pressure has

dropped and the weather is expected to worsen.

Low Battery Icon

Low battery icon indicates low battery for clock or sensor.

•If the icon is displayed in the Outdoor Temperature

section, replace batteries in the outdoor sensor.

•If the icon is displayed in the Indoor Temperature

section, replace batteries in the atomic clock.

Outdoor Sensor Channels

When more than one transmitter is used, set each transmitter

to a different channel. To view: press the CH button on the

atomic clock to select Ch1, Ch2, Ch3 or auto-channel scrolling

display modes.

Auto-channel will show a circling arrow below the channel

number and the atomic clock will rotate through each channel

approximately every 5-8 seconds

Low

Battery

Icon

Model: 512-811-BBBwww.lacrossetechnology.com/support | 5

Setup with Multiple Sensors

The clock can receive up to 3 outdoor sensors: W186-D.

•Select a separate channel on each outdoor sensor.

•Install batteries in all the sensors.

•Hold the CH button for 5 seconds and the clock will

search for all outdoor sensors.

•Press the TX button once on each sensor to send a

signal.

Search for Outdoor Sensor

•Hold the CH button to search for the outdoor sensor.

•Press the TX button on the sensor to send a signal.

Restart

If there is no outdoor temperature data after 3 minutes,

remove batteries from the clock and the outdoor sensor then

press any button 20 times. After 15 minutes, return to Step 1

above.

Outdoor Sensor Positioning

•Mount the outdoor sensor on a north-facing wall or in any

well shaded area. Under an eave or deck rail is preferred.

•The maximum wireless transmission range to the clock is

over 100 feet (30 meters) in open air, not including walls or

floors.

•Be sure the outdoor sensor is mounted vertically

Care & Maintenance

•Do not mix old and new batteries

•Do not mix Alkaline, Standard, Lithium or Rechargeable

Batteries

•Always purchase the correct size and grade of battery most

suitable for intended use.

•Replace all batteries of a set at the same time.

•Clean the battery contacts and also those of the device prior

to battery installation.

•Ensure the batteries are installed with correct polarity

(+and -).

Model: 512-811-BBBwww.lacrossetechnology.com/support | 6

•Remove batteries from equipment which is not to be used

for an extended period.

•Remove expired batteries promptly.

Specifications

Indoor

Temperature

Range:

+32°F to +122°F (0°C to 50°C)

Outdoor

Temperature

Range:

-4°F to 140°F (-20°C to 60°C)

Distance: Over 100 ft. (30 meters)

RF 434MHz (open air)

Power

Atomic Clock:

3-AA, IEC, LR6 batteries (not included)

W186-D Sensor: 2-AAA, IEC, LR3 batteries (not included)

Battery Life

Atomic Clock: Battery life is over 12 months when using

reputable battery brands

W186-D Sensor: Battery life is over 12 months when using

reputable battery brands

Dimensions

Atomic Clock:11.33” W x 1.14” D x 11.33” H

(28.77 x 2.89 x 28.77 cm)

W186-D Sensor: 2.55” W x 1.27” D x 3.57” H

(6.47 x 3.22 x 9.06 cm)

Model: 512-811-BBBwww.lacrossetechnology.com/support | 7

Warranty and Support Information

La Crosse Technology, Ltd. provides a 1-year limited time

warranty (from date of purchase) on this product relating to

manufacturing defects in materials & workmanship.

View full warranty details online at:

www.lacrossetechnology.com/warranty_info.pdf

For warranty work, technical support or other

information contact:

La Crosse Technology, Ltd

2830 South 26th St.

La Crosse, WI 54601

Protected under U.S. Patents:

5,978,738 | 6,076,044 |RE43903

Contact Support:

608-782-1610

Online Product Support:

www.lacrossetechnology.com/support

Product Registration:

www.lacrossetechnology.com/support/register

Model: 512-811-BBB www.lacrossetechnology.com/support | 8

FCC Statement

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

This device must not be co-located or operating in conjunction with

any other antenna or transmitter.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including

interference that may cause undesired operation.

Caution!

The manufacturer is not responsible for any radio or TV interference

caused by unauthorized modifications to this equipment. Such

modifications could void the user authority to operate the equipment.

even in part, or duplicated or processed using electronic, mechanical

or chemical process without the written permission of the publisher.

This booklet may contain errors or misprints. The information it

contains is regularly checked and corrections are included in

subsequent editions. We disclaim any responsibility for any technical

error or printing error, or their consequences.

All trademarks and patents are recognized.

Model: 512-811-BBB www.lacrossetechnology.com/support |9

Modèle: 512A-811 / 512B-811

Guide d'installation rapide DC:

121615

Horloge atomique à PRÉVISIONS MÉTÉO

Heure,

Heure

d’alarme +

Roupillon

Icônes de

Prévision

Météo +

Temperature

Extérieures

avec Canaux

Graphique

Historique de

18 Heures de

Pression

Barométrique

, Date, Jour

de la

Semaine, +

Temperature

Intérieure

Comparment

aux Piles 3

Piles Alcalines

Jambes

Dépliantes

Comparment

aux Piles

2 Piles AAA

Sonde

Extérieure

W186-D

Touches

Vue d’Arrière

Vue de

devant

Model: 512-811-BBB www.lacrossetechnology.com/support | 10

Commencer

1. Insérer les 2 piles AAA (non incluses) dans la sonde extérieure

2. W186-D. Respecter les bonnes polarités. La LED rouge clignote

pendant la transmission.

3. Insérer les 3 nouvelles piles alcalines AA (non fournies) dans

4. l'horloge. Respecter les polarités.

5. 3. Après 5 minutes, placer la sonde extérieure dans un endroit

ombragé.

Définir la langue, le calendrier, l’heure, Icône de Prévisions Météo

1. Appuyer sur la touche SET pour entrer dans le mode de réglage de

l'heure.

2. Appuyer sur les touches + ou - pour ajuster les valeurs.

3. Appuyer sur le bouton SET pour confirmer les ajustements et passer

au point suivant.

Ordre du réglage de l'heure:

1. Langue (EN Anglais, GE allemand, français FR, néerlandais UA,

SP espagnol,).

2 Année

3 Mois

4. Date

5. Heure

6. Minutes

7. Heure de 12/24

8. Icônes de Previsions Météo

9. Indicateur de l'heure d'été

Remarquer: Le jour de la semaine se règle automatiquement, aussitôt

que l'année, le mois et la date sont réglées.

Appuyer sur la touche SET pour quitter, ou attendre 60 secondes sans

appuyer sur les touches pour revenir à l'affichage de l'heure normale.

Fuseau horaire

Appuyer sur la touche ZONE pour sélectionner l'un des quatre fuseaux

horaires:

•ES = Est

•CS = Central

•MS = Montagne

•PS = Pacifique

Inhaltsverzeichnis

Sprachen:

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1425C Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-141WBV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9032U Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308A-146 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9047UIT-CA Bedienungsanleitung

La Crosse Technology

La Crosse Technology C79790 Abmessungen

La Crosse Technology

La Crosse Technology WS-7391U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7025U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1409B Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1417V2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7016U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9013U Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX233RW Bedienungsanleitung

La Crosse Technology

La Crosse Technology 328-1414 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS6282 Installations- und Betriebshandbuch

La Crosse Technology

La Crosse Technology S81120 Abmessungen

La Crosse Technology

La Crosse Technology WS-7013BZ Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8610 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2813U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1414B Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS6826 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1912 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung