La Crosse Technology T83646 Bedienungsanleitung

Model T83646 www.lacrossetechnology.com/support Page | 1

Model: T83646

Manual

This Wireless Weather Station provides real-time weather straight from your backyard. Monitor indoor and

outdoor temperature with daily min/mix records and humidity, track temperature trends and set your own

high and low temperature alerts--all in one convenient device for your desktop or bedside table. It also

features digital time and date with snooze alarm, moon phase, and has a wireless transmission range of

over 200 ft. to the backyard temp/humidity sensor.

Wireless Weather Station with TX141TH-A Outdoor Transmitter

Get Support: www.lacrossetechnology.com/t83646

Initial Startup

Step 1:

Insert 2 NEW AA batteries (not included) into the weather station. Observe the correct polarity.

Step 2:

Insert 2 NEW AA batteries (not included) into the TX141TH-A transmitter. Observe the correct polarity.

Restart: if there is no outdoor temperature data after 3 minutes. Remove batteries from the weather

station & transmitter for 15 minutes. Return to Step 1 above.

Out Temperature

Humidity + Trends

In. Temperature

Humidity + Trends

Time

Calendar

+ Alarm

Function Buttons

Outdoor

Temp. Alerts

Moon

Phase

TX141TH-A

Model T83646 www.lacrossetechnology.com/support Page | 2

Table of Contents

Wireless Weather Station with TX141TH-A Outdoor Transmitter 1

Initial Setup 1

Restart 1

Table of Contents 2

Features 2

Function Buttons 3

Program Menu 3

Set Calendar 3

12-hour or 24-hour Time Format 3

Set Time 4

Fahrenheit/Celsius 4

Alarm Time 4

Set Alarm 4

Activate/Deactivate Alarm 4

Snooze Alarm 4

Temperature Alerts 5

Select Temperature Alerts 5

Temperature Alerts Arm/Disarm 5

Active Alert 6

Temperature Trend Arrows 6

Min/Max Temperature Data 6

Heat Index/Dew Point 6

Outdoor Temperature/Humidity Flashes 7

Moon Phase 7

Care and Maintenance 7

Low Battery Icon 8

Power the Weather Station 8

Install Batteries in the Outdoor Transmitter 8

Outdoor Transmitter Signal Reception 9

Search for Transmitter 9

Position the Weather Station 9

Position the Outdoor Transmitter 9

Specifications 9

Indoor 9

Outdoor 10

Power Requirements 10

Battery Life 10

Dimensions 10

Warranty and Support Information 10

FCC Statement 10

Features

Outdoor temperature (°F/°C)

Signal strength icon for sensor transmission

Outdoor humidity (%RH)

Outdoor temp. trend indicator

Indoor humidity (%RH)

Indoor temperature (°F/°C)

Indoor temp. trend indicator

12/24 hr. time (manual setting)

Calendar: month/day/date

Track able moon phases

Outdoor/Indoor temp. alerts

Outdoor MIN/MAX temp. (°F/°C)

Model T83646 www.lacrossetechnology.com/support Page | 3

Indoor MIN/MAX temp. (°F/°C)

Low battery icon for station

Low battery icon for sensor

Function Buttons

Program Menu (set time, date, 12/24, ºF/ºC)

The program menu selects your preferences:

Year

Month

Date

12/24-Hour Time Format

Hour

Minutes

Fahrenheit/Celsius

Program menu buttons:

1. Hold the SETTINGS button to enter time set mode.

2. To adjust values press the DOWN or UP ARROW buttons.

3. Press the SETTINGS button to confirm adjustments and move to the next item.

Set Calendar

To set the calendar:

1. Hold the SETTINGS button until the station beeps.

2. The Year will flash.

3. Use the ARROW buttons to choose the year.

4. Press the SETTINGS button to confirm and move to the month.

5. The Month will flash.

6. Use the ARROW buttons to choose the month.

7. Press the SETTINGS button to confirm and move to the date.

8. The Date will flash.

9. Use the ARROW buttons to choose the date.

10. Press the SETTINGS button to confirm and move to select 12/24 hour time.

Note: The day of the week will set automatically once the year, month and date are set.

Buttons

FRONT

VIEW

Sensor

Battery Cover

Sensor Battery

Compartment

2 “AA”

SENSOR

TX-141TH-A

LED

Model T83646 www.lacrossetechnology.com/support Page | 4

12-hour or 24-hour Time Format

The Time may be displayed in 12-hour or 24-hour format. Default is 12-hour time.

Note: When in 12-hour format, AM or PM will show in front of the hour.

1. Hold the SETTINGS button for three seconds to enter time set mode.

2. 12H will flash.

3. Use the ARROW buttons to choose 12-hour or 24-hour time format.

4. Press the SETTINGS button to confirm and move to set time.

Set Time

To set the time manually:

1. The Hour digit will flash.

2. Use the ARROW buttons to choose the hour.

3. Press the SETTINGS button to confirm and move to minutes.

4. The Minutes will flash.

5. Use the ARROW buttons to choose the minutes.

6. Press the SETTINGS button to confirm and move to select Fahrenheit/Celsius.

Fahrenheit/Celsius

1. °F or °C will flash.

2. Use the ARROW buttons to select Fahrenheit or Celsius.

3. Press and release the SETTINGS button to confirm and exit

the program menu.

Note: When no buttons are pressed for ten seconds, the

weather station will save the last change and default back to normal mode.

Alarm Time

Time alarm buttons:

1. Hold the TIME ALARM button to enter alarm set mode.

2. To adjust values press the DOWN or UP ARROW buttons.

3. Press the TIME ALARM button to confirm adjustments and move to the next item.

Set Time Alarm

In normal mode, press and release the TIME ALARM button once to show alarm time. Hold the TIME

ALARM button for three seconds to enter alarm set mode.

1. The Hour will flash.

2. Use the ARROW buttons to set the hour.

3. Press the TIME ALARM button to confirm and switch to minutes.

4. The Minutes will flash.

5. Use the ARROW buttons to set the minutes.

6. Press TIME ALARM button to confirm and exit.

Note: When no buttons are pressed for 20 seconds the weather station will save the last change and

default back to normal time mode.

Activate/Deactivate Time Alarm

In normal mode, press and release the TIME ALARM button once to show alarm time.

Press and release the TIME ALARM button repeatedly to turn ON/OFF alarm.

The alarm icon appears when alarm is activated.

Note: The crescendo alarm will ring for 2 minutes then turn off if no buttons are pressed.

Snooze

When the alarm sounds, press the TIME ALARM button to snooze the alarm for 10 minutes.

12H

Model T83646 www.lacrossetechnology.com/support Page | 5

The snooze option can be repeated three times.

The alarm icon will flash while the snooze feature is active.

Note: While the alarm sounds, you may press any button except the TIME ALARM

button to turn the alarm off.

Temperature Alerts

Setting the temperature alerts are separate from turning the alerts ON or OFF.

Temperature alert buttons:

1. Hold the TEMP ALERTS button until the station beeps.

2. The temperature alert value will blink in set mode.

3. To adjust alert values press the DOWN or UP ARROW buttons.

4. Press the TEMP ALERTS button to confirm & move to the next alert.

Select Temperature Alert Values

Temperature Alert value will flash individually in the outdoor or indoor temperature area

when selected to be set. The alert is not active just from selecting the value. Hold the

TEMP ALERT button for five seconds to select and set temperature alert values. To

skip an alert value and move to the next, simply press the TEMP ALERT button again.

1. OUTDOOR HI alert will flash.

2. Press the ARROW buttons to set the alert value.

3. Press the TEMP ALERT button to confirm and switch to OUTDOOR LOW setting.

4. OUTDOOR LO alert will flash.

5. Press the ARROW buttons to set the alert value.

6. Press the TEMP ALERT button to confirm and switch to INDOOR HI setting.

7. INDOOR HI alert will flash.

8. Press the ARROW buttons to set the alert value.

9. Press the TEMP ALERT button to confirm and switch to INDOOR LOW setting.

10. INDOOR LO alert will flash.

11. Press the ARROW buttons to choose the value.

12. Press the TEMP ALERT button to confirm and exit.

Note: After selecting temperature alert values, use the next step to turn arm or disarm alerts.

One or all of the HI and LO temperature alerts may be set.

Range for indoor temperature alert: +32°F to +122°F (0°C to 50°C)

Range for outdoor temperature alert: -40°F to 140°F (-40°C to 60°C)

Arm/Disarm Temperature Alerts

Press & release TEMP ALERT button to view alerts in normal time display.

UP ARROW arms temperature alerts.

DOWN ARROW disarms temperature alerts.

ALERT BELL ICON appears when armed.

Note: When no temperature alerts are set, the Temperature Alert area will show ALERTS OFF.

1. In normal time mode, hold then release the TEMP ALERT button to toggle between:

oOutdoor HI

oOutdoor LO

oIndoor HI

oIndoor LO

2. Press the UP ARROW button to arm the selected alert.

3. The alert icon appears when alarm is activated.

4. Press the DOWN ARROW button to disarm the selected alert.

Model T83646 www.lacrossetechnology.com/support Page | 6

Active Alert

Beeps once per minute with flashing alert bell icon.

Press any button to stop the alert.

Temperature Trend Arrows

The indoor and outdoor temperature trend indicators will update every 30 minutes or less. These trends

represent temperature changes over the past three hours.

Example: At 1:00pm, the arrow indicates the change in temperature since 10:00am. At 1:30pm, the

arrow will indicate the temperature change since 10:30am.

UP: Temperature rose more than 2°F /1°C

RIGHT: Temperature has not changed more than 2°F /1°C

DOWN: Temperature fell more than 2°F /1°C

MIN/MAX Temperatures

The weather station provides the daily minimum and maximum temperatures each day starting at

midnight (12:00 AM). The weather station automatically resets the min/max temperatures at midnight

(12:00 AM).

View MIN data:

Press and release the MIN TEMP button to view the minimum Indoor and Outdoor Temperatures.

Reset MIN data:

Hold the MIN TEMP button for five seconds and the Indoor and all Outdoor

Minimum Temperatures will be reset.

The temperature area will show dashes briefly then return to current temperatures.

View MAX data:

Press and release the MAX TEMP button to view the maximum Indoor and Outdoor Temperatures.

Reset MAX data:

Hold the MAX TEMP button for five seconds and the Indoor and all Outdoor

Maximum Temperatures will be reset.

The temperature area will show dashes briefly then return to current temperatures.

Heat Index and Dew Point Temperature

Heat Index

Heat Index combines the effects of heat and humidity. It is the apparent temperature of how hot it feels to

a human being. As humidity increases, the body is unable to cool effectively; therefore, the temperature

will feel warmer.

View Heat Index: From a normal display, press the HEAT/DEW button once and Heat Index will show

instead of the outdoor ambient temperature.

Note: Heat index will be the same number as the temperature until the outdoor temperature is above 80

°F (26.7°C).

Dew Point Temperature

Dew Point Temperature is the saturation point of the air, or the temperature to which the air has to cool in

order to create condensation. The higher the dew points, the higher the moisture content of the air at a

given temperature.

View Dew Point Temperature: From a normal display, press the HEAT/DEW button twice and Dew

Point will show instead of the outdoor ambient temperature. The words Dew Point will show near outdoor

temperatures.

Note: Dew Point is lower than the actual temperature.

Model T83646 www.lacrossetechnology.com/support Page | 7

Outdoor Temperature/Humidity Flashing

1. Low battery icon present in the outdoor temperature area:

Change batteries in the transmitter and press the TX button.

Hold the HEAT/DEW button for three seconds and the weather station will search for the outdoor

transmitter again.

2. End of Transmission Range:

Move the transmitter closer to the weather station.

Avoid obstructions in the signal path.

Keep transmitter and weather station away from electronics.

Moon Phase

The Moon Phase is based on the date manually set on the weather station. The moon is divided by 6

sections, showing a total of 12 phases of the moon.

Waxing indicates growing or expanding illumination and happens after a new moon.

Waning indicates decreasing illumination and occurs after a full moon.

Crescent refers to the moon being less than half illuminated. Crescents can be waning or waxing.

Gibbous describes a moon phase when more than half is illuminated. Gibbous can be waxing or

waning.

New Moon occurs when the moon is between the earth and sun, so the illuminated portion of the

moon is on the back side facing the sun and we cannot see it. After a new moon, the illuminated

portion will increase or wax until the full moon occurs.

Full Moon occurs when the earth, moon and sun are in approximate alignment, with the moon and

the sun on opposite sides of the earth. The illuminated portion of the moon faces the earth, giving us

complete visibility of one side of the entire moon. After a full moon, the illuminated portion will

decrease or wane until the new moon occurs.

First Quarter and Last Quarter moons occur when the moon is at a 90 degree angle to the earth

and sun. We see half of the moon illuminated and the other half is in shadow.

Care and Maintenance

Do Not Mix Old and New Batteries

Do Not Mix Alkaline, Lithium, Standard or Rechargeable Batteries

Do not expose the weather station to extreme temperatures, vibration or shock. Keep dry.

Clean weather station with a soft damp cloth. Do not use solvents or scouring agents.

The weather station is not a toy. Keep it out of reach of children.

The weather station is not to be used for medical purpose or for public information. It is for home use

only.

The specifications of this weather station may change without prior notice.

Model T83646 www.lacrossetechnology.com/support Page | 8

Improper use or unauthorized opening of housing will void the warranty.

If the weather station does not work properly, change the batteries and/or check the AC cord

connection.

Low Battery Icon

Weather station: Icon displays in Indoor LCD section, replace batteries in the weather station.

Transmitter: Icon displays in Outdoor LCD section, replace batteries in the outdoor transmitter.

Power the Weather Station

Remove battery cover. Slide tab down and pull off to remove battery cover.

1. Install two new AA batteries according to the polarity markings.

Do Not Mix Old and New Batteries

Do Not Mix Alkaline, Lithium, Standard or Rechargeable Batteries

If the weather station does not display indoor temperature after 60 seconds, remove adapter and

batteries and wait for at least 60 seconds before repeating the setup process.

Install Batteries in the Outdoor Transmitter

1. Slide the battery cover down, then lift off the back of the transmitter.

2. Insert two new AA batteries into the transmitter. Observe the correct polarity.

3. Keep transmitter 5-10 ft. from the weather station during setup.

4. After 15 minutes, if the outdoor temperature shows on the weather station, you can

move the outdoor transmitter outside to a shaded location within range of the

weather station.

Search for Transmitter

Hold the SENSOR button to search for the outdoor transmitter.

The strength signal icon will animate until the sensor signal is received or for 3

minutes if no signal available.

Battery

Compartment

2 “AA”

Battery Cover

BACK

VIEW

Model T83646 www.lacrossetechnology.com/support Page | 9

Position the Weather Station

Choose a location for the weather station that is within range of the outdoor transmitter. The

weather station has a built in base stand to sit on a table or desk.

Choose a location 6 feet or more from electronics such as cordless phones, gaming systems,

televisions, microwaves, routers, baby monitors, etc., which can prevent signal reception.

Be aware of electrical wires and plumbing within a wall.

Best reception is achieved when the front or the back of the weather station is facing the

outdoor transmitter. This allows a larger portion of the antenna to receive a signal.

Position the Outdoor Transmitter

Once the weather station shows the outdoor temperature/humidity, place it and the transmitter in the

desired locations and wait approximately one-hour before permanently mounting the transmitter to ensure

that there is proper reception. The transmitter should be mounted vertically, in a shaded, protected area,

at least 6 feet from the ground to avoid damage and ensure accurate readings. The transmitter is water

resistant, not waterproof and should not be placed anywhere it will become submerged in water or subject

to standing water or snow. To achieve a true temperature/humidity reading, mount where direct sunlight

cannot reach the outdoor transmitter. Mount on a North-facing wall or in any well shaded area. Under an

eave or deck rail work well. The maximum transmitting range in open air is over 200 feet (60 meters).

Obstacles such as walls, windows, stucco, concrete, and large metal objects can reduce the range.

transmission.

Option 1:

Install one mounting screw (included) into a wall leaving approximately ½ of an inch

(12.7mm) extended.

Place the transmitter onto the screw, using the hanging hole on the backside.

Gently pull the transmitter down to lock the screw into place.

Option 2:

Insert the mounting screw through the front of the transmitter and into the wall.

Tighten the screw to snug (do not over tighten).

Specifications

Indoor:

Temperature Range:

+32°F to +122°F (0°C to 50°C)

Humidity Range:

19%-97% (RH)

Interval:

About every 30 seconds

Outdoor:

Temperature Range:

-40°F to 140°F (-40°C to 60°C)

Alkaline Batteries:

-20°F to 140°F (-28.8°C to 60°C)

Lithium Batteries:

-40°F to 140°F (-40°C to 60°C)

NOTE:

Temperatures below - 20°F

(-28.8°C) require Lithium batteries in the outdoor sensor.

Humidity Range:

19%-97% (RH)

Distance:

Over 200 ft. (60 meters) RF 433MHz (open air)

Interval:

About every 50 seconds

Power:

Weather Station:

2-AA, IEC, LR6 batteries (not included)

TX141TH-A Transmitter:

2-AA, IEC, LR6 batteries (not included)

Model T83646 www.lacrossetechnology.com/support Page | 10

Battery Life:

Weather Station:

Battery life is over 12 months when using reputable battery brands

for both Alkaline and Lithium batteries

TX141TH-A Transmitter:

Battery life is over 24 months when using reputable battery brands

for both Alkaline and Lithium batteries

Dimensions:

Weather Station:

5.40” L x 1.68” W x 4.40” H (137.2 mm L x 42.8 mm W x 111.8 mm)

TX141TH-A Transmitter:

1.57" x 0.79" x 5.12" (40 x 20 x 130mm)

Warranty and Support Information

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this

product relating to manufacturing defects in materials & workmanship.

View full warranty details online at:

www.lacrossetechnology.com/warranty_info.pdf

For warranty work, technical support or other information contact:

La Crosse Technology, Ltd

2817 Losey Blvd. S.

La Crosse, WI 54601

Contact Support:

1-608-782-1610

Product Registration: www.lacrossetechnology.com/support/register

Online Product Support: www.lacrossetechnology.com/t83646

Protected under U.S. Patents: 5,978,738, 6,076,044, 6,597,990

FCC Statement

This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) the device must accept any interference received, including

interference that may cause undesired operation.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY

UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER

AUTHORITY TO OPERATE THE EQUIPMENT

using electronic, mechanical or chemical procedures without written permission of the publisher.

This handbook may contain mistakes and printing errors. The information in this handbook is regularly checked and

corrections made in the next issue. We accept no liability for technical mistakes or printing errors, or their

consequences.

Scan for online

information

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology WD-3102U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7054U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9400U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9035U Bedienungsanleitung

La Crosse Technology

La Crosse Technology S88907 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1517U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2317 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9035U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1711BLV2 Abmessungen

La Crosse Technology

La Crosse Technology 327-1414Wv2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7390U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1416v2 Installationsanleitung

La Crosse Technology

La Crosse Technology WS-7047TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9121U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA86515 Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9013U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 327-1417BW Abmessungen

La Crosse Technology

La Crosse Technology WS-9029U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1425B Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2814U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9035U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WIRELESS 868 MHz Bedienungsanleitung

La Crosse Technology

La Crosse Technology 724-1409 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung